• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.385-396
• /
• 2007

The aims of this study were to compare the shaping effect and safety between single length technique recommended by manufacturer and crown-down technique using Mtwo rotary file and to present a modified method in use of Mtwo file. Sixty simulated root canal resin blocks were used. The canals were divided into three groups according to instrument and the manner of using methods. Each group had 20 specimens. Group MT was instrumented with single length technique of Mtwo, group MC was instrumented with crown-down technique of Mtwo and group PT was instrumented with crown-down technique of ProTaper. All of the rotary files used in this study were operated by an electric motor. The scanned canal images of before and after preparation were superimposed. These superimposed images were evaluated at apical 1 to 8 mm levels Angle changes were calculated. The preparation time, weight loss, instrument failure and binding, canal aberrations, and centering ratio were measured. Statistical analysis of the three experimental groups was performed with ANOVA and Duncan's multiple range tests for post-hoc comparison and Fisher's exact test was done for the frequency comparison. In total preparation time, group MT and group MC were less than group PT. In the aberrations, group MT had more elbows than those of group MC and group PT. The binding of group MC was least and group MT was less than group PT (P < 0.05). Under the condition of this study, crown-down technique using Mtwo rotary file is better and safer method than single length technique recommended by the manufacturer.

• Asia pacific journal of information systems
• /
• v.23 no.2
• /
• pp.1-20
• /
• 2013

Social commerce has been gaining explosive popularity, with typical examples of the model such as Groupon and Level Up. Both local business owners and consumers can benefit from this new e-commerce model. Local business owners have a chance to access potential customers and promote their products in a way that could not have otherwise been easily possible, and consumers can enjoy discounted offerings. However, questions have been increasingly raised about the value and future of the social commerce model. A recent survey shows that about a third of 324 business owners who ran a daily-deal promotion in Groupon went behind. Furthermore, more than half of the surveyed merchants did not express enthusiasm about running the promotion again. The same goes for the case in Korea, where more than half of the surveyed clients reported no significant change or even decrease in profits compared to before the use of social commerce model. Why do local business owners fail to exploit the benefits from the promotions and advertisements through the social commerce model and to make profits? Without answering this question, the model would fall under suspicion and even its sustainability might be challenged. This study aims to look into problems in the current social commerce transactions and provide implications for the social commerce model, so that the model would get a foothold for next growth. Drawing on justice theory, this study develops theoretical arguments for the effects of transaction characteristics on consumers' distributive justice and purchase intention in the social commerce. Specifically, this study focuses on two characteristics of social commerce transactions-the discount rate and the purchase rate of products-and investigates their effects on consumers' perception of distributive justice for discounted transactions in the social commerce and their perception of distributive justice for regular-priced transactions. This study also examines the relationship between distributive justice and purchase intention. We conducted an online experiment and gathered data from 115 participants to test the hypotheses. Each participant was randomly assigned to one of nine manipulated scenarios of social commerce transactions, which were generated based on the combination of three levels of purchase rate (high, medium, and low) and three levels of discount rate (high, medium, and low). We conducted MANOVA and post-hoc ANOVA to test hypotheses about the relationships between the transaction characteristics (purchase rate and discount rate) and distributive justice for each of the discounted transaction and the regular-priced transaction. We also employed a PLS analysis to test relations between distributive justice and purchase intentions. Analysis results show that a higher discount rate increases distributive justice for the discounted transaction but decreases distributive justice for the regular-priced transaction. This, coupled with the result that distributive justice for each type of transaction has a positive effect on the corresponding purchase intention, implies that a large discount in the social commerce may be helpful for attracting consumers, but harmful to the business after the promotion. However, further examination reveals curvilinear effects of the discount rate on both types of distributive justice. Specifically, we find distributive justice for the discounted transaction increases concavely as the discount rate increases while distributive justice for the regular-priced transaction decreases concavely with the dscount rate. This implies that there exists an appropriate discount rate which could promote the discounted transaction while not hurting future business of regular-priced transactions. Next, the purchase rate is found to be a critical factor that facilitates the regular-priced transaction. It has a convexly positive influence on distributive justice for the transaction. Therefore, an increase of the rate beyond some threshold would lead to a substantial level of distributive justice for the regular-priced transaction, threrby boosting future transactions. This implies that social commerce firms and sellers should employ various non-price stimuli to promote the purchase rate. Finally, we find no significant relationship between the purchase rate and distributive justice for the discounted transaction. Based on the above results, we provide several implications with future research directions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.211-218
• /
• 2019

