• 한국군사과학기술학회지
• /
• 제22권5호
• /
• pp.616-624
• /
• 2019

In order to understand flying aircraft, satellite, missile, etc, a telemetry ground system is used to receive, record, and process the transmitted radio signal from vehicles. In some cases, a line-of-sight communication is not possible along to the trajectory of vehicles, and multipath fading result in a shade area of communication. A number of telemetry ground systems are installed to overcome this limitation, and acquire the transmitted signal seamlessly. The telemetry signals received by multiple independent ground systems have independent probability of errors since they experienced their own communication channels. In other words, we can exploit the independent error characteristics of received signals by processing them in a hybrid method. The optimum hybrid post-process method is proposed in this study, and applied to process telemetry signals acquired from flight tests.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.27-35
• /
• 1993

In this paper, a new algorithm for high level security and quality of speech is proposed. The algorithm is based on the rearrangement of the fast fourier transform (FFT) coefficients with pre and post filter process, hamming window and adaptive pseudo spectrum insertion. Then, the pre and post filters are used for the whitening of speech spectrum and the adaptive pseudo spectrum is inserted for the unclassification of silence/speech. Also, the hamming window technique is applied for the robustness to the syncronization error in the telephone line. According to the simulation results, it can be seen that the security of scrambled signal and the quality of descrambled signal have been improved fairly in both subjective and objective performance test and the new FFT scrambler is robust to the synchronization error.

• The Journal of Korean Physical Therapy
• /
• 제14권4호
• /
• pp.487-497
• /
• 2002

The fatigue process of the triceps surae was evaluated during a standing heel-rise test, comparising of pre-fatigue and post-fatigue. Sixteen healthy subjects with a mean age of 22.88 years participated. The heel-rise test was performed until exhaustion, and electromyographic activity expressed as mean value and root mean square of the gastrocnemius and soleus muscles were calculated. The average number of heel-rise performed was 63.69$\pm$26.10. The result of this present study indicate that the EMG signal is sensitive to the different muscle fatigue. Mean value and RMS decreased significantly in after fatigue. Significant difference were found between the pre-fatigue and post-fatigue in the total subjects. But there were no significant changes in mean and RMS between the male and female during standing heel-rise test. The present results, showing decreased EMG signal in the triceps surae, could be used as reference when testing the fatigue process in different clinical conditions. Recommendations for standardization of a heel-rise test are given.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.156-161
• /
• 1992

본 연구에서는 이송축 직류 서보 모터의 전류신호와 NC정보를 이용해서 선삭 가공상태를 감시하는 시스템을 개발하였다. 모터 전류는 가공 부하의 상태를 잘 나 타내며, NC 장치에 내장되어 있기 때문에 신호 검출을 위한 별도의 센서가 필요 없어 서 공구가 수시로 바뀌는 NC작업 감시를 위한 유효한 신호이다. 또 NC 정보로부터 작업을 예측함으로써 감시 대상을 명확히 하고 신뢰성을 높이고자 하였다. 전체적인 감시 시스템의 프로그래밍 언어로는 C를 사용하여, 실시간 감시처리를 가능하게 하였 다.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.152-165
• /
• 1998

This study proposes the analysis and evaluation method of time series ultrasonic signal using the chaoral post-process system for precision rate enhancement of ultrasonic pattern recognition. Chaos features extracted from time series data for analysis quantitatively weld defects For this purpose, feature extraction objectives in this study are fractal dimension, Lyapunov exponent, shape of strange attrator. Trajectory changes in the strange attractor indicated that even same type of defects carried substantial difference in chaoticity resulting from distance shifts such as nearby 0.5, 1.0 skip distance. Such difference in chaoticity enables the evaluation of unique features of defects in the weld zone. In quantitative chaos fenture extraction, feature values of 0.835 and 0.823 in the case of slag inclusion and 0.609 and 0.573 in the case of crack were suggested on the basis of fractal dimension and Lyapunov exponent. Proposed chaoral post-process system in this study can enhances precision rate of ultrasonic pattern recognition results from defect signals of weld zone, such as slag inclusion and crack.

