• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.221-224
• /
• 2007

It is reported that the orthognathic patients suffer from not only aesthetic problems but also resonance disorder and articulation disorder because of the abnormality of the oral cavity. These disorders have an influence on the patients' communication and they are usually required to be corrected by orthognathic surgery. Speech of the orthognatic patients is affected by the change of the oral cavity capacity and structures after surgery. This study was designed to investigate the resonance of nasality and the intelligibility of speech for acoustic characteristics of speech for pre and post orthognatic surgery patients.

• Structural Engineering and Mechanics
• /
• v.29 no.6
• /
• pp.623-642
• /
• 2008

While spatial plastic mechanism analysis has been widely and successfully applied to thinwalled steel structures to analyse the post-failure behaviour of sections and connections, there remains some contention in the literature as to the basic capacity of an inclined yield line. The simple inclined hinge commonly forms as part of the more complex spatial mechanism, which may involve a number of hinges perpendicular or inclined to the direction of thrust. In this paper some of the existing theories are compared with single inclined yield lines that form in flange outstands, by comparing the theories with plate tests of plates simply supported on three sides with the remaining (longitudinal) edge free. The existing mechanism theories do not account for different in-plane displacement gradients of the loaded edge, nor the slenderness of the plates, and produce conservative results. A modified theory is presented whereby uniform and non-uniform in-plane displacements of the loaded edge of the flange, and the slenderness of the flange, are accounted for. The modified theory is shown to compare well with the plate test data, and its application to flanges that are components of sections in compression and/or bending is presented.

• Steel and Composite Structures
• /
• v.29 no.2
• /
• pp.161-173
• /
• 2018

Point bending is often used for cambering and curving structural steel girders. An analytical solution, applicable in the elasto-plastic range only, that relates applied loads to the desired curve was recently developed for inducing horizontal curves using four-point bending. This solution does not account for initial residual stresses and geometric imperfections built-in hot-rolled sections. This paper presents results from a full-scale test on a hot-rolled steel section curved using four-point bending. In parallel, a numerical analysis, accounting for both initial geometric imperfections and initial residual stresses, was carried out. The models were validated against the experimental results and a good agreement for lateral offset and for strain in the elasto-plastic and post-plastic ranges was achieved. The results show that the effect of initial residual stresses on deformation and strain is minimal. Finally, residual stresses due to cold bending calculated from the numerical analysis were assessed and a revised stress value for the service load design of the curved girder is proposed.

• The Korean Journal of Cytopathology
• /
• v.6 no.2
• /
• pp.214-218
• /
• 1995

Cytopathologic findings of two cases of adenoid cystic carcinoma of the trachea are reported. The carcinomas grew as an intratracheal mass. By bronchial washing, brushing and/or post-bronchoscopic sputum cytology, large cohesive sheets, lobulated clusters, or three dimensional ball-like structures were obtained. They had numerous cyst-like spaces containing characteristic globular basophilic material. The tumor cells were uniform and had a small amount of cytoplasm. Nuclei were small and hyperchromatic, Nucleoli were occasionally observed. The cytological diagnosis was confirmed by bronchoscopic biopsies. Since the cytomorphology of adenoid cystic carcinoma is characteristic, review of these cytologic features will enhance the diagnostic accuracy in exfoliative cytology of the respiratory tract.

• Natural Product Sciences
• /
• v.7 no.3
• /
• pp.83-86
• /
• 2001

Two new bisbenzylisoquinoline alkaloids tiliacosine (1) and tiliasine (2) were isolated from the leaves of Tiliacora racemosa Colebr.. The structures of these alkaloids were established on the basis of spectral evidence and by the correlation of their $^1H-NMR$ spectral data with those of the congeners N-methyltiliamosine (3), tiliamosine (4) and tiliacorine (5).