Purpose: The purpose of the present study was to compare the accuracy of four different metal copings fabricated by CAD/CAM technology and to evaluate clinical effectiveness. Materials and methods: Composite resin tooth of the maxillary central incisor was prepared for a metal ceramic crown and duplicated metal die was fabricated. Then scan the metal die for 12 times to obtain STL files using a confocal microscopy type oral scanner. Metal copings with a thickness of 0.5 mm and a cement space of $50{\mu}m$ were designed on a CAD program. The Co-Cr metal copings were fabricated by the following four methods: Wax pattern milling & Casting (WM), Resin pattern 3D Printing & casting (RP), Milling & Sintering (MS), Selective laser melting (SLM). Silicone replica technique was used to measure marginal and internal discrepancies. The data was statistically analyzed with One-way analysis of variance and appropriate post hoc test (Scheffe test) (${\alpha}=.05$). Results: Mean marginal discrepancy was significantly smaller in the Group WM ($27.66{\pm}9.85{\mu}m$) and Group MS ($28.88{\pm}10.13{\mu}m$) than in the Group RP ($38.09{\pm}11.14{\mu}m$). Mean cervical discrepancy was significantly smaller in the Group MS than in the Group RP. Mean axial discrepancy was significantly smaller in the Group WM and Group MS then in the Group RP and Group SLM. Mean incisal discrepancies was significantly smaller in the Group RP than in all other groups. Conclusion: The marginal and axial discrepancies of the Co-Cr coping fabricated by the Wax pattern milling and Milling/Sintering method were better than those of the other groups. The marginal, cervical and axial fit of Co-Cr copings in all groups are within a clinically acceptable range.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.95-101
• /
• 2019

Purpose: The aim of this study is to evaluate the effects of various primers on the microtensile bond strength (${\mu}TBS$) of resin cements to cobalt-chromium (Co-Cr) dental casting alloy. Materials and methods: Four adhesive primers (Universal primer, Metal primer II, Alloy primer, and Metal/Zirconia primer) and two resin cements (Panavia F2.0, G-CEM LinkAce) were tested. One hundred fifty Co-Cr beams were prepared from Co-Cr ingots via casting ($6mm\;ength{\times}1mm\;width{\times}1mm\;thick$). The metal beams were randomly divided into ten groups according to the adhesive primers and resin cements used; the no-primer groups served as the control (n = 15). After sandblasting with aluminum oxide ($125{\mu}m$ grain), the metal and resin cements were bonded together using a silicone mold. Prior to testing, all metal-resin beams were examined under stereomicroscope, and subjected to the ${\mu}TBS$ test. The mean value of each group was analyzed via one-way ANOVA with Tukey's test as post hoc (${\alpha}=.05$) using SPSS software. Results: The mean ${\mu}TBS$ of all groups was ranged from 20 to 28 MPa. There is no statistically significant difference between groups (P > .05). Mixed failure, which is the combination of adhesive and cohesive failures, is the most prevalent failure mode in both the Panavia F2.0 and G-Cem LinkAce groups. Conclusion: The ${\mu}TBS$ of all tested groups are relatively high; however, the primers used in this study result in no favorable effect in the ${\mu}TBS$ of Panavia F2.0 and G-Cem LinkAce resin cement to Co-Cr alloy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.153-163
• /
• 2021

