• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.329-330
• /
• 2011

This paper concerns to the acquisition of Global Positioning System L1 C/A coded signals. It specifically addresses the issues of acquiring very low power signals which are attenuated due to special circumstances such as indoor environment or forest canopy etc. The proposed post-processing algorithm applies modified signal folding coherent integration scheme on weak signal record. It dynamically compensates the doppler effect on the length of C/A code before integrating the signal power. Experimental results show effectiveness of the algorithm on weak GPS signals recorded in a real environment.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.56-63
• /
• 2023

This paper presents a method using finite element analysis and topology optimization to address the issue of overdesign in pressure-explosion proof enclosure doors for semiconductor manufacturing processes. The design conducted in this paper focuses on the pattern design of the enclosure door and its fixation components. The process consists of a solid-filled model, a topology optimization model, and a post-processing model. By applying environmental conditions to each model and comparing the maximum displacement, maximum equivalent stress, and weight values, it was confirmed that a reduction of about 13% in weight is achievable.

• Food Science of Animal Resources
• /
• v.40 no.3
• /
• pp.415-425
• /
• 2020

It is believed that two main proteolytic systems are involved in the tenderization of meat: the cathepsins and the calpains. Many researchers consider the calpain system to be the major contributor to meat tenderness during post-mortem storage. However, the role and activity of cathepsins during post-mortem storage or low temperature meat processing is unclear, particularly for the tough meat cuts like brisket. Thus, the study was designed to investigate the effects of cold (refrigerated and frozen) storage and sous vide processing on the activities of cathepsin B, H, and L in beef brisket. There were no significant changes in pH and cathepsin H activity throughout the 18 d of storage at both temperatures. However, an increase in cathepsin B activity was observed during the first 4 d at both storage temperatures, but subsequently the activity remained unchanged. Cathepsins B and L were found to be more heat stable at sous vide temperatures (50℃ for 24 h, 55℃ for 5 h and at 60℃ and 70℃ for 1 h) compared to cathepsin H. Cathepsin B+L activity was found to increase after sous vide cooking at 50℃ for 1 h but decreased to about 47% relative to the uncooked control after 24 h of cooking. These results suggest that cathepsins B and L may contribute to the improved meat tenderness usually seen in sous vide cooked brisket meat.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.616-624
• /
• 2019

In order to understand flying aircraft, satellite, missile, etc, a telemetry ground system is used to receive, record, and process the transmitted radio signal from vehicles. In some cases, a line-of-sight communication is not possible along to the trajectory of vehicles, and multipath fading result in a shade area of communication. A number of telemetry ground systems are installed to overcome this limitation, and acquire the transmitted signal seamlessly. The telemetry signals received by multiple independent ground systems have independent probability of errors since they experienced their own communication channels. In other words, we can exploit the independent error characteristics of received signals by processing them in a hybrid method. The optimum hybrid post-process method is proposed in this study, and applied to process telemetry signals acquired from flight tests.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.2
• /
• pp.123-131
• /
• 2012

The requirements for computational resources to perform the structural analysis are increasing rapidly. The size of the current analysis problems that are required from practical industry is typically large-scale with more than millions degrees of freedom (DOFs). These large-scale analysis problems result in the requirements of high-performance analysis codes as well as hardware systems such as supercomputer systems or cluster systems. In this paper, the pre- and post-processing system for supercomputing based large-scale structural analysis is presented. The proposed system has 3-tier architecture and three main components; geometry viewer, pre-/post-processor and supercomputing manager. To analyze large-scale problems, the ADVENTURE solid solver was adopted as a general-purpose finite element solver and the supercomputer named 'tachyon' was adopted as a parallel computational platform. The problem solving performance and scalability of this structural analysis system is demonstrated by illustrative examples with different sizes of degrees of freedom.

