• 한국항공우주학회지
• /
• 제42권1호
• /
• pp.29-36
• /
• 2014

하이브리드 로켓 연소에서는 다양한 종류의 저주파수 연소 압력진동이 나타난다. 10Hz 대역의 저주파수 압력진동은 고체연료와 연소가스의 열 관성 차이 때문에 발생하지만 그외의 저주파수 진동은 고체로켓에서 관찰되는 헬름홀츠 및 $L^*$ 모드에 의해 발생하는 것으로 연소실 부피 변화와 밀접한 관련이 있다. 따라서 유동 특성이 고체로켓과 유사한 하이브리드 로켓 연소에서 연소실 부피 변화는 저주파수 특성에 영향을 미치는 중요한 인자이다. 본 연구에서는 연소실과 후연소실의 형상 변화에 따른 연소 압력의 저주파수 특성 변화를 관찰하였다. 특히 주 연소실과 후연소실의 부피 비가 특정한 값이 되면 연소 도중에 10~30Hz 연소 압력 진동의 진폭이 갑자기 증폭되는 연소불안정 현상이 나타났다. 산화제 유량 조절 및 연료 변경에 의한 O/F 비 변화는 연소 압력의 저주파수 증폭과 무관한 것으로 밝혀졌다. 후연소실로 연소가스가 팽창할 때 발생하는 와류 흘림 현상이 저주파수 불안정 현상과 직접적인 관련 있는 것으로 판단되며 이에 관한 연구가 더 필요하다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.133-138
• /
• 2002

A 3-D axisymmetric computer program is developed to predict the NO behavior in SNCR system for the stoker incinerator with the waste treatment capacity, 200ton/day. To this end a turbulent reacting flow field calculation is made using proper assumption and empiricism. The stoker bed is assumed to be a homogeneous waste-volatilized gaseous state. The initial composition or reactants are assumed based on the data of the ultimate analysis. Turbulent is resolved by k-e model and turbulent reaction is handled by eddy-breakup model harmonized with empirical chemistry data for gaseous combustion, NO and urea reaction. The liquid droplet is traced by Lagrangian method incorporated by aerodynamic drag, Coriolis and crntrifugal forces. Radiation is treated by sensible heat loss model. Calculation results are in good agreement with experimental data at the outlet of post combustion chamber in Daejon 4th industrial complex. The flue gas shows the temperature range of $900\sim1000^{\circ}C$, velocity of 5m/s and NO concentration of 140ppm at the exit while the measured temperature, flue gas velocity and NO concentration are $967^{\circ}C$, $3\sim4m/s$ and $100\sim200ppm$respectively. Using the developed computer program a parametric study has been made with the variation of heat content of waste, castable length and SNCR variables for the determination of proper injector location. In general, the calculated results are consistent and physically acceptable.

• 한국항공우주학회지
• /
• 제46권12호
• /
• pp.1021-1027
• /
• 2018

하이브리드 로켓에서 고주파수 대역의 압력진동(p')과 열 방출 진동(q')이 양의 결합이 저주파수 연소불안정 발생에 필수조건임을 검증하기 위한 실험연구를 수행하였다. 후연소실 길이와 연소 당량비를 변수로 설정하여 p' 진폭과 p', q'의 위상차를 조절하였으며 저주파수 연소불안정의 억제 여부를 판단하였다. 실험 결과에 의하면, 후연소실 길이가 증가하여도 p', q'의 위상차는 ${\pi}/2$ 이하로 연소불안정 발생조건을 유지하지만 p', q'의 결합강도인 RI(Rayleigh index)의 주기적 증폭이 약화되면서 연소불안정이 억제됐다. 또한 특정한 당량비에서 연소불안정이 발생하므로 순간 당량비를 변화시켜 p', q'의 결합을 음의 결합으로 천이시켜 연소 안정화가 이루어짐을 확인하였다. 따라서 고주파수 p', q'이 양의 결합과 RI의 주기적인 증폭으로 연결될 때 저주파수 연소불안정이 나타나는 발생 메커니즘의 중간 경로도 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제30권1호
• /
• pp.16-21
• /
• 2005

