• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1199-1203
• /
• 2012

Catalytic filters consisting of Ni nanoparticle and carbon fiber with different oxidation states of Ni (either metallic or oxidic) were prepared using a chemical vapor deposition process and various post-annealing steps. CO oxidation reactivity of each sample was evaluated using a batch type quartz reactor with a gas mixture of CO (500 mtorr) and $O_2$ (3 torr) at $300^{\circ}C$. Metallic and oxidic Ni showed almost the same CO oxidation reactivity. Moreover, the CO oxidation reactivity of metallic sample remained unchanged in the subsequently performed second reaction experiment. We suggested that metallic Ni transformed into oxidic state at the initial stage of the exposure to the reactant gas mixture, and Ni-oxide was catalytically active species. In addition, we found that CO oxidation reactivity of Ni-oxide surface was enhanced by increase in the $H_2O$ impurity in the reactor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.101-105
• /
• 2024

4H-SiC power metal-oxide-semiconductor field effect transistors (MOSFETs) have been developed to achieve lower specific-on-resistance (R_on,sp), and the gate oxides have been thermally grown. The poor channel mobility resulting from the high interface trap density (D_it) at the SiO₂/4H-SiC interface significantly affects the higher switching loss of the power device. Therefore, the development of novel fabrication processes to enhance the quality of the SiO₂/4H-SiC interface is required. In this paper, NO post-oxidation annealing (POA) by using the conditions of N₂ diluted NO at a high temperature (1,300℃) is proposed to reduce the high interface trap density resulting from thermal oxidation. The NO POA is carried out in various NO ambient (0, 10, 50, and 100% NO mixed with 100, 90, 50, and 0% of high purity N₂ gas to achieve the optimized condition while maintaining a high temperature (1,300℃). To confirm the optimized condition of the NO POA, measuring capacitance-voltage (C-V) and current-voltage (I-V), and time-of-flight secondary-ion mass spectrometry (ToF-SIMS) are employed. It is confirmed that the POA condition of 50% NO at 1,300℃ facilitates the equilibrium state of both the oxidation and nitridation at the SiO₂/4H-SiC interface, thereby reducing the D_it.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1149-1155
• /
• 2004

In this paper, novel methods for improvement of thermal stability of Ni-germano Silicide were proposed for nano CMOS applications. It was shown that there happened agglomeration and abnormal oxidation in case of Ni-germano Silicide using Ni only structure. Therefore, 4 kinds of tri-layer structure, such as, Ti/Ni/TiN, Ni/Ti/TiN, Co/Ni/TiN and Ni/Co/TiN were proposed utilizing Co and Ti interlayer to improve thermal stability of Ni-germano Silicide. Ti/Ni/TiN structure showed the best improvement of thermal stability and suppression of abnormal oxidation although all kinds of structures showed improvement of sheet resistance. That is, Ti/Ni/TiN structure showed only 11 ohm/sq. in spite of 600 $^{\circ}C$, 30 min post silicidation annealing while Ni-only structure show 42 ohm/sq. Therefore, Ti/Ni/TiN structure is highly promising for nano-scale CMOS technology.

• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.191-199
• /
• 2022

In industrial production, the development of traditional polyamide nanofiltration (NF) membrane was limited due to its poor oxidation resistance, complex preparation process and high cost. In this study, a composite NF membrane with high flux, high separation performance, high oxidation resistance and simple process preparation was prepared by the method of dilute solution dip coating. And the sulfonated polysulfone was used for dip coating. The results indicated that the concentration of glycerin, the pore size of the based membrane, the composition of the coating solution, and the post-treatment process had important effects on the structure and performance of the composite NF membrane. The composite NF membrane prepared without glycerol protecting based membrane had a low flux, when the concentration of glycerin increased from 5% to 15%, the pure water flux of the composite NF membrane increased from 46.4 LMH to 108.2 LMH, and the salt rejection rate did not change much. By optimizing the coating system, the rejection rate of Na₂SO₄ and PEG1000 was higher than 90%, the pure water flux was higher than 40 LMH (60psi), and it can withstand 20,000 ppm.h NaClO solution cleaning. When the post treatment processes was adjusted, the salt rejection rate of NaCl solution (250 ppm) reached 45.5%, and the flux reached 62.2 LMH.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.300-300
• /
• 2013