• Journal of Internet Computing and Services
• /
• v.21 no.3
• /
• pp.41-51
• /
• 2020

EDISON is a web-based platform that provides easy and convenient use of simulation software on high-performance computers. One of the most important roles of a computational science platform, such as EDISON, is to post-process and represent the simulation results data so that the user can easily understand the data. We interviewed EDISON users and collected requirements for post-processing and represent of simulation results, which included i) flexible data representation, ii) supporting various data representation components, and iii) flexible and easy development of view template. In previous studies, it was difficult to develop or contribute data representation components, and the view templates were not able to be shared or recycled. This causes a problem that makes it difficult to create ecosystems for the representation tool development of numerous simulation software. EDISON-VIEW is a framework for post-processing and representing simulation results produced from the EDISON platform. This paper proposes various methods used in the design and development of the EDISON-VIEW framework to solve the above requirements and problems. We have verified its usefulness by applying it to simulation software in various fields such as material, computational fluid dynamics, computational structural dynamics, and computational chemistry.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2001.06a
• /
• pp.118-118
• /
• 2001

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8351-8358
• /
• 2016

Electronic cleansing is an image post processing technique in which the tagged colonic content is subtracted from colon using CTC images. There are post processing artefacts, like: 1) soft tissue degradation; 2) incomplete cleansing; 3) misclassification of polyp due to pseudo enhanced voxels; and 4) pseudo soft tissue structures. The objective of the study was to subtract the tagged colonic content without losing the soft tissue structures. This paper proposes a novel adaptive method to solve the first three problems using a multi-step algorithm. It uses a new edge model-based method which involves colon segmentation, priori information of Hounsfield units (HU) of different colonic contents at specific tube voltages, subtracting the tagging materials, restoring the soft tissue structures based on selective HU, removing boundary between air-contrast, and applying a filter to clean minute particles due to improperly tagged endoluminal fluids which appear as noise. The main finding of the study was submerged soft tissue structures were absolutely preserved and the pseudo enhanced intensities were corrected without any artifact. The method was implemented with multithreading for parallel processing in a high performance computer. The technique was applied on a fecal tagged dataset (30 patients) where the tagging agent was not completely removed from colon. The results were then qualitatively validated by radiologists for any image processing artifacts.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.251-261
• /
• 2003

To measure the GPS position accuracy and its distribution according to the length of the baseline, 30 minutes to 24 hours observations at the fixed location were conducted with two GPS receivers (Ll, 12 channels) on May 29 to June 2, 2002. The GPS data received at the reference station, the rover station and the ordinary times GPS observation station operated by the National Geography Institute in Korea were processed in kinematic and static post-processing methods with a post -processing software. The results obtained are summarized as follows: 1. The number of the satellite that could be observed continuously more than six hours was 16 and most of these satellites were positioned at east-west direction on May 31, 2002. The number of the satellite observed and the geometric dilution of precision (GDOP) determined by the average of every 10 minute for the day were 8 and 3.89, respectively. 2. Both the average GPS positions before and after post-processing were shifted (standalone: 1.17 m, post -processing: 0.43m) to the south and west. The twice distance root mean square (2drms) measured with standalone was 6.65m. The 2drms could be reduced to 33.8% (standard deviation 0=17.2) and 5.3% (0=2.2) of standalone by the kinematic and the static post-processing methods, respectively. 3. The relationship between the length of the baseline x (km) and the 2drms y (m) obtained by the static post-processing method was y=0.00l6x+0.006 $(R^2=0.87)$. In the case of the positioning with the static post-processing method using the GPS receiver, it was found that a positioning within 20cm 2drms was possible when the length of the baseline was less than 100km and the receiving time of the GPS is more than 30 minutes.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.286-286
• /
• 2017

We conducted to compare the characteristics of rice flours according to the different milling processes. Five rice varieties (Oryza sativa L.) with different amylose content were prepared by wet and dry milling processes. The moisture contents of wet-milled rice flours (WMR) was mostly three-time higher than those of dry-milled flours (DMR). Water absorption index (WAI), water solubility index (WSI) and swelling power (SP) increased in proportion to temperature ($50-90^{\circ}C$). WAI, WSI, SP of DMR showed higher value than those of WMR. Baeokchal (BOC) which is waxy rice cultivar was significantly high level of WSI. Pasting properties of DMR except BOC cultivar resulted in higher peak viscosity, trough viscosity, final viscosity and Setback. The levels of resistant starch in the four cultivars except Dodamssal (DDS) were under 1% irrespective of Milling processes, whereas the resistant starch contents of DMR and WMR in DDS was 9.18 and 6.27, respectively. Damaged starch content of WMR were less than those of DMR, moreover, negative correlation was observed between amylose content and damaged starch of rice cultivars. These results suggest that the properties of rice flour varied depending on the milling methods and varieties, and it could be a reference for selecting the appropriate processing purposes.