본 실험에서는 근관 충전 후 Streptococcus mutans를 이용하여 포스트 와동 형성 전후의 근관부미세 누출을 비교하였다. 40개의 발치된 치아를 치근단의 길이가 14 mm가 되도록 치관부를 제거한 뒤, 06 taper $Profile^{(R)}$로 MAF 크기가 $\#40$이 되게 근관 확대를 시행하였다. 근관 확대 후 continuous wave technique으로 근관 충전을 시행하였다. 실험군은 다음과 같다. 1군은 양성 대조군으로 sealer 없이 근관 충전 하였다. 2군은 음성 대조군으로 sticky wax로 치근면을 완전히 막았다. 3군은 근관 충전 후 전체 길이를 14 mm로 유지하였다. 4군은 근관 충전 후 거타퍼치를 5 mm 길이로 남겨두고 포스트 와동을 형성하였다. 치근을 플라스틱 튜브 안에 위치시켜 치근첨은 Andrade's indicator가 첨가되어 있는 BHI 배지에 접촉되도록 하고 상부에서는 bacteria가 유입되도록 하였다. 실험군 3에서의 색변화는 평균 27.2일 만에 일어났으며 포스트 와동 형성한 4군은 평균 15.7일만에 색변화가 일어났으며 3군과 4군 사이에 통계학적으로 유의차를 나타내었다(P = 0.0007).

• Archives of Plastic Surgery
• /
• 제37권2호
• /
• pp.105-109
• /
• 2010

Purpose: The purpose of this study is to determine the effect of platelet-rich plasma (PRP) on rat sciatic nerve regeneration in a 10 mm silicone chamber. Methods: A total of 6 inbred Lewis rats were used in this study. Bilateral sciatic neurectomy was performed on each rat. On one side, silicone chambers containing PRP solutions were implanted; on the contralateral side, the chambers without PRP were implanted as a control. In 12 weeks post-implantation, chambers were retrieved and both gastrocnemius muscles were excised. Nerves biopsy samples were examined under a light microscope after Masson trichrome staining. Results: Cross sections of the midpoints of PRP treated nerves were significantly larger and appeared more mature than those of controls. Conclusion: Based on morphological evidence, PRP has a positive effect on neural regeneration, and it may therefore be useful for treating peripheral nerve injuries.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.46-52
• /
• 2008

The restrictor, which is a fluid channel from a reservoir to a chamber inside a thermal micro actuator, has been fabricated using ArF and KrF excimer lasers, Diode-Pumped Solid State Lasers (DPSSL) and femtosecond lasers for a feasibility study. A numerical model of fluid dynamics for the actuator chamber and restrictor is presented. The model includes bubble formation and growth, droplet ejection through nozzle, and dynamics of fluid refill through the restrictor from a reservoir. Since an optimized and well-fabricated restrictor is important for a high frequency actuator, some special beam delivery setups and post processing techniques have been researched and developed. The effects of variations of the restrictor length, diameter, and tapered shapes are simulated and the results are analyzed to determine the optimal design. The numerical results of droplet velocity and volume are compared with the experimental results of a cylindrical-shaped actuator. It is found that the micro actuators having tapered restrictors show better high frequency characteristics than those having a cylindrical shape without any notable decrease of droplet volume. The laser-fabricated restrictors demonstrate initial feasibility for the laser direct ablation technique although more development is required.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.21-23
• /
• 1999

In this paper, the analysis of the electric field in the chamber of high voltage $SF_6$ GCB(Gas Circuit Breaker) is presented by using C-1 FEM. For this purpose, pre-processing program and post-processing program were developed for axisymmetirc 3 dimensional analysis and the electric field in cylindric chamber was analyzed. Important problem is that electric analysis must be considered coronal due to break-down of $SF_6$ when it is cutted off. To solve this problem, a procedure is needed to verify that the solution of Poisson's equation for scalar potential satisfy charge continuos condition because of using first order element os not satisfy the electric continuous condition, C-1 FEM is introduce to obtain electirc potential and electric field at the same time. Analysis of the distribution of electric field on model was done. It is confirmed that the developed program in this paper applicable to design and to analyze of characteristics in total program as electric characteristics analysis routine.

