• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.616-624
• /
• 2019

In order to understand flying aircraft, satellite, missile, etc, a telemetry ground system is used to receive, record, and process the transmitted radio signal from vehicles. In some cases, a line-of-sight communication is not possible along to the trajectory of vehicles, and multipath fading result in a shade area of communication. A number of telemetry ground systems are installed to overcome this limitation, and acquire the transmitted signal seamlessly. The telemetry signals received by multiple independent ground systems have independent probability of errors since they experienced their own communication channels. In other words, we can exploit the independent error characteristics of received signals by processing them in a hybrid method. The optimum hybrid post-process method is proposed in this study, and applied to process telemetry signals acquired from flight tests.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.27-35
• /
• 1993

In this paper, a new algorithm for high level security and quality of speech is proposed. The algorithm is based on the rearrangement of the fast fourier transform (FFT) coefficients with pre and post filter process, hamming window and adaptive pseudo spectrum insertion. Then, the pre and post filters are used for the whitening of speech spectrum and the adaptive pseudo spectrum is inserted for the unclassification of silence/speech. Also, the hamming window technique is applied for the robustness to the syncronization error in the telephone line. According to the simulation results, it can be seen that the security of scrambled signal and the quality of descrambled signal have been improved fairly in both subjective and objective performance test and the new FFT scrambler is robust to the synchronization error.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.487-497
• /
• 2002

The fatigue process of the triceps surae was evaluated during a standing heel-rise test, comparising of pre-fatigue and post-fatigue. Sixteen healthy subjects with a mean age of 22.88 years participated. The heel-rise test was performed until exhaustion, and electromyographic activity expressed as mean value and root mean square of the gastrocnemius and soleus muscles were calculated. The average number of heel-rise performed was 63.69$\pm$26.10. The result of this present study indicate that the EMG signal is sensitive to the different muscle fatigue. Mean value and RMS decreased significantly in after fatigue. Significant difference were found between the pre-fatigue and post-fatigue in the total subjects. But there were no significant changes in mean and RMS between the male and female during standing heel-rise test. The present results, showing decreased EMG signal in the triceps surae, could be used as reference when testing the fatigue process in different clinical conditions. Recommendations for standardization of a heel-rise test are given.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.156-161
• /
• 1992

In this research a monitoring system for turning using NC information and the current of feed motor as a monitoring signal was developed. The overall system consists of modules such as learning process, NC data transmission, generation of forecast information, signal acquisition, monitoring and post process. In the learning process, the reference data and the cutting force equation necessary for monitoring are obtained from the accumulated monitoring results. In the generation of forecast information, the information of forecasted cutting forces is acquired from the cutting force equation and NC program and appended to each NC block as a monitor code. Reliability of monitoring is improved by using the monitor code in the real-time monitoring. Monitoring module is divided into two parts : the off-line monitoring where errors of NC program are checked and the on-line monitoring where the level of motor current is monitored during cutting operations. If the actual current level exceeds the limit value provided by the monitor code in the level monitoring, it is recognized as abnormal. In the event of abnormal status, the post processor sends the emergency stop signal to NC controller to stop the operation. Actual experiments have shown that the developed monitoring system works well.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.152-165
• /
• 1998

This study proposes the analysis and evaluation method of time series ultrasonic signal using the chaoral post-process system for precision rate enhancement of ultrasonic pattern recognition. Chaos features extracted from time series data for analysis quantitatively weld defects For this purpose, feature extraction objectives in this study are fractal dimension, Lyapunov exponent, shape of strange attrator. Trajectory changes in the strange attractor indicated that even same type of defects carried substantial difference in chaoticity resulting from distance shifts such as nearby 0.5, 1.0 skip distance. Such difference in chaoticity enables the evaluation of unique features of defects in the weld zone. In quantitative chaos fenture extraction, feature values of 0.835 and 0.823 in the case of slag inclusion and 0.609 and 0.573 in the case of crack were suggested on the basis of fractal dimension and Lyapunov exponent. Proposed chaoral post-process system in this study can enhances precision rate of ultrasonic pattern recognition results from defect signals of weld zone, such as slag inclusion and crack.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.65-72
• /
• 2017

We propose a method to generate the object-target identifier mapping information for system performance and effectiveness analysis of submarine engage system and verify the validity of the proposed method through experiments. In the submarine model of the engage simulator, the signal processing algorithm of the actual sonar system is installed. In the target information obtained through the sonar or signal processing process, the actual object information is not known, and the simulator does not provide such information. Therefore, in this study, we generated identifier mapping information for simulation post-analysis by using bearing, range, and speed of the target obtaind from sonar signal processing and the object collected.