• International Journal of Concrete Structures and Materials
• /
• v.8 no.3
• /
• pp.251-258
• /
• 2014

The use of sustainable technologies such as supplementary cementitious materials, and/or recycled post-consumer environmental wastes is widely used in concrete industry in the last decade. This paper presents the results of a laboratory investigation of normal concrete containing sustainable technologies. Twenty one mixtures (21) were prepared with different combinations of silica fume, fly ash, olive's seed ash, and corncob ash (CCA). Fresh and hardened concrete properties were measured, as expected the inclusion of the sustainable technologies affected both fresh and hardened concrete properties. Based on the results obtained in this study and the analyses conducted, the following observations were drawn: replacing the cement by olive's seed ash or CCA has a significant effect on fresh concrete workability. Olive's seed ash increased the slump by more than 200 % compared to the control mixtures. The compressive strength of mixtures containing olive's seed ash showed by 45 and 75 % decrease compared to the control mixtures. The 28 days compressive strength of mixtures produced by CCA of 10 % replacement decreased by 41 % compared to the control mixture.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2232-2235
• /
• 2003

In speech communication systems where two different speech codecs are interoperated, transcoding algorithm is a good approach because of its low complexity and improved synthesized speech quality. This paper proposes an efficient method to further improve the performance of transcoding algorithms as well as to reduce the complexity. In the conventional transcoding algorithms. a post-filter and a perceptual weighting filter should be operated sequentially because both decoding and encoding processes are needed. This results in the redundancy of the processing in terms of complexity and perceptual quality. Using the fact that their filter structures are similar, we replaced the two filters with one. The proposed algorithm requires 72.8% lower complexity than the conventional transcoding algorithm when we compare only the complexity of the filtering processes. The results of both objective and subjective tests verify that the proposed algorithm has slightly better quality than the conventional one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.43-44
• /
• 2005

SU-8 is a epoxy based photoresist designed for MEMS applications, where a thick, chemically and thermally stable image is desired. But SU-8 has proven to be very sensitive to variation in processing variables and hence difficult to use in the fabrication of useful structures. In this paper, negative SU-8 photoresist processed has been characterized in terms of delamination. Based on a full factorial designed experiment. Employing the design of experiment (DOE), a process parameter is established, and analyzing of full factional design is generated to investigate degree of delamination associated with three process parameters: post exposure bake (PEB) temperature, PEB time, and exposure energy. These results identify acceptable ranges of the three process variables to avoid delamination of SU-8 film, which in turn might lead to potential defects in MEMS device fabrication.

• Journal of Chest Surgery
• /
• v.22 no.6
• /
• pp.1061-1069
• /
• 1989

A case of liposarcoma was reported in 52 year-old female. She had the operation history due to mediastinal lipoma at other Hospital before 26 months ago. Chest X-ray revealed a huge soft tissue mass- density at the entire right lung field, and left middle and lower lung field at admission. At the lateral film, the mass was located in the anterior and middle mediastinum. Transsternal bilateral thoracotomy was performed, followed by extirpation of liposarcoma, wedge resection of superior vena cava, angioplasty of superior vena cava, and then partial pericardiectomy. The post-operative treatment was 5500 rad irradiation. Post-operative course was uneventful, that was noticed by OPD follow-up for 10 months. Primary liposarcoma of the mediastinum is very rare tumor. This tumor grows to an enormous size, and symptoms are referable to compression of the contiguous intrathoracic structures. The treatment of choice is surgery in all cases. Such an approach serves to establish a tissue diagnosis, to relieve the patients* symptoms, and may results in a cure sometimes. Radiotherapy or/and chemotherapy seems to be ineffective, but should be further studied.

• Journal of information and communication convergence engineering
• /
• v.3 no.4
• /
• pp.191-194
• /
• 2005

SU-8 is a epoxy based photoresist designed for MEMS applications, where a thick, chemically and thermally stable image are desired. However SU-8 has proven to be very sensitive to variation in processing variables and hence difficult to use in the fabrication of useful structures. In this paper, negative SU-8 photoresist processed has been characterized in terms of delamination, based on a full factorial designed experiment. Employing the design of experiment (DOE), a process parameter is established, and analyzing of full factorial design is generated to investigate degree of delamination associated with three process parameters: post exposure bake (PEB) temperature, PEB time, and exposure energy. These results identify acceptable ranges of the three process variables to avoid delamination of SU-8 film, which in turn might lead to potential defects in MEMS device fabrication.