• Title/Summary/Keyword: Potential Shock

Search Result 289, Processing Time 0.022 seconds

Evaluation of Internal Blast Overpressures in Test Rooms of Elcetric Vehicles Battery with Pressure Relief Vents (압력배출구를 설치한 전동화 차량 배터리 시험실의 내부 폭압 평가)

  • Pang, Seungki;Shin, Jinwon;Jeong, Hyunjin
    • Journal of the Korean Society for Geothermal and Hydrothermal Energy
    • /
    • v.18 no.3
    • /
    • pp.7-18
    • /
    • 2022
  • Secondary batteries used in electric vehicles have a potential risk of ignition and explosion. Various safety measures are being taken to prevent these risks. A numerical study was performed using a computational fluid dynamics code on the cases where pressure relief vents that can reduce the blast overpressures of batteries were installed in the through-compression test room, short-circuit drop test room, combustion test room, and immersion test room in facilities rleated to battery used in electric vehicles. This study was conducted using the weight of TNT equivalent to the energy release from the battery, where the the thermal runaway energy was set to 324,000 kJ for the capacity of the lithium-ion battery was 90 kWh and the state of charge (SOC) of the battery of 100%. The explosion energy of TNT (△HTNT) generally has a range of 4,437 to 4,765 kJ/kg, and a value of 4,500 kJ/kg was thus used in this study. The dimensionless explosion efficiency coefficient was defined as 15% assuming the most unfavorable condition, and the TNT equivalent mass was calculated to be 11 kg. The internal explosion generated in a test room shows the very complex propagation behavior of blast waves. The shock wave generated after the explosion creates reflected shock waves on all inner surfaces. If the internally reflected shock waves are not effectively released to the outside, the overpressures inside are increased or maintained due to the continuous reflection and superposition from the inside for a long time. Blast simulations for internal explosion targeting four test rooms with pressure relief vents installed were herein conducted. It was found that that the maximum blast overpressure of 34.69 bar occurred on the rear wall of the immersion test room, and the smallest blast overpressure was calculated to be 3.58 bar on the side wall of the short-circuit drop test room.

Identification of heat shock protein70-2 and protamine-1 mRNA, proteins, and analyses of their association with fertility using frozen-thawed sperm in Madura bulls

  • Zulfi Nur Amrina Rosyada;Berlin Pandapotan Pardede;Ekayanti Mulyawati Kaiin;Ligaya I.T.A Tumbelaka;Dedy Duryadi Solihin;Bambang Purwantara;Mokhamad Fakhrul Ulum
    • Animal Bioscience
    • /
    • v.36 no.12
    • /
    • pp.1796-1805
    • /
    • 2023
  • Objective: This study aims to identify heat shock protein70-2 (HSP70-2) and protamine-1 (PRM1) mRNA and protein in Madura bull sperm and demonstrate their relation as bull fertility biomarkers. Methods: The Madura bull fertility rates were grouped based on the percentage of first service conception rate (%FSCR) as high fertility (HF) (79.04%; n = 4), and low fertility (LF) (65.84%; n = 4). mRNA of HSP70-2 and PRM1 with peptidylprolyl isomerase A (PPIA) as a housekeeping gene were determined by quantitative real-time polymerase chain reaction, while enzyme-linked immunoassay was used to measure protein abundance. In the post-thawed semen samples, sperm motility, viability, acrosome integrity, and sperm DNA fragmentation index were analyzed. Data analysis was performed on the measured parameters of semen quality, relative mRNA expression, and protein abundance of HSP70-2 and PRM1, among the bulls with various fertility levels (HF and LF) in a one-way analysis of variance analysis. The Pearson correlation was used to analyze the relationship between semen quality, mRNA, proteins, and fertility rate. Results: Relative mRNA expression and protein abundance of HSP70-2 and PRM1 were detected and were found to be highly expressed in bulls with HF (p<0.05) and were associated with several parameters of semen quality. Conclusion: HSP70-2 and PRM1 mRNA and protein molecules have great potential to serve as molecular markers for determining bull fertility.