• 한국시뮬레이션학회논문지
• /
• 제26권3호
• /
• pp.65-72
• /
• 2017

함정 전투실험의 사후분석에서는 객체에 대한 자함의 표적 탐지능력와 무장 교전능력을 분석한다. 따라서 사후분석을 위해서는 전장 환경의 위협 객체와 센서에서 탐지한 표적간 연관 맺을 수 있는 정보가 필요하다. 기존의 공학급 교전 시뮬레이터는 이러한 객체-표적 연관정보를 제공하였다. 그러나 사용된 시뮬레이터의 잠수함모델에는 실제 소나시스템의 신호처리 알고리즘이 탑재되어있다. 소나신호처리 과정을 통해 얻은 표적정보에서는 실제 객체정보가 무엇인지 연관지을 수 없으며, 사용된 시뮬레이터도 그러한 정보를 제공하지 않고 있다. 따라서 본 연구에서는 객체정보와 소나신호처리에서 얻은 표적의 방위각, 거리, 속도 등의 기동정보를 이용하여 객체-표적 연관정보를 생성하였다. 객체-표적 연관정보를 생성하는 방법을 제안하고, 제안한 방법의 타당성을 실험을 통해 검증하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.197-204
• /
• 2006

The purpose of this study is to evaluate the AE characteristics for the basemetal, PWHT (post-weld heat treatment) and weldment specimens of SA-516 steel during fracture testing. Four-point bending and AE tests were conducted simultaneously. AE signals were emitted in the process of plastic deformation. AE signal strength and amplitude of the weldment was the strongest, followed by PWHT specimen and basemetal. More AE signals were emitted from the weldment samples because of the oxides, and discontinuous mechanical properties. AE signal strength and amplitude for the basemetal or PWHT specimen decreased remarkably compared to the weldment because of lower strength. Pre-cracked specimens emitted even lower event counts than the corresponding blunt notched specimens. Dimple fracture from void coalescence mechanism is associated with low-level AE signal strength for the basemetal or PWHT. Tearing mode and dimple formation were shown on the fracture surfaces of the weldment, but only a small fraction produced detectable AE.

• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.1-9
• /
• 1992

Radio data system is a next-generation broadcasting system of digital information communication which multiplexes the digital data into the FM stereo signal in VHF/FM band and provides important and convenient service features. And radio data are composed of groups which are divided into 4 blocks with information word and check word. In this paper, radio data receiver is developed which recovers and process radio data to provide services. Then we confirm that 7dB SNR is required to be 10S0-5TBER of demodulation. Deconding process of shortened-cyclic-decoder has been simulated by computer. Also, the time-compression (by 16 times) method has been adopted for the RDS features post-processing. Via the error probability calculation, simulation and experimentation, the developed receiver system is proved to satisfy the system specification of EBU and implemented by general logic gates and analog circuits.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.243-246
• /
• 2003

In this paper, we propose a new digital audio watermarking technique with the wavelet transform. The watermark is embedded by eliminating unnecessary information of audio signal based on human auditory system (HAS). This algorithm is an audio watermarking method, which does not require any original audio information in watermark extraction process. In this paper, the masking effect is used for audio watermarking, that is, post-tempera] masking effect. We construct the window with the synchronization signal and we extract the best frame in the window by using the zero-crossing rate (ZCR) and the energy of the audio signal. The watermark may be extracted by using the correlation of the watermark signal and the portion of the frame. Experimental results show good robustness against MPEG1-layer3 compression and other common signal processing manipulations. All the attacks are made after the D/A/D conversion.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.121-128
• /
• 2008

Modularized GPS software defined radio (SDR) has many advantages of applying and modifying algorithm. Hardware based GPS receiver uses many hardware parts (such as RF front, correlators, CPU and other peripherals) that process tracked signal and navigation data to calculate user position, while SDR uses software modules, which run on general purpose CPU platform or embedded DSP. SDR does not have to change hardware part and is not limited by hardware capability when new processing algorithm is applied. The weakness of SDR is that software correlation takes lots of processing time. However, in these days the evolution of processing power of MPU and DSP leads the competitiveness of SDR against the hardware GPS receiver. This paper shows a study of modulization of GPS software platform and it presents development of the GNSS software platform using MATLAB Simulink™. We focus on post processing SDR platform which is usually adapted in research area. The main functions of SDR are GPS signal acquisition, signal tracking, decoding navigation data and calculating stand alone user position from stored data that was down converted and sampled intermediate frequency (IF) data. Each module of SDR platform is categorized by function for applicability for applying for other frequency and GPS signal easily. The developed software platform is tested using stored data which is down-converted and sampled IF data file. The test results present that the software platform calculates user position properly.