세계전자제품의 부품산업은 21세기 정보화 사회와 함께 IT 산업에서 급성장으로 인해 부품의 소형화, 경량화, 친환경화가 요구되고 있다. IT 산업에서 리드스크류(Leadsrew)는 마이크로 구동부품중의 이송장치를 구성하는 핵심 부품으로 탄소강과 합금강 및 스테인레스강 등이 사용되고 있다. 탄소강은 성형 가공성과 원가 절감에 최적의 소재로서 낮은 표면 경도로 인한 내마모성 저하와 부식 분위기에서의 내식성이 떨어지는 단점을 가지고 있다. 본 연구에서는 탄소강(S20C:${\oint}30{\times}h10$)을 이용하여 플라즈마 질화 표면처리를 통해 표면경도와 내마모성 향상 및 내식성을 높이는 연구를 수행하였다. 연구 방법으로 플라즈마 연질화 공정과 Post Oxidation 공정을 개발하였고, 질화 처리된 시험편에 대해 마이크로 비커스 경도, OEM&SEM, XRD 분석 및 염수분무(KS D 9502) 시험으로 특성을 분석하였다. 연구 결과로 탄소강(S20C)은 마이크로 비커스 경도 분석으로 표면 경도가 600Hv0.025 이상과 염수분무 시험으로 내식성은 24시간 이상의 결과를 얻었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.10a
• /
• pp.35-35
• /
• 2006

• Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.159-164
• /
• 2013

The mouse bioassay and high performance liquid chromatography (HPLC) post-column oxidation method are different methods of quantifying paralytic shellfish poisoning toxins. In this study, we compared their ability to accurately quantify the toxicity levels in two types of field sample (oysters and mussels) with different toxin profiles for routine regulatory monitoring. A total of 72 samples were analyzed by both methods, 44 of which gave negative results, with readings under the limit of detection of the mouse bioassay ($40{\mu}g/100g$ saxitoxin [STX] eq). In 14 oysters, the major toxin components were gonyautoxin (GTX) 1, -2, -3, -4, -5, decarbamoylgonyautoxin-2 (dcGTX2), and decarbamoylsaxitoxin (dcSTX), while 14 mussels tested positive for dcSTX, GTX2, -3, -4, -5, dcGTX2, neosaxitoxin (NEO), STX, and dcSTX. When the results obtained by both methods were compared in two matrices, a better correlation ($r^2=0.9478$) was obtained for mussels than for oysters ($r^2=0.8244$). Additional studies are therefore needed in oysters to investigate the differences in the results obtained by both methods. Importantly, some samples with toxin levels around the legal limit gave inconsistent results using HPLC-based techniques, which could have a strong economic impact due to enforced harvest area closure. It should therefore be determined if all paralytic shellfish poisoning toxins can be quantified accurately by HPLC, and if the uncertainties of the method lead to doubts regarding regulatory limits.