Experimental study of antigenicity test of Sweet Bee Venom in Guinea Pigs (기니픽을 이용한 Sweet Bee Venom의 항원성 평가)

  • Cho, Byung-Jun;Kwon, Ki-Rok
    • Journal of Pharmacopuncture
    • /
    • v.14 no.4
    • /
    • pp.23-32
    • /
    • 2011
  • Objectives: This study was performed to examine the antigenic potential of pure melittin (Sweet Bee Venom - SBV) extracted from the bee venom by utilizing protein isolation method of gel filtration. Methods: All experiments were conducted at Biotoxtech (Chungwon, Korea), authorized a non-clinical studies institution, under the regulations of Good Laboratory Practice (GLP). Antigenic potential of SBV was examined by active systemic anaphylaxis (ASA) and passive cutaneous anaphylaxis (PCA) in guinea pigs. SBV was subcutaneously administered at 0.07 and 0.28mg/kg and also as a suspension with adjuvant (Freund's complete adjuvant: FCA). Ovalbumin (OVA) as a suspension with adjuvant was used to induce positive control response ($5mg/m{\ell}$-FCA). Results: 1. In the ASA test, experimental groups showed some symptoms of anaphylaxis like piloerection, hyperpnea and staggering gait. 2. In the PCA test, low dosage group did not show any antibody responses, whereas high dosage group showed positive responses. 3. In the weight measurement and clinical observation, experimental groups didn't show any significant changes compared with control group. 4. In the autopsy of body, the abnormalities of lung were detected in the corpse. This means that the cause of death may induced anaphylactic shock. Conclusions: Above findings suggested that SBV had antigenic potential in guinea pig. Further studies on the subject should be conducted to yield more concrete evidences.

Discovering the Anti-cancer Effects of Ligusticum Chuanxiong through Network-based Pharmacology Analysis and Molecular Docking: An Inquiry into Natural Products (네트워크 기반 약리학 분석 및 분자 도킹을 통한 천궁의 항암 효과 예측: 천연물에 대한 탐구)

  • Do Kyung Han;Jee Won Shon;Eui Suk Sung;Youn Sook Kim;Won G. An
    • Journal of Life Science
    • /
    • v.33 no.11
    • /
    • pp.876-886
    • /
    • 2023
  • In some cases of head and neck cancers (HNC), surgical interventions may result in the loss of organs and/or changes to their functions, thereby significantly affecting the patient's quality of life. As a result, the surgical treatment of HNC patients is often limited to specific cases, and alternative treatment modalities, such as chemotherapy, are considered. However, serious adverse effects caused by chemotherapy, such as severe nausea and vomiting, necessitate the need for the development of adjunctive methods to minimize patient suffering. Chuanxiong, Ligusticum chuanxiong (L. chuanxiong), is a natural herb used in Eastern medicine to treat cerebrovascular disorders and headaches. This study aimed to predict the effect and potential of L. chuanxiong as an auxiliary anticancer drug through network-based pharmacology and molecular docking analysis. The study results showed that 40 out of 41 genes of L. chuanxiong shared common targets of HNC and their proteins could be used to target HNC cells to prevent cancer progression. The results of the functional enrichment analysis confirmed that L. chuanxiong is associated with the neuroactive-ligand metabolism and neurotransmitter pathways, indicating its potential medicinal value as an adjuvant in HNC treatment. Lastly, our findings demonstrated that the active ingredient of L. chuanxiong, (Z)-Ligustilide, has the ATP binding site of heat shock protein 90, a protein known to promote the activation of cancer cells. These results suggest that L. chuanxiong is a promising candidate for developing auxiliary anticancer drugs, and further research could potentially lead to the discovery of newer and safer anti-cancer agents.

