• 전자공학회지
• /
• 제23권11호
• /
• pp.89-100
• /
• 1996

이 논문에서는 GPS의 고속 측지 알고리즘에 활용될 고속 삼각함수 계산회로를 제안하였으며, 그 시제작을 위하여 FPGA를 활용한 예를 제시하였다. 기존의 삼각함수 계산에 사용되는 CORDIC알고리즘을 파이프라인 구조로 구현하여 다량의 계산을 전체적으로 신속하게 수행할 수 있는 구조를 설계하였다. 이 파이프라인 구조는 계산결과의 정밀도의 요구에 따라 칩의 회로의 규모를 가변시킬 수 있도록 단계 슬라이스형 구조를 도입하였다. 제어회로와 연산회로를 모두 파이프라인 구조를 모두 단계 슬라이스 형으로 설계하였으며, 파이프라인 슬라이스의 개수에 따라 정밀도가 달라지게 하였다. 또한 FPGA칩을 여러개 사용하여 전체 파이프라인이 구성되는 관계로 칩간 통신에는 더미사이클을 도입하여 칩의 입출력에 필요한 시간을 확보하는 기법을 구사하였다.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.58-67
• /
• 2005

To overcome limitations of test scope, schedule and cost, M&S(Modeling & Simulation) technique has been applied for T&E(Test and Evaluation) of the state-of-art weapon systems. This paper proposes an air defense simulation software framework to reduce both redundancy an[1 programming errors in system simulator. The proposed framework consists of a 'model' and a 'middleware' The 'middleware' is a reliable communication service layer that supports not only HLA(High Level Architecture) which is an international standard in M&S but also TCP/IP, UDP and etc. The main role of 'model' is to schedule and to run the real-time distributed simulation. The proposed framework has been applied to M-SAM(Middle range Surface to Air Missile) system simulator. The proposed framework's scheduling and communication performance results are satisfactory and were measured by hardwired NTP(Network Timer Protocol) time-stamp with GPS(Global Positioning System) timer for better precision.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권2호
• /
• pp.43-49
• /
• 2000

The Global Positioning System (GPS) is becoming more attractive navigation means for LEO (Low Earth Orbit) spacecraft due to the data accuracy and convenience for utilization. The anomalies such as serious variations of Dilution-Of-Precision (DOP), loss of infrequent 3-dimensional position fix, and deterioration of instantaneous accuracy of position and velocity data could be observed, which have not been appeared during the ground testing. It may cause lots of difficulty for the processing of the orbit control algorithm using the GPS data. In this paper, the characteristics of the GPS data were analyzed according to the configuration of GPS receiver such as position fix algorithm and mask angle using GPS navigation data obtained from the first Korea Multi-Purpose Satellite (KOMPSAT). The problem in orbit tracking using GPS data, including the infrequent deterioration of the accuracy, and an efficient algorithm for its countermeasures has also been introduced. The reliability and efficiency of the modified algorithm were verified by analyzing the effect of the results between algorithm simulation using KOMPSAT flight data and ground simulator.

• 한국통신학회논문지
• /
• 제35권11B호
• /
• pp.1618-1623
• /
• 2010

이 논문에서 지상파 DMB (T-DMB)의 데이터 서비스를 이용한 새로운 assisted GPS (A-GPS) 시스템을 제안한다. GPS 위성에서 전달되는 약한 신호와 신호 차단 때문에 델리매틱 단말기는 도심 환경에서 위치 결정에 어려움을 가지고 있다. 제안된 A-GPS 시스템은 GPS 위성으로부터 수신된 신호로부터 가상 거리를 계산하고 T-DMB 방송국으로부터 위성 정보 (ephemeris)를 수신하여 단말기의 위치를 결정하게 된다. GPS 시스템과 비교하여 제안된 시스템은 빠른 TTFF (time to first fix), 낮은 HDOP (horizontal dilution of position) 등의 향상된 성능을 보여준다. 실험을 통하여 제안된 시스템은 A-GPS 시스템으로서 구현 가능하고 강력한 방법이라는 사실을 확인할 수 있다.