• Nutritional Sciences
• /
• v.9 no.4
• /
• pp.288-294
• /
• 2006

In this study, the effects of smoking cessation and relative antioxidant activities on the oxidative stress were determined by using in vitro method. Thirty healthy smokers who were free of any disease and smoked more than 1 pack per day for the past 10 years participated in this study. For smoking cessation, smokers were asked to wear nicotine patch (21mg nicotine/ patch) everyday for 30 days and then to replace at the same time of the day. Smoking cessation program in conjunction with nicotine patch replacement was also conducted every week, one hour/each session, for 4 weeks. Canthaxanthin, $\beta-carotene$, and $\alpha-tocopherol$ were added into red blood cells at pre and post smoking cessation. As indicators of oxidative stress, hemoglobin degradation, lipid peroxidation, and percent hemolysis were determined at both pre and post smoking cessation. After 30 days of smoking cessation, the subjects gained an average of 5 pounds, varying 2 to 8 pounds, by suggesting that behavioral problems rather than nicotine itself are more important for gaining weight in ex-smokers. The total hemoglobin concentrations in blood were similar in pre and post smoking cessation, but smoking cessation resulted in a decrease in the percentage of methemoglobin from 0.96% to 0.85% Smoking cessation also caused to decease malondialdehyde (MDA) values ($26.7{\pm}7.8$ vs. $23.6{\pm}4.5$ (without oxidation), $179.3{\pm}21$ vs. $161.2{\pm}28$ nmol/ml (with oxidation) (p<0.05)), not percent hemolysis. Various antioxidants with smoking cessation significantly decreased MDA values(p<0.05), in contrast to marginal decrease of MDA in smoking cessation only. Three antioxidants used in this stu study were similarly effective in inhibiting MDA production, but relative effectiveness of canthaxanthin or $\alpha-tocopherol$ was greater than that of $\beta-carotene$ (p<0.05), in case of oxidation induced. The percent hemolysis was greatly decreased when antioxidants were added into the blood of ex-smokers (p<0.05) but no statistical significance in relative effectiveness of antioxidants was observed.

• Journal of Korean Society on Water Environment
• /
• v.20 no.2
• /
• pp.110-119
• /
• 2004

The combination of biological and physical/chemical technologies is a promising technique to reduce highly concentrated pollutants in livestock wastewater. It is suggested to treat livestock wastewater efficiently as follows: firstly, biodegradable organic matters, nitrogen and some of phosphorus should be removed by a biological treatment process and then residual non-biodegradable organic matters, color and phosphorus be eliminated by physicochemical technologies. In this study, therefore, the integrations of chemical coagulation, activated carbon adsorption, Fenton oxidation and ozonation were evaluated to provide appropriate post-treatment processes for biologically pre-treated livestock wastewater. After chemical coagulation followed by ozonation or Fenton oxidation process, the quality of treated wastewater could meet the discharge limit in Korea. However, a yellowish brown color still remained in the treated wastewater after a single method such as coagulation and Fenton oxidation was applied. The ozonation was found to be the most effective technology for the decolorization. Neither simple biological nor physicochemical treatment provides adequate decolorization and sufficient depletion of organics in livestock wastewater so far. Consequently, the integration of Fenton oxidation and ozonation with a biological treatment process is recommended to treat livestock wastewater in terms of removal efficiency.

• Korean Journal of Materials Research
• /
• v.25 no.5
• /
• pp.215-220
• /
• 2015

The effect of Al content on the processing of reaction-bonded $Al_2O_3$ (RBAO) ceramics using 40v/o ~ 80v/o Al-Zn-Mg alloy powder was studied in order to improve traditional RBAO ceramic processes that use ~ 40v/o pure Al powder. The influence of high Al content in starting $Al_2O_3$-Al alloy powder mixtures on its particulate characteristics, reaction-bonding, microstructure, physical and mechanical properties was revealed. Starting $Al_2O_3$-Al alloy powder mixtures with 40v/o ~ 80v/o Al alloy powder were milled, reaction-bonded, post-sintered, and characterized. With an increasing Al alloy content, the milling efficiency of Al alloy powder was lowered, resulting in a larger particle size after milling. However, in spite of the larger particle size of Al alloy powder, the oxidation, i.e., reaction-bonding, of the Al alloy was successfully completed via solid and liquid state oxidation, in which the activation energy of the oxidation was nearly the same regardless of Al alloy content. After reaction-bonding and post-sintering at $1600^{\circ}C$, RBAO ceramics from 80v/o Al alloy content showed a relative density of ~97% and a flexural strength of 251 MPa compared to ~ 96% and 353 MPa for RBAO ceramics from 40v/o Al alloy content, respectively. The lower flexural strength at 80v/o Al alloy content was due to the weak spinel phase that formed from Zn, Mg alloying elements in Al.