• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.82-87
• /
• 2003

Post-processing programs play an important role in the CFD data visualization and analysis. A variety of post-processing softwares have been developed and are being used in the CFD community. Developing a good quality of post-processing program requires dedication and efforts. In this paper an experience obtained through previous studies and developing post-processing programs are introduced which includes data structure and visualization algorithms.

• 대한전자공학회논문지SP
• /
• 제44권2호
• /
• pp.137-143
• /
• 2007

기존의 후처리 기법을 그대로 적용한 P-ECLMS(Post-Processing Expand Correlation LMS) 알고리즘은 동시통화환경에서 근단신호의 왜곡을 발생 시킨다. 이러한 문제를 해결해주기 위해 단일통화의 경우와 동시통화의 경우 후처리계수를 달리 하여 주는 SP-ECLMS(Selective Post-Processing ECLMS) 알고리즘을 제안한다. 상관도가 30% 이상 나을 때는 신호의 왜곡을 방지하기 위해 원래의 신호를 출력시키도록 하고 상관도가 그 이하일 경우는 후처리 값을 그대로 가중 값으로 적용하여 단일 통화 환경의 잔여반향을 줄여준다. 따라서 통화시간의 대부분인 단일통화환경에서의 잔여반향을 감소시키고 동시통화환경에서도 안정적 통신채널을 유지하도록 한다.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.210-218
• /
• 1999

Sheet deposition type rapid prototyping system have many advantages : high build speed, low operating cost, large part size, no phase change, no need for support generation, and forth. However, those sheet deposition type rapid prototyping system require an additional post processing to remove excessive material attached to the part. This post processing is time consuming and labor intensive. Moreover, it is difficult for those system to fabricate parts with hollow cores and internal cavities. A new sheet deposition type rapid prototyping system that minimizes the post processing is proposed. The proposed system automatically removes excessive material in a peeling-off process between two cutting processes. In this way, the proposed system can reduce the post-processing time and cost as well as the limitation of the feasible geometric shapes in the conventional sheet deposition system.

• 한국축산식품학회지
• /
• 제41권4호
• /
• pp.589-607
• /
• 2021

Meat proteolytic systems play a crucial role in meat tenderisation. Understanding the effects of processing technologies and post-mortem storage conditions on these systems is important due to their crucial role in determining the quality characteristics of meat and meat products. It has recently been proposed that tenderisation occurs due to the synergistic action of numerous endogenous proteolytic systems. There is strong evidence suggesting the importance of μ-calpain during the initial post-mortem aging phase, while m-calpain may have a role during long-term aging. The caspase proteolytic system is also a candidate for cell degradation in the initial stages of conversion of muscle to meat. The role of cathepsins, which are found in the lysosomes, in post-mortem aging is controversial. Lysosomes need to be ruptured, through aging, or other forms of processing to release cathepsins into the cytosol for participation in proteolysis. A combination of optimum storage conditions along with suitable processing may accelerate protease activity within meat, which can potentially lead to improved meat tenderness. Processing technologies such as high pressure, ultrasound, and shockwave processing have been reported to disrupt muscle structure, which can facilitate proteolysis and potentially enhance the aging process. This paper reviews the recent literature on the impacts of processing technologies along with post-mortem storage conditions on the activities of endogenous proteases in meat. The information provided in the review may be helpful in selecting optimum post-mortem meat storage and processing conditions to achieve improved muscle tenderness within shorter aging and cooking times.

• 자동차안전학회지
• /
• 제13권2호
• /
• pp.35-41
• /
• 2021

In this study, improved path tracking control algorithm based on pure pursuit algorithm is newly proposed by using improved lane detection algorithm through real time post-processing with interpolation methodology. Since the original pure pursuit works well only at speeds below 20 km/h, the look-ahead distance is implemented as a sigmoid function to work well at an average speed of 45 km/h to improve tracking performance. In addition, a smoothing filter was added to reduce the steering angle vibration of the original algorithm, and the stability of the steering angle was improved. The post-processing algorithm presented has implemented more robust lane recognition system using real-time pre/post processing method with deep learning and estimated interpolation. Real time processing is more cost-effective than the method using lots of computing resources and building abundant datasets for improving the performance of deep learning networks. Therefore, this paper also presents improved lane detection performance by using the final results with naive computer vision codes and pre/post processing. Firstly, the pre-processing was newly designed for real-time processing and robust recognition performance of augmentation. Secondly, the post-processing was designed to detect lanes by receiving the segmentation results based on the estimated interpolation in consideration of the properties of the continuous lanes. Consequently, experimental results by utilizing driving guidance line information from processing parts show that the improved lane detection algorithm is effective to minimize the lateral offset error in the diverse maneuvering roads.