Test methodology of acceleration life test on feeder cable assembly (Feeder Cable Assembly의 가속수명시험법 개발)

  • Han, Hyun Kak
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.8
    • /
    • pp.62-68
    • /
    • 2016
  • The feeder cable assembly is an automotive part used for telecommunication. If it malfunctions, the control and safety of the automobile can be put at risk. ALT (Accelerated Life Testing) is a testing process for products in which they are subjected to conditions (stress, strain, temperatures, etc.) in excess of their normal service parameters in an attempt to uncover faults and potential modes of failure in a short amount of time. Failure is caused by defects in the design, process, quality, or application of the part, and these defects are the underlying causes of failure or which initiate a process leading to failure. Thermal shock occurs when a thermal gradient causes different parts of an object to expand by different amounts. Thermal shock testing is performed to determine the ability of parts and components to withstand sudden changes in temperature. In this research, the main causes of failure of the feeder cable assembly were snapping, shorting and electro-pressure resistance failure. Using the Coffin-Manson model for ALT, the normal conditions were from Tmax = $80^{\circ}C$ to Tmin = $-40^{\circ}C$, the accelerated testing conditions were from Tmax = $120^{\circ}C$ to Tmin = $-60^{\circ}C$, the AF (Acceleration Factor) was 2.25 and the testing time was reduced from 1,000 cycles to 444 cycles. Using the Bxlife test, the number of samples was 5, the required life was B0.04%.10years, in the acceleration condition, 747 cycles were obtained. After the thermal shock test under different conditions, the feeder cable assembly was examined by a network analyzer and compared with the Weibull distribution modulus parameter. The results obtained showed good results in acceleration life test mode. For the same reliability rate, the testing time was decreased by a quarter using ALT.

Experimental study on the vertical bearing behavior of nodular diaphragm wall in sandy soil based on PIV technique

  • Jiujiang Wu;Longjun Pu;Hui Shang;Yi Zhang;Lijuan Wang;Haodong Hu
    • Geomechanics and Engineering
    • /
    • v.35 no.2
    • /
    • pp.195-208
    • /
    • 2023
  • The nodular diaphragm wall (NDW) is a novel type of foundation with favorable engineering characteristics, which has already been utilized in high-rise buildings and high-speed railways. Compared to traditional diaphragm walls, the NDW offers significantly improved vertical bearing capacity due to the presence of nodular parts while reducing construction time and excavation work. Despite its potential, research on the vertical bearing characteristics of NDW requires further study, and the investigation and visualization of its displacement pattern and failure mode are scant. Meanwhile, the measurement of the force component acting on the nodular parts remains challenging. In this paper, the vertical bearing characteristics of NDW are studied in detail through the indoor model test, and the displacement and failure mode of the foundation is analyzed using particle image velocimetry (PIV) technology. The principles and methods for monitoring the force acting on the nodular parts are described in detail. The research results show that the nodular part plays an essential role in the bearing capacity of the NDW, and its maximum load-bearing ratio can reach 30.92%. The existence of the bottom nodular part contributes more to the bearing capacity of the foundation compared to the middle nodular part, and the use of both middle and bottom nodular parts increases the bearing capacity of the foundation by about 9~12% compared to a single nodular part of the NDW. The increase in the number of nodular parts cannot produce a simple superposition effect on the resistance born by the nodular parts since the nodular parts have an insignificant influence on the exertion and distribution of the skin friction of NDW. The existence of the nodular part changes the displacement field of the soil around NDW and increases the displacement influence range of the foundation to a certain extent. For NDWs with three different nodal arrangements, the failure modes of the foundations appear to be local shear failures. Overall, this study provides valuable insights into the performance and behavior of NDWs, which will aid in their effective utilization and further research in the field.

A Study on the Safety Assessment and Damage Pattern of Water Purifier Compressors (정수기용 압축기의 안전성 평가 및 소손 패턴 분석에 관한 연구)

  • Choi, Chung-Seog
    • Journal of the Korean Society of Safety
    • /
    • v.28 no.2
    • /
    • pp.21-25
    • /
    • 2013
  • The purpose of this study is to provide basic data for the safety assessment of a water purifier when water leaks due to inappropriate maintenance and the examination of the cause of accidents related to the leak. Due to its inspection and management by non-specialists, if a leak occurs in a water purifier with the water level controller being inclined, it may result in the failure of the compressor, power supply line, PCB, etc. The analysis of the thermal diffusion pattern of water purifier compressors using a thermal image camera shows that its maximum temperature was approximately $80^{\circ}C$. In addition, its operating current was a maximum of 13 A and the system's operating current was approximately 1.7 A after the compressor was charged. It was found that the housing type power cable cover of the compressor had the effect of preventing electric shock but has poor flame resistance. Furthermore, the performance of the overload protector, PTC relays, etc., was excellent but they have potential for problems as metallic terminals were exposed, resulting in the potential of a safety related accident. The terminals and their surface damaged by the tracking showed a trace of carbonization and the resistance between terminals was measured to be approximately $8{\Omega}$. In addition, while the tracking was proceeding, the fuse and circuit breaker installed for system protection did not operate.

