• Journal of Korean Library and Information Science Society
• /
• v.35 no.3
• /
• pp.79-94
• /
• 2004

This research studied the preservation treatment of the papered literature the national treasure 745-9 $\ulcorner$Keumganggyung-samgahae$\lrcorner$, discovered in 1995 from the Four Devas of Borimsa Buddhist Temple at Jangheung County, in the viewpoint of the bibliography. The overall features of the $\ulcorner$Keumganggyung-samgahae$\lrcorner$ were of 25.3cm width, 38.9cm height 1.5cm depth, 58 pages and of high-fine yellow-brown colored reef paper. The book was ruined physically in the shape and color. The covers of the book were deeply stained by the permeated rain and some internal pages were changing into brown color by corrosion. The treatment policies were； maintaining the status quo and capable repeated treatment. And the preservation treatment was done in the sequences of 1) 1st cleaning process, 2) repairing and correcting, 3) 2nd cleaning and preservation 4) cutting, binding the book and making the envelope and wood box. The post-preservation features of $\ulcorner$Keumganggyung-samgahae$\lrcorner$ were； total 64 pages and the size being 25.8 cm width 39.4cm of lenght, and 1.9cm of depth.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.751-756
• /
• 1998

Effects of remote hydrogen plasma cleaning process parameters on the removal of Fe impurities on Si surfaces and the Fe removal mechanism were investigated. Fe removal efficiency is enhanced with decreasing the plasma exposure time and increasing the rf-power. The optimum plasma exposure time and rf-power are 1 min and 100W. respectively, in the range below 10 min and 100W. Fe removal efficiency is better under lower pressures than higher pressures, and the optimum $\textrm{H}_2$ flow rate was found to be 20 and 60sccm, respectively, under a low and a high pressure. The post-RHP(remote hydrogen plasma) annealing enhanced metallic contaminants removal efficiency, and the highest efficiency was achieved at $600^{\circ}C$. According to the AFM analysis results Si surface roughness was improved by 30-50%, which seems to be due to the removal of particles by the plasma cleaning. Also. Fe impurities removal mechanisms by remote hydrogen plasma are discussed.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.67-75
• /
• 2024

In the context of Korean residential heating systems, Ondol pipelines are a prevalent choice. However, the maintenance of these pipelines becomes a complex task once they are embedded within concrete structures. As time progresses, the accumulation of sludge, corrosive oxides, and microorganisms on the inner surfaces of these pipelines diminishes their heating efficiency. In extreme scenarios, this accumulation can induce corrosion and scale formation, compromising the system's integrity. Consequently, this research introduces an ultrasonic generation system tailored for the upkeep of Ondol pipelines, with the objective of empirically assessing its practicality. This investigation delineates three variants of ultrasonic generating apparatuses: those employing surface vibration, external generation, and internal generation techniques. To emulate the presence of contaminants within the pipelines, substances in powder, slurry, and liquid forms were employed. The efficacy of the cleaning process post-ultrasonic wave application was scrutinized over time, with image analysis methodologies being utilized to evaluate the outcomes. The findings indicate that ultrasonic waves, whether generated externally or internally, exert a beneficial effect on the cleanliness of the pipelines. Given the inherent characteristics of Ondol pipelines, external generation proves impractical, thereby rendering internal generation a more viable solution for pipeline maintenance. It is anticipated that future endeavors will pave the way for innovative maintenance strategies for Ondol pipelines, particularly through the advancement of internal generation technologies for pipeline applications.

• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.633-639
• /
• 2015

The experience of natural dyeing is expected to be effective in promoting health through good exercise, in giving emotional stability based on the functional aromatic components of the dyeing material, and in improving self-esteem and increasing positive experiences through the behavior of creation. A natural dyeing material easily found around us, artemisia has long been used in food and Oriental medicine and was recently found to contain antioxidative, anticancer, deodorizing, antibacterial, anti-obesity, and anti-diabetes substances through chemical analysis. It has also been reported that group reminiscence therapy using the fragrance of artemisia is effective in relieving pain and depression and in promoting ego integrity in the elderly population. This study aimed to make a comparative analysis of dyeability, washing fastness, and deodorization between Artemisia princeps, Artemisia iwayomogi, and Artemisia annua, all of which are considered to be healthful and functional dyeing materials, among about thirty domestic plants in the genus of Artemisia and to provide basic data concerning natural dyeing in mind-peace education for the silver generation. The fabric dyed and post-mordanted at $80^{\circ}C$ for 40 minutes showed the greatest surface color variation; in this condition, artemisia princes (32.29) gave the greatest color difference, followed by artemisia iwayomogi (31.07) and artemisia annua (26.17). While all the types of artemisia were excellent in washing fastness, dry-cleaning fastness, and rubbing fastness at the fourth- or fifth-grade, light fastness was at the third grade for artemisia princes, at the second to third grade for artemisia annua, and at the second grade for artemisia iwayomogi; therefore, artemisia princes was found to give better fastness than the other two types of artemisia. In determining functionality of the fabric dyed with artemisia, deodorization test also found that the fabric dyed with artemisia princes had 20% higher deodorization.