Purpose: The aim of this study was to evaluate the effects of four surface treatment methods to improve zirconia roughness and three types of resin cement on the shear bond strength (SBS). Materials and methods: A total of 120 zirconia blocks were randomly divided into four surface treatments: non-treatment (Control), airborne-particle abrasion (APA) with 50 ㎛ Al2O3 (APA50), APA with 125 ㎛ Al2O3 (APA125), and ZrO2 slurry (ZA). Three resin cements (Panavia F 2.0, Superbond C&B, and Variolink N) were applied to the surface-treated zirconia specimens. All specimens were subjected to SBS testing using a universal testing machine. The surface of the representative specimens of each group was observed by scanning electron microscope (SEM). SBS data were analyzed with oneway ANOVA, two-way ANOVA test and post-hoc Tukey HSD Test (α=.05). Results: In the surface treatment method, APA125, APA50, ZA, and Control showed high shear bond strength in order, but there was no significant difference between APA125 and APA50 (P>.05). Also, ZA showed significantly higher shear bond strength than Control (P<.05). In the resin cement type, Panavia F 2.0, Superbond C&B, and Variolink N showed significantly higher shear bond strength in order (P<.05). In SEM images, the zirconia surfaces of the APA50 and APA125 showed quite rough and irregular shapes, and the zirconia surface of the ZA was observed small irregular porosity and rough surfaces. Conclusion: APA and ZrO2 slurry were enhanced the surface roughness of zirconia, and Panavia F 2.0 containing MDP showed the highest shear bond strength with zirconia.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.135-142
• /
• 2022

Purpose. This study aims to evaluate the combined effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns. Materials and methods. Seven nickel-chromium dies were generated from a 3D model of mandibular first molar using the digital scanner with the following geometries: 1.5 mm occlusal reduction, 1.0 mm deep chamfer. Based on the abutment model, Zirconia blocks (Luxen Zirconia) were selected to fabricate Sixty-three zirconia crowns with occlusal thicknesses of 0.3 mm, 0.5 mm, and 1.5 mm, and different axial thicknesses of 0.3 mm, 0.5 mm, and 1.0 mm. All crowns were cemented by resin cement. Next, the crowns were subjected to load-to-fracture test until fracture using an electronic universal testing machine. In addition, fracture patterns were observed with a scanning electron microscope (SEM). Two-way ANOVA and the Tuckey HSD test for post hoc analysis were used for statistical analysis (P < .05). Results. The mean values of fracture resistancerecorded was higher than the average biting force in the posterior region. The two-way ANOVA showed that the occlusal and axial thickness affected the fracture resistance significantly (P < .05). However, the effect of axial thickness on fracture resistance did not show a statistical difference when thicker than 0.5 mm. The observed failure modes were partial or complete fracture depending on the severity of crack propagation. Conclusion. Within the limitations of the present study, the CAD-CAM monolithic zirconia crown with extremely reduced thickness showed adequate fracture resistance to withstand occlusal load in molar regions. In addition, both occlusal and axial thickness affected the fracture resistance of the zirconia crown and showed different results as combined.

• Korean Journal of Psychosomatic Medicine
• /
• v.31 no.2
• /
• pp.134-141
• /
• 2023

Objectives : The purpose of this study was investigating the differences in temperament, personality, and cognitive function among athletes and non-athletes, as well as differences within athlete groups participating in different-paced sports like baseball and basketball. Methods : A total of 57 professional basketball players, 51 professional baseball players, and 44 non-athletes subjected to temperament and characteristics inventory assessments and computerized neurocognitive function test. One-way analysis of variance (ANOVA) was employed to analyze the average differences in demographic characteristics, temperament, personality traits, and cognitive functions among the three groups, followed by Bonferroni post hoc tests. Comparisons between starters and non-starters within the athlete groups were conducted using the Mann-Whitney U test. Results : In the analysis of temperament, the basketball and baseball player groups exhibited higher reward dependence and persistence compared to the control group. Additionally, in the assessment of personality traits, both basketball and baseball player groups scored higher in self-directedness and cooperativeness compared to the control group, whereas self-transcendence scores were lower. In cognitive ability assessments, baseball and basketball players outperformed the control group in emotional perception tests. Both baseball and basketball players showed lower card movement counts compared to the control group. Conclusions : This study compared the differences in temperament, personality, and cognitive abilities between professional basketball and baseball players and non-athletes. These results provide valuable insights into the temperament, personality, and cognitive abilities of professional athletes, contributing important information for athlete development and coaching goals in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.287-297
• /
• 2014