• Journal of Mechanical Science and Technology
• /
• v.20 no.2
• /
• pp.197-204
• /
• 2006

The purpose of this study is to evaluate the AE characteristics for the basemetal, PWHT (post-weld heat treatment) and weldment specimens of SA-516 steel during fracture testing. Four-point bending and AE tests were conducted simultaneously. AE signals were emitted in the process of plastic deformation. AE signal strength and amplitude of the weldment was the strongest, followed by PWHT specimen and basemetal. More AE signals were emitted from the weldment samples because of the oxides, and discontinuous mechanical properties. AE signal strength and amplitude for the basemetal or PWHT specimen decreased remarkably compared to the weldment because of lower strength. Pre-cracked specimens emitted even lower event counts than the corresponding blunt notched specimens. Dimple fracture from void coalescence mechanism is associated with low-level AE signal strength for the basemetal or PWHT. Tearing mode and dimple formation were shown on the fracture surfaces of the weldment, but only a small fraction produced detectable AE.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.1-9
• /
• 1992

Radio data system is a next-generation broadcasting system of digital information communication which multiplexes the digital data into the FM stereo signal in VHF/FM band and provides important and convenient service features. And radio data are composed of groups which are divided into 4 blocks with information word and check word. In this paper, radio data receiver is developed which recovers and process radio data to provide services. Then we confirm that 7dB SNR is required to be 10S0-5TBER of demodulation. Deconding process of shortened-cyclic-decoder has been simulated by computer. Also, the time-compression (by 16 times) method has been adopted for the RDS features post-processing. Via the error probability calculation, simulation and experimentation, the developed receiver system is proved to satisfy the system specification of EBU and implemented by general logic gates and analog circuits.

• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.243-246
• /
• 2003

In this paper, we propose a new digital audio watermarking technique with the wavelet transform. The watermark is embedded by eliminating unnecessary information of audio signal based on human auditory system (HAS). This algorithm is an audio watermarking method, which does not require any original audio information in watermark extraction process. In this paper, the masking effect is used for audio watermarking, that is, post-tempera] masking effect. We construct the window with the synchronization signal and we extract the best frame in the window by using the zero-crossing rate (ZCR) and the energy of the audio signal. The watermark may be extracted by using the correlation of the watermark signal and the portion of the frame. Experimental results show good robustness against MPEG1-layer3 compression and other common signal processing manipulations. All the attacks are made after the D/A/D conversion.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2008

Modularized GPS software defined radio (SDR) has many advantages of applying and modifying algorithm. Hardware based GPS receiver uses many hardware parts (such as RF front, correlators, CPU and other peripherals) that process tracked signal and navigation data to calculate user position, while SDR uses software modules, which run on general purpose CPU platform or embedded DSP. SDR does not have to change hardware part and is not limited by hardware capability when new processing algorithm is applied. The weakness of SDR is that software correlation takes lots of processing time. However, in these days the evolution of processing power of MPU and DSP leads the competitiveness of SDR against the hardware GPS receiver. This paper shows a study of modulization of GPS software platform and it presents development of the GNSS software platform using MATLAB Simulink™. We focus on post processing SDR platform which is usually adapted in research area. The main functions of SDR are GPS signal acquisition, signal tracking, decoding navigation data and calculating stand alone user position from stored data that was down converted and sampled intermediate frequency (IF) data. Each module of SDR platform is categorized by function for applicability for applying for other frequency and GPS signal easily. The developed software platform is tested using stored data which is down-converted and sampled IF data file. The test results present that the software platform calculates user position properly.