• Fashion & Textile Research Journal
• /
• v.14 no.5
• /
• pp.866-877
• /
• 2012

The natural dyeing of hanji cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing were $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics in pre-mordanting. The dyeing equilibrium was shown at the fourth time of repeated dyeing. In the processing of hanji cotton fabrics, K/S value was high when hanji cotton fabric was treated with soybean milk at $90^{\circ}C$. Similar K/S value of dyeing was shown when fabrics were processed with chitosan, regardless of dyeing temperature. High K/S value of dyeing was seen when fabrics processed with gallnut tannin at 40. Fabrics dyed with acidic water extract showed yellowish color. Fabrics dyed with alkaline water extract showed reddish color, and fabrics dyed with ethanol extract showed greenish yellow color. In case of Sn-mordanted fabrics, the washing fastness level was between 3 to 4, and other dyed fabrics showed low fastness. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness of the fabrics was better in dry rubbing than in wet rubbing. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. Hanji cotton fabric maintained certain deodorization in the state of raw fabric. All dyed fabrics showed higher UV protection rate than control fabric.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.150-150
• /
• 2016

Mankind is enjoying a great convenience of their life by the rapid growth of secondary industry since the Industrial Revolution and it is possible due to the invention of huge power such as engine. The automobile which plays the important role of industrial development and human movement is powered by the Engine Module, and especially Diesel engine is widely used because of mechanical durability and energy efficiency. The main work mechanism of the Diesel engine is composed of inhalation of the organic material (coal, oil, etc.), combustion, explosion and exhaust Cycle process then the carbon compound emissions during the last exhaust process are essential which is known as the major causes of air pollution issues in recent years. In particular, COx, called carbon oxide compound which is composed of a very small size of the particles from several ten to hundred nano meter and they exist as a suspension in the atmosphere. These Diesel particles can be accumulated at the respiratory organs and cause many serious diseases. In order to compensate for the weak point of such a Diesel Engine, the DPF(Diesel Particulate Filter) post-cleaning equipment has been used and it mainly consists of ceramic materials(SiC, Cordierite etc) because of the necessity for the engine system durability on the exposure of high temperature, high pressure and chemical harsh environmental. Ceramic Material filter, but it remains a lot of problems yet, such as limitations of collecting very small particles below micro size, high cost due to difficulties of manufacturing process and low fuel consumption efficiency due to back pressure increase by the small pore structure. This study is to test the possibility of new structure by direct infiltration of SiC Whisker on Carbon felt as the next generation filter and this new filter is expected to improve the above various problems of the Ceramic DPF currently in use and reduction of the cost simultaneously. In this experiment, non-catalytic VS CVD (Vapor-Solid Chemical Vaporized Deposition) system was adopted to keep high mechanical properties of SiC and MTS (Methyl-Trichloro-Silane) gas used as source and H2 gas used as dilute gas. From this, the suitable whisker growth for high performance filter was observed depending on each deposition conditions change (input gas ratio, temperature, mass flow rate etc.).