Characterization of Pathogenesis and Plant Defence-related Genes Against Potato virus X infection empolying Potato X virus expresssin vector

  • Park, Mi-Ri;Kwon, Sun-Jung;Kim, Kook-Hyung
    • Proceedings of the Korean Society of Plant Pathology Conference
    • /
    • 2003.10a
    • /
    • pp.74.1-74
    • /
    • 2003
  • Differential display (DD) of mRNA is a technique in which mRNA species expressed by a cell population are reverse transcribed and then amplified by many separate polymerase chain reactions (PCR). Using DD-RT-PCR we obtained many genes that expressed differentially in healthy and PVX-infected Nicotiana benthamima, using total RNAs extracted from healthy and PVX-infected N. benthamiana plants. Three hundred and twenty-five DNA fragments isolated from DD-RT-PCR were cloned and sequenced for further characterization. Several host genes including SKPI-like protein, heat shock transcription factor and Avr9/Cf-9 rapidly elicited protein were selected to obtain full-length open reading frame and to characterize their potential involvement in virus disease development and/or host's defense against virus infection employing PVX-based expression vector. Transcrips from wild-type and clones containing each selected gene were inoculated onto N. benthamiana Levels of virus replication were confirmedby RT-PCR and RNA blot analysis, Expression profiles and potential role(s) of selected genes upon PVX infection will be discussed.

  • PDF

Expansion of the equilibrium constants for the temperature range of 300K to 20,000K

  • Kim, Jae Gang
    • International Journal of Aeronautical and Space Sciences
    • /
    • v.17 no.4
    • /
    • pp.455-466
    • /
    • 2016
  • Chemical-kinetic parameters of the equilibrium constants to evaluate the reverse rate coefficients in the shock layer of a blunt body and the expanding flows are derived for the temperature range from 300 K to 20,000 K. The expanded equilibrium constants for the chemical reactions of the dissociation, ionization, associative ionization, and neutral and charge exchange reactions of the atmospheric species and carbon materials are proposed in the present work. In evaluating the equilibrium constants, the inter-nuclear potential energies of the molecular species are calculated by the analytical potential function of the Hulburt-Hirschfelder model, and the parameters of the analytical model are determined from the semi-classically calculated RKR potentials. The electronic states and energies of the atoms are calculated by the electronic energy grouping model, and the rovibrational states and energies of each electronic states of the molecules are evaluated by the WKB method. The expanded equilibrium constants for 31 types of the reactions are provided for the best curve-fit functions, and the recombination reaction rate coefficients evaluated from the present equilibrium constants are compared with existing measured values.

Mitigating Economy Risk in The Digital Era Through Export Diversification

  • RENTNOSARI, Lili;RAMANA, Febria
    • The Journal of Industrial Distribution & Business
    • /
    • v.10 no.9
    • /
    • pp.19-24
    • /
    • 2019
  • Purpose - In the digital era, technology advancement enables goods and services to be produced more efficiently but also create economy risk in the global economy including Indonesia. Previous studies stated that the risk can be mitigated through export diversification. This study investigates strategy to expand the markets for existing products and explore the potential market. Research design, data, and methodology - The criteria was followed using a review and considerations combination through the Focus Group Discussion (FGD) to determine the priority product in trading house of Indonesia. This study implemented market share to explore those products' markets and compare it to other ASEAN countries. Results - The Indonesian potential products are T-shirts, singlets and other vests of textile materials, knitted or crocheted (excluding cotton); food preparations; medicaments consisting of mixed or unmixed products for therapeutic or prophylactic purposes; soap in the form of flakes, granules, powder, paste or in aqueous solution; and cocoa powder, not containing added sugar or other sweetening matter. The market analysis also showed that Indonesia still had not optimally accessed yet the largest market in the world for each product. Conclusions - The government should focus more on increasing the competitiveness of those products, particularly in those global marketplaces.