• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.324-330
• /
• 2013

This paper describes a novel method to surface large optics mirror with an extremely high hardness, which could replace the high cost of the repetitive off-line measurement steps and the large ultra-precision grinding machine with ultra-positioning control of 10 nm resolution. A lot of diamond pellet to be attached on the convex aluminum base consists of a grinding tool for the concave large mirror, and the tool was pressured down on the large mirror blank. The tool motion at an interval on the spiral path was controlled with each feed rate as the dwell time in the conventional computer-controlled polishing. The shape to be surfaced was measured directly by a touch probe on the machine without any separation of the mirror blank. Total 40 iterative steps of the surfacing and measurement could demonstrate the form error of RMS $7.8{\mu}m$, surface roughness of Ra $0.2{\mu}m$ for the mirror blank with diameter of 1 m and spherical radius of curvature of 5400 mm.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1303-1312
• /
• 2013

We report an ultra-precision lathe designed to machine micron-scale features on a large-area roll mold. The lathe can machine rolls up to 600 mm in diameter and 2,500 mm in length. All axes use hydrostatic oil bearings to exploit the high-precision, stiffness, and damping characteristics. The headstock spindle and rotary tooling table are driven by frameless direct drive motors, while coreless linear motors are used for the two linear axes. Finite element method modeling reveals that the effects of structural deformation on the machining accuracy are less than $1{\mu}m$. The results of thermal testing show that the maximum temperature rise at the spindle outer surface is approximately $0.5^{\circ}C$. Finally, performance evaluations of the error motion, micro-positioning capability, and fine-pitch machining demonstrate that the lathe is capable of producing optical-quality surfaces with micron-scale patterns with feature sizes as small as $20{\mu}m$ on a large-area roll mold.

• 한국해양공학회지
• /
• 제32권4호
• /
• pp.287-295
• /
• 2018

This paper presents the results of an exploration of the ferromanganese crusts of Western Pacific Seamount registered by the Korean government. This area has been surveyed with a deep-sea camera and crust samples have been acquired by deep-sea dredging since 2013. On October 18-19, 2017, a united research team from KIOST and KRISO explored two blocks, OSM11 and OSM07, on the seamount using Hemire ROV. A precise survey was conducted on the ferromanganese crusts and sediments covering the slope/top of OSM11 and the middle flat area of OSM07. Rock samples were collected with precise positioning, and HD videos were recorded for 7 hours. This paper discusses the technical issues of this exploration in terms of (1) how to deal with an emergency situation during an electric power blackout, (2) the improvement of the thruster power by adding cooling plugs to the housings of the thruster amplifiers, (3) the relative motion of the depressor by changing the fixing method of the cable terminator, which affects the service life of the cable, (4) a sampling technique for the steep slope of the seamount, (5) integrated navigation under a USBL blackout, and (6) a 3-dimensional image mosaic for visualizing the distribution state of the crusts.

• Journal of Astronomy and Space Sciences
• /
• 제29권4호
• /
• pp.351-362
• /
• 2012

We made a study on real-time determination method for relative position using the laser-measured distance data between satellites. We numerically performed the determination of relative position in accordance with extended Kalman filter algorithm using the vectors obtained through nonlinear equation of relative motion, laser simulator for distance measurement, and attitude determination of chief satellite. Because the spherical parameters of relative distance and direction are used, there occur some changes in precision depending on changes in relative distance when determining the relative position. As a result of simulation, it was possible to determine the relative position with several millimeter-level errors at a distance of 10 km, and sub-millimeter level errors at a distance of 1 km. In addition, we performed the determination of relative position assuming the case that global positioning system data was not received for long hours to see the impact of determination of chief satellite orbit on the determination of relative position. The determination of precise relative position at a long distance carried out in this study can be used for scientific mission using the satellite formation flying.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.174-174
• /
• 2009

The acromioclavicular-hook-plate is one of the surgical treatments for distal clavicle fracture and traumatic acromioclavicular (AC) joint dislocation. Although this procedure can obtain rigid and accurate anatomical reduction of the AC joint, secondary widening of the hook-hole in the acromion is often seen during postoperative follow-up. This complication is owing to the high-degree of mobility of the AC joint. Therefore, it is important to evaluate the effect on these complications due to the position of the hook-hole. The purpose of the present study is to investigate three-dimensionally the effect due to the position of the hook-hole during arm abduction motion. We studied in vivo and three-dimensional kinematics of the normal shoulder joint with use of a markerless bone-registration technique. Magnetic resonance images of 14 shoulders of 7 healthy volunteers were acquired in 7 positions between $0^{\circ}$ and $180^{\circ}$ of abduction. We created three-dimensional computer models of the bones and the acromioclavicular-hook-plate. Based on the three-dimensional kinematics data, we simulated the widening of the hook-hole each different positioning of the hook-hole. The widths of the hook-holes almost linearly increased. And these widths significantly increased, when we put the hook-hole on the acromion from AC joint to 20 mm and 25 mm posterior position.