• The Journal of the Korean dental association
• /
• v.53 no.10
• /
• pp.743-750
• /
• 2015

Objectives: This study compared the mechanical efficacy of sonic activated and passive ultrasonic irrigation for removing intracanal medicament from a simulated root canal under controlled conditions. Materials and Methods: Thirty simulated root canal in resin blocks were randomly divided into 3-groups. The canals were enlarged using ProTaper files and K3XF (#30/0.06). After cleaning and drying, canals were filled with Calcipex. Overfilled materials were wiped out and measured their weight to the unit of 1/10mg. After one week storage in 100% humidity $37^{\circ}C$ temperature, canals were irrigated using 20mL of saline with one of following methods according to the designated groups (n = 10). For group-NI, 30-gauge nickel-titanium irrigation needle was used. During irrigation with every 5mL, needle was moved in-and-out with 4-mm amplitudes. EndoActivator and ultrasonic tip were used for group-EA and group-UT respectively for 20 seconds after every 5mL irrigation using needle. Then the weight was measured again to calculate the weight of residual remnants. The data were analyzed by one-way ANOVA and Duncan's post-hoc test at a significance level of 95%. Results: The weight of the residual medicaments were $3.62{\pm}0.81mg$, $2.84{\pm}0.28mg$, and $2.73{\pm}0.90mg$ for group-NI, -EA, and -UT, respectively. Group-EA and group-UT had no significant differences to remove intracanal medicament and left significantly less amount of paste than group-NI (p < 0.05). Conclusions: Under the controlled conditions of this study, the sonic activation and PUI have similar mechanical efficacy for removing intracanal medicament.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.6
• /
• pp.369-378
• /
• 2019

Background: Behavior guidance is a technique used to subdue inappropriate behavior by establishing communication that meets the needs of a child. This study aimed to measure the effectiveness of a mobile app (Little Lovely Dentist) compared to the tell-show-do (TSD) technique in managing anxious children during their first dental visit. Methods: Fifty children (30 boys and 20 girls) without any past dental experience, aged from 7 to 11 years, were randomly allocated into either the dental app group or the TSD group. The pre- and post-operative anxiety of children who underwent prophylactic cleaning was assessed both physiologically and subjectively using a heart rate measurement and the RMS pictorial scale, respectively. Results: The intragroup comparison of heart rate and RMS scores for children allocated to the dental app group was statistically significant (P value ≤ 0.001). However, a significant reduction only occurred in the RMS scores, but not the heart rate measurements, in the TSD group. Conversely, there was an increase in heart rates in the TSD group. Conclusion: Educating the child prior to a dental procedure using a smartphone application such as Little Lovely Dentist can significantly alleviate the anticipatory anxiety and engage children in dental treatment during their first visit.

• Textile Coloration and Finishing
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2002

The aim of study was to elucidate dyeability and antimicrobial and antifungal activity of silk fabrics dyed with Sophora Radix extracts according to different mordants. Dyes were extracted from Sophora Radix using ethanol. Then, silk fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60%(owf), the mordant was 3%(owf), L.R was 1:20, the temperature was $60~60^\circ{C}$, the time of dyeing was 60min., and the time of mordanting was 60min. The dyeability was evaluated by surface color, K/S values and durability of dye. The skin microorganisms used in this study was S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E coli, A. niger, C. albicans and T. mentatrophytes. The results are as follows; 1. When mordants were added, K/S value of silk dyed was not improved much and surface color was 2.2Y to 8.8Y in H(hue) value which indicated greenish yellow to raddish yellow 2. The color fastness tests to light, perspiration, dry-cleaning, rubbing, and stain fabric washing show 4~5th degree which were valuated excellent. The color fastness to fade washing was improved to 3~4th degree by addition of $K_2CrO_7$ mordants. 3. Antibacterial activity of silk dyed using no-mordant as well as mordants was excellent on S. aureus, B. subtilis, S.epidermidis and P.acnes, but showed poor antibacterial activities on P.aeruginosa and E.coli such as gram negative baterials 4. Antifungal activity of silk dyed with ethanol extracts was good on A.niger, C.candida and T.mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 gous in silk dyed mordanting with $SnCl_2\cdot{2H}_2O$.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.320-330
• /
• 2012

The natural dyeing of cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing are $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics were dyed in pre-mordanting. The K/S value of dyeing fabrics could be increased with repetitive dyeing and mordanting. Compared to untreated dyed fabrics, the K/ S values of fabrics which had been treated with soybean milk, chitosan and gall nut tannin were increased. The changed surface colors of fabrics that were treated with soybean milk, chitosan and gall nut tannin were Y, YR and achromatic colors. Fabrics dyed with alkaline water extract showed reddish color. Sn-mordanted fabrics dyed with acidic water extract showed vivid yellowish color, and Cu-mordanted fabrics dyed with ethanol extract showed yellowish green color. In case of Sn-mordanted fabrics, the washing fastness was level 4. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the powder of guava leaf extract and the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.