• Applied Microscopy
• /
• 제50권
• /
• pp.24.1-24.11
• /
• 2020

The development of the femtosecond laser (fs laser) with its ability to provide extremely rapid athermal ablation of materials has initiated a renaissance in materials science. Sample milling rates for the fs laser are orders of magnitude greater than that of traditional focused ion beam (FIB) sources currently used. In combination with minimal surface post-processing requirements, this technology is proving to be a game changer for materials research. The development of a femtosecond laser attached to a focused ion beam scanning electron microscope (LaserFIB) enables numerous new capabilities, including access to deeply buried structures as well as the production of extremely large trenches, cross sections, pillars and TEM H-bars, all while preserving microstructure and avoiding or reducing FIB polishing. Several high impact applications are now possible due to this technology in the fields of crystallography, electronics, mechanical engineering, battery research and materials sample preparation. This review article summarizes the current opportunities for this new technology focusing on the materials science megatrends of engineering materials, energy materials and electronics.

• 한국안광학회지
• /
• 제15권3호
• /
• pp.275-280
• /
• 2010

목적: 의료기술의 급속한 발전으로 노인 인구가 급증하고 있는 가운데 90세 이상의 초고령 환자들의 백내장 수술 전 후 안 수치와 시력에 관한 임상상태를 알아보고자 하였다. 방법: 2007년 3월부터 2009년 2월까지 경기도 안성소재에 위치한 안과의원에서 백내장 시행 수술을 받은 90세 이상의 환자 48명, 82안을 대상으로 수술 전 후의 최대교정시력, 안축장, 전방깊이 및 동반된 안질환 등을 조사하였다. 결과: 안축장 길이는 변하지 않았으나 전방의 깊이는 연령의 증가에 따라 수정체 두께의 증가로 점차 감소하는 양상을 보였고, 남성이 여성보다 큰 경향을 보였다. 82안 중 71안 (86.6%)에서 수술 전에 비하여 교정시력의 향상을 보였으며, 43안(52.4%)은 0.5이상의 시력을 볼 수 있었다. 결론: 전신질환 및 동반된 안질환을 가진 사람은 건강한 동 연령대의 정상인에 비하여 백내장 수술 후 0.5이하의 저 시력을 나타내었으나 그 외는 0.5이상의 교정시력을 나타내어 90대의 연령에서도 백내장 수술은 필요하다고 할 수 있으며, 백내장 수술은 안질환 유 무가 교정시력에 큰 영향을 미친다고 할 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.549-567
• /
• 1994

Restoration of severly damaged teeth after endodontic treatment had been an interest to many dentists, and it is a fact that there have been lots of studies about it. In these days, although we have used Para-Post, pins, threaded steel post, cast gold post and core, and so on, as a method of restoration frequently, it has been in controversy with the influence of them on the teeth and surrounding periodontal tissue. In this study, we assume that the crown of the upper incisor have severly damaged, so, after the root canal therapy, 4 types of restoration had been carried out; 1) coronal-radicular amalgam restoration, 2) after setting up the Para-Post, restore with composite resin core only, 3) after setting up the Para-Post; restore with amalgam core, then cover with the PPM crown 4) after setting up the Para-Post, restore with composite core, then cover with the PPM crown. After restoration, in order to observe the concentration of stress at internal portion of the teeth and the sourrounding periodontal tissue, developing a 2-dimensional finite element model of labiopalatal section, then loading forces from 3 direction - direction of 45 degrees from lingual side near the incisal edge, horizontal direction from labial height of contour, vertical direction at the incisal edge-were applied. The analyzed results were as follows: 1. Stress of the normal central incisor was concentrated on the dentin aroundpulp chamber, labiocervical portion of a tooth and root apex, but with the alveolar bone, in the case of load from the direction of 45 degrees from lingual side near the incisal edge showed remarkable concentration of stress: 2. Coronal-radicular amalgam technique -showed less concentration of stress on the root and surrounding periodontal tissue than the restoration with the Para-Post. 3. The von Mises equivalent stress on the Para-Post showed maximum value at root-core junction rather than both ends and model with PPM restoration with amalgam core showed the least concentration of stress. Only the force from horizontal direction showed large shear stress on internal portion of the root, root apex and alveolar bone. 4. PPM crown with composite core rarely showed the concentration of stress on root and periodontal tissue. 5. As for alveolar bone, remarkable shear stress was concentrated on labial and palatal side by horizontal load.