• Annals of Clinical Neurophysiology
• /
• 제8권1호
• /
• pp.40-43
• /
• 2006

Background: Benign paroxysmal positional vertigo (BPPV) is a relatively common disorder, and is characterized by episodic vertigo and nystagmus which was provoked by head motion. However, little is known about the short and long-term outcome and the prognostic factors for recurrence of BPPV. In this pilot study, we tried to identify the prognostic factors of BPPV for short-term outcome. Methods: We analyzed clinical features of 32 patients (men=21, mean $age=60.4^{\circ}{\pm}12.6y$) with BPPV that was diagnosed by typical nystagmus induced by positioning maneuver. The induced nystagmus was recorded using video-oculography (VOG). According to the semicircular canal involved, BPPV patients were classified into horizontal, posterior, or anterior canal type. Univariate analysis for age, sex, and history of vertigo, and Kaplan-Meier analysis for each canal type were performed. Results: Horizontal (n=21, 65.6%) semicircular canal type BPPV was more common than the posterior one (n=11, 34.4%). Median follow-up period was 113 day (from 34 to 216 days). Four patients with horizontal canal type BPPV had recurrent attacks. Age, history of vertigo, and days prior to diagnosis were not different between canal type. Overall recurrence rate of horizontal canal type BPPV by Kaplan-Meier estimation was 19% at 60 days (p=0.13). Conclusions: Horizontal canal type BPPV was more common and recurred more frequently than posterior canal type in the present study. However, we did not find prognostic factors for recurrence of BPPV.

• 제어로봇시스템학회논문지
• /
• 제22권10호
• /
• pp.853-858
• /
• 2016

Cooperation and collaboration with robots are key functions of robotic utility that are currently developing. Thus, robots should be safe and resemble human beings to cope with these needs. In particular, dual-arm robots that mimic human kinetics are becoming the focus of recent industrial robotics research. Their size is similar to the size of a human adult; however, they lack natural, human-like motion. One of the critical reasons for this is the shoulder complex. Most recent dual-arm robots have only 2 degrees of freedoms (DOFs), which significantly limits the workspace and mobility of the shoulders and arms. Therefore, a redundant shoulder complex could be very important in new developments that enable new capabilities. However, constructing a kinematically redundant shoulder complex is difficult because of spatial constraints. Therefore, we propose a novel, redundant shoulder complex for a human-like robot that is driven by flexible wire tendons. This kinematically redundant shoulder complex allows human-like robots to move more naturally because of redundant DOFs. To control the proposed shoulder complex, a hybrid control scheme is used. The positioning precision has also been considered, and the ability of the shoulder complex to perform several human-like motions has been verified.

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1472-1488
• /
• 2019

Critical elements in the China's Lunar Exploration reside in that the lunar rover travels over the surrounding undetermined environment and it conducts scientific exploration under the ground control via teleoperation system. Such an interplanetary transportation mission teleoperation system belongs to the ground application system in deep space mission, which performs terrain reconstruction, visual positioning, path planning, and rover motion control by receiving telemetry data. It plays a vital role in the whole lunar exploration operation and its so-called trustworthy evidence must be assessed before and during its implementation. Taking ISO standards and China's national military standards as trustworthy evidence source, the net assessment model and net assessment method of teleoperation system are established in this paper. The multi-dimensional net assessment model covering the life cycle of software is defined by extracting the trustworthy evidences from trustworthy evidence source. The qualitative decisions are converted to quantitative weights through the net assessment method (NAM) combined with fuzzy analytic hierarchy process (FAHP) and entropy weight method (EWM) to determine the weight of the evidence elements in the net assessment model. The paper employs the teleoperation system for interplanetary transportation as a case study. The experimental result drawn shows the validity and rationality of net assessment model and method. In the final part of this paper, the untrustworthy elements of the teleoperation system are discovered and an improvement scheme is established upon the "net result". The work completed in this paper has been applied in the development of the teleoperation system of China's Chang'e-3 (CE-3) "Jade Rabbit-1" and Chang'e-4 (CE-4) "Jade Rabbit-2" rover successfully. Besides, it will be implemented in China's Chang'e-5 (CE-5) mission in 2019. What's more, it will be promoted in the Mars exploration mission in 2020. Therefore it is valuable to the development process improvement of aerospace information system.

• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.1077-1085
• /
• 2016

선형 롤러베어링은 하중이 크고 정밀성이 요구되는 이송장치를 지지하기 위해 광범위하게 사용되는 기계요소이다. 본 논문에서는 외력을 받는 선형 롤러베어링의 변위를 계산하기 위한 새로운 모델링 방법을 제시하였다. 먼저 LM 블록을 강체로 가정하여 롤러와 LM 블록의 지배방정식을 유도하였고 Newton-Raphson법을 이용해 계산하였다. 롤러와 레이스 사이의 접촉하중은 롤러의 형상을 고려하여 슬라이싱 기법을 이용하여 계산하였다. 강체 LM 블록 모델에 의해 계산된 접촉하중을 활용하여 LM 블록의 구조적 변형을 유한요소 모델로부터 계산하였다. 최종적인 변위는 강체 LM 블록을 가정한 모델로부터 계산된 변위와 LM 블록 구조해석 결과를 조합하여 도출하였다. 제안된 방법에 의한 결과와 베어링 제작 업체 프로그램 결과와의 비교를 통해 제안된 방법을 검증하였다.

• 조명전기설비학회논문지
• /
• 제13권4호
• /
• pp.142-151
• /
• 1999

리니어 펄스 모터(LPM)는 유연한 선형운동이 필요한 분야에 사용되며 LPM의 위치정밀도는 리드스쿠류 보다 매우 높다. LPM은 간단한 기계적 구조, 고 반복성, 정밀한 오픈루프 동작 및 저 관성 등의 장점을 지니고 있으므로 공장 자동화 및 고속 위치제어용과 같은 응용분야에서 광범위하게 활용된다. 본 논문에서는 고 정밀성과 반복성을 지닌 LPM의 힘 특성을 해석하였다. 추력과 수직력은 고정자와 가동자의 치 피치와 공극에 매우 민감하다. 이 때 수직력은 추력에 비해서 매우 높지만 추력도 상당히 크다. 본 LPM의 자기회로는 복잡한 구조이기 때문에, 힘을 계산하기 위한 적합한 방법으로는 유한요소법(FEM)을 적용한다. 여기서는 가상변위와 맥스웰 응력을 이용하였다.