• 전자공학회논문지C
• /
• 제34C권5호
• /
• pp.82-92
• /
• 1997

In this paper, we propose post-rpocessing method that corrects a misrecognized character by generated a characater recognizer using morphological analyzer and spelling corrector. The proposed post-processing consists of sthree phases : First, our method pass through morhological analyzer which only outputted necessary information for spelling correcting, doesn't analyze a bundle of phrases, and detects the location of misrecognized character. Second, tagging the generated candidate character using the information of character substitution table and grapheme substitution/separating table. Then we retry analysis after the misrecognition character has been substituted. Finally we select table, we investigate misrecognized charcters in CORPUS. Reliability analysis used to frequency of randomly selected about 100,000 words in CORPUS. A korean character recognizer demonstrates 93% correction rate without a post-processing. The entire recognition rate of our system with a post-processing exceeds 97% correction rate.

• 한국통신학회논문지
• /
• 제22권4호
• /
• pp.648-661
• /
• 1997

This paper presents a new method for post-processing of coded images based upon the low-pass filtering followed by the projection onto the NQCS (narrow quantization constraint set). We also investigate how the proposed method works on JPEG-coded real images. The starting point of the QCS-based post-processing techniques is the centroid of the QCS, where the original image belongs. The low-pass filtering followed by the projection onto the QCS makes the images lie on the boundary of the QCS. It is likely that, however, the original image is inside the QCS. Hence projection onto the NQCS gives a lower MSE (mean square error) than does the projection onto the QCS. Simulation results show that setting the narrowing coefficients of the NQCS to be 0.2 yields the best performance in most cases. Even though the JPEG-coded image is low-pass filtered and projected onto the NQCS repeatedly, there is no guarantee that the resultant image has a lower MSE and goes closer to the original image. Thus only one iteration is sufficient for the post-processing of the coded images. This is interesting because the main drawback of the iterative post-processing techniques is the heavy computational burden. The single iteration method reduces the computational burden and gives us an easy way to implement the real time VLSI post-processor.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.149-158
• /
• 2004

In most RP processes, the inherent stair-stepped surfaces and shrinkage-induced warping of the parts require post processing such as surface finishing. To minimize such defects, VLH-ST, a newly developed RP process, employs a 3.9-mm thick expandable polystyrene (EPS) foam sheet and a hot wire to contour it to have slant linear-interpolated sides. The use of relatively thick sheets for layers, however, limits the process capability of constructing fine details, especially smaller than the layer thickness. This study is focused on the development of a post processing method fo fine details of VLM-ST parts. The post-processing tool was designed to meet all the requirements for the desirable post processing. It adopted a hot wire as a means of melting the EPS foam sheet. Various basic experiments on the post processing were carried out to obtain the optimal process conditions. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the experiments. The effectiveness of the developed post-processing method fo forming or engraving fine details on the VLM-ST parts has been thus demonstrated. The experiments on engraving several sets of letters, such as CANESM, 인간, and 한국과학기술원, on the EPS foam sheet were carried out. In addition, a flowery shape was engraved on a three-dimensionally curved surface of a pottery-shape VLM-ST part.

• 대한기계학회논문집A
• /
• 제41권9호
• /
• pp.839-844
• /
• 2017

최근 3차원 프린팅 기술은 비약적으로 발전하여 쾌속조형기술의 대명사가 되고 있다. FDM 방식의 3D프린터는 쾌속조형에 사용되는 가장 일반적인 프린터이지만, 열에 취약하고, 출력물의 표면이 매끄럽지 못하는 등의 문제를 가지고 있다. 본 논문에서는 FDM방식의 3D프린터로 ABS재질의 시편을 제작하였고, 아세톤에 시편을 담그는 방식으로 후처리를 수행하였다. 공정시간을 변수로 후처리를 진행하였으며, 처음 5초의 후처리 시간동안에는 시편의 표면조도가 급격하게 개선되는 결과를 획득하였으며, 5초 이후에는 표면조도의 변화정도가 미미하였다. 또한, 이러한 후처리 공정은 적지만 시편의 인장강도와 파단변형률을 상승시키는 결과를 나타내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1111-1117
• /
• 2003

NURBS (Non Uniform Rational B-Spline) is widely used in CAD system and NC data for high speed machining. Conventional CAM system changes NURBS surface to tessellated meshes or Z-map model, and produces linear tool path. The linear tool path is not good for precise machining and high speed machining. In this paper, an algorithm to change linear tool path to NURBS one was studied, and the machining result of NURBS tool path was compared with that of linear tool path. The N-post, post-processing and virtual machining software was developed. The N-Post post-processes linear tool path to NURBS tool path and quickly shades machined product on OpenGL view and compares a machined product with original CAD surface. A virtual machined model of original tool path and post-processed tool path was compared to original CAD model. The machining error of post-processed NURBS tool path was reduced to 43%. The original tool path and NURBS tool path was used to machine general model using same machine tool and machining condition. The machining time of post-processed NURBS tool path was reduced up to 38%.