Purpose: The purpose of this study is to examine the impacts of infection control education on dental hygienists' perceptions for hepatitis B and their behaviors. Materials and methods: Study participants were chosen by random selection among dental hygienists working in Seoul, Korea. A total of 150 questionnaires were sent out for the survey from April 2013 to May 2013, of which 140-excluding incomplete responses-were used for the study. Chi-square tests and t-tests were used (SPSS 19.0), and post-hoc analysis was performed as well. The maximum significance level was 0.05. Results: Average 1.53 times infection control education was taken, but dental hygienists' perceptions for hepatitis B and their behaviors did not show statistical differences whether the education was done or not. Practices to prevent infection showed differences depending on categories, especially disinfection and sterilization were well performed by educated group. The most common reasons for not taking the education and noncompliance with infection prevention guidelines are lack of time and opportunity due to busy schedule. Conclusion: 1. The more highly educated, the greater number of patients per day, and the greater size of hospitals, the better infection control education was conducted. 2. Although hepatitis B is one of the most common chronic liver diseases in Korea, no significant correlation between perceptions of hepatitis B and infection control education was found. 3. Dental hygienists who received infection control education performed more efficient practices for protection against infections than those who did not.

• Journal of Korean Public Health Nursing
• /
• v.15 no.2
• /
• pp.301-313
• /
• 2001

This study was to explore the relationship between nurses' personality type and their job satisfaction level. The subjects of the study were the 364 nurses who were serving at the general surgical department, psychiatric department, pediatric department and emergency room. The hospitals for which they were working were four university hospitals in Daegu and Busan, and six other university hospitals in Seoul were selected as sample hospitals. For data collection, questionnaires were self-reported to the subjects, under their agreement, from May to June, 2000. The following two instruments were used in the study: One was MBTI Test whose Korean version designed and verified to reliability and validity by Kim Jung Taek and Shim Hae Sook(1990): the other was the Nursing Job Satisfaction Instrument, 'The Index of Work Satisfaction' developed by Slavitt, et al.., (1978). The data were analyzed by frequency, t-test, one-way variance analysis, scheffe's post hoc contrast, and Pearson correlation coefficient with SPSS Win 10.0 program. The results this study were as follows ; 1. As a result of testing nurse's personality type by function at each career, it's found that the most personality type was expressed by the ST-type$(37.3\%)$ at 1-5 years, the SF-type$(29.4\%)$ at 6-10 years, the ST-type$(43.3\%)$ at more than 11 years. 2. As a result of testing the disparity in job satisfaction according to career, it appeared that the 6-10 years group showed higher job satisfaction, followed by the 6-10 years$(119.6\%),\;1-5 years(118.6\%)\;and\;more\;than\; 11 years(117.7\%)$ groups. 3. As a result of testing job satisfaction level according to nurse's personality type by function at each career, it's found that the most job satisfaction was expressed by the SF-type(F=8.50, p=0.00l) at 1-5 years. the ST-type(F=30.61, p=0.001) at 6-10 years. the SF-type(F=4.98, p=0.003) at more than 11 years groups. 4. As a result of testing a significant correlation between nurse's personality type by function and job satisfaction level. the SF(r=0.279, p=0.001) and ST(r=0.222, p=0.001) types showed significant positive correlation. and the NF(r=-0.201, p=0.001) and NT(r=-0.402, p=0.001) types revealed significant negative correlation. The nursing management is likely to be done more effectively, if managers in charge of nursing administration carefully reflect nurses' personal opinions in posting and personnel management, keeping in mind that there is a specific personality type that serves to raise job satisfaction at a specific career.

• Korean Journal of Acupuncture
• /
• v.29 no.2
• /
• pp.188-199
• /
• 2012

Objectives : This study was performed to find the desirable remaining time of needle in the acupuncture treatment. Methods : The 21 volunteers were given acupuncture at LU9 vertically and needles were remained for 2 min, 10 min, 15 min, 30 min, respectively. The thermographic change induced by acupuncture was measured with Digital Infrared Thermographic Image at the following acupoints: LU11, LU10, LU9, LU8, LU5, LU1, and PC7. The statistical significance of thermographic change was evaluated using paired t-test and post hoc Wilcoxon test. Results : The most significant changes after acupuncture were produced when needles were remained for 10 min or 15 min. LU11, LU5, LU1, and PC7 were the point at which all of the remaining time produced significant change commonly. At LU11, the biggest change was produced when needle was remained for 15 min, while at LU5, LU1, and PC7, the biggest change was produced when needle was remained for 30 min, and the smallest change was produced when needle was remained for 10 min at all of acupoints of LU11, LU5, LU1, and PC7. The unbalance between left side and right was decreased the most largely in 15 min group. Conclusions : The results of this study suggest that the desirable remaining time of acupuncture needle might be 15 min.