• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.699-703
• /
• 2002

In order to see the effect of pH on the formation of ettringite, pH was controlled with addition of boric acid, hydrochloric acid, nitric acid and potassium hydroxide during the formation of ettringite. The behavior of ettringite formation was discussed with XRD, SEM analysis. The result was that ettringite was unstablely formed with stabilization of aluminate gel and gypsum at below PH 10.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.83-89
• /
• 1999

Bast fibers of paper mulberry ( Broussonetia Kazinoki Sieb) were cooked with a weak alkaline salt, potassium carbonate which has been known as a major inorganic component of the traditional lye, and its cooking characteristics were investigated . The bast fiber was easily cooked by potassium carbonate. The pulp yield was rapidly decreased up to 20-30 mol of potassium carbonate, but the Kappa number was slowly decreased with increasing of potassium carbonate. The potassium carbonate pulps were easily defibered at low cooking chemical charge of 25mm on and high pulp yield of about 80%. These results were confirmed that pectin was easily removed during the potassium carbonate cooking. In contrast, when sodium carbonate was used as a cooling agent, the bast fiber was only partially defibered. Thus, sodium carbonate was a less effective cooling chemical of the bast fiber. The results of this experiment indicated that potassium carbonate could not only be used as a good cooling agent of bast fiber, but also as an alternative agent of sodium hydroxide.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.159-167
• /
• 2022

The present study assessed the micro structure and durability characteristics of ternary blended cement with different types of alkali activators. Ground granulated blast furnace slag(GGBS) and ferronickel slag(FNS) was replaced until 50 % of the weight of cement. In addition, potassuim hydroxide and sodium hydroxide were used for comparing the properties of different type of alkali activator. Ternary blended cement with alkali activators showed higher peak portlandite peak than that of OPC(Ordinary Portlande Cement) and non activated ternary blended cement. Also, there was no new hydration products in ternary blended cement or/and alkali activators. Based on the mercury intrustion porosimetry(MIP) test result, ternary blended cement increased macro pore while alkali activated ternary blended cement modified pore structure and increased microp pore as compared to OPC as control. Combination with alkali activators is desirable to enhance the compressive strength and freeze thaw resistance.