• 설비공학논문집
• /
• 제19권12호
• /
• pp.874-882
• /
• 2007

The effects of a guide fin blade on the flow characteristics in a ventilating axial fan were investigated experimentally. The guide fins were setup onto the pressure surface of the blade, and their effects on the flowrate were evaluated. Two types of the guide fin blade were designed. One is the stem fin blade, and the other is the radial fin blade. The stem fin is designed normal to the circumference of a circle, and the radial fin is designed along the circumference of a circle. The results from the guide fin blade fans are compared with that of the blade without guide fins. The position and the geometry of the radial fin setting up on the blade have an effect on the increase of flowrate with the minor sacrifice of rotational speed of the blades. The radial fin positioning at 0.84 times blade diameter shows highest performance in the flowrate. The increase of the blade weight resulting from applying the guide fins shows minor effect on the variation of rotational speed of the blades.

• 반도체디스플레이기술학회지
• /
• 제13권2호
• /
• pp.45-52
• /
• 2014

This paper proposes an efficient photo retrieval system that automatically indexes for searching of relevant images, using a combination of geo-coded information, direction/location of image capture device and content-based visual features. A photo image is labeled with its GPS (Global Positioning System) coordinates and direction of the camera view at the moment of capture, and the label leads to generate a geo-spatial index with three core elements of latitude, longitude and viewing direction. Then, content-based visual features are extracted and combined with the geo-spatial information, for indexing and retrieving the photo images. For user's querying process, the proposed method adopts two steps as a progressive approach, filtering the relevant subset prior to use a content-based ranking function. To evaluate the performance of the proposed scheme, we assess the simulation performance in terms of average precision and F-score, using a natural photo collection. Comparing the proposed approach to retrieve using only visual features, an improvement of 20.8% was observed. The experimental results show that the proposed method exhibited a significant enhancement of around 7.2% in retrieval effectiveness, compared to previous work. These results reveal that a combination of context and content analysis is markedly more efficient and meaningful that using only visual feature for image search.

• Journal of Astronomy and Space Sciences
• /
• 제26권1호
• /
• pp.59-74
• /
• 2009

Relative navigation system is presented using GPS measurements from a single-channel global positioning system (GPS) simulator. The objective of this study is to provide the real-time inter-satellite relative positions as well as absolute positions for two formation flying satellites in low earth orbit. To improve the navigation performance, the absolute states are estimated using ion-free GRAPHIC (group and phase ionospheric correction) pseudo-ranges and the relative states are determined using double differential carrier-phase data and singled-differential C/A code data based on the extended Kalman filter and the unscented Kalman filter. Furthermore, pseudo-relative dynamic model and modified relative measurement model are developed. This modified EKF method prevents non-linearity of the measurement model from degrading precision by applying linearization about absolute navigation solutions not about the priori estimates. The LAMBDA method also has been used to improve the relative navigation performance by fixing ambiguities to integers for precise relative navigation. The software-based simulation has been performed and the steady state accuracies of 1 m and 6 mm ($1{\sigma}$ of 3-dimensional difference errors) are achieved for the absolute and relative navigation using EKF for a short baseline leader/follower formation. In addition, the navigation performances are compared for the EKF and the UKF for 10 hours simulation, and relative position errors are mm-level for the two filters showing the similar trends.

• 대한공간정보학회지
• /
• 제14권3호
• /
• pp.79-86
• /
• 2006

현재 3차원 지상 레이저 스캐너를 통해서 짧은 시간에 대상물의 수많은 위치에 대한 고정도의 3차원 좌표를 얻을 수 있다. 그래서 최근에 지상 레이저 스캐닝은 측지분야를 포함하여 토목공학, 고고학 및 건축, 그리고 응급서비스 및 국방, 기타 등 다양한 분야에서 널리 응용되고 있다. 본 연구는 지상 라이다를 이용한 현황측량을 다루었으며, 실험측량 결과 대상물의 선형 특징추출이 가능하였으며 토탈스테이션 측량성과에 필적하는 위치결정 정확도를 얻었다. 이를 통해 향후 항공 라이다와 항공사진측량기술과의 결합에 의해 지상 레이저 스캐닝의 잠재응용분야는 더욱 증대될 것으로 기대된다.

• 제어로봇시스템학회논문지
• /
• 제14권3호
• /
• pp.242-247
• /
• 2008

As an absolute positioning system, iGS is designed based on ultrasonic signals whose speed can be formulated clearly in terms of time and room temperature, which is utilized for a mobile robot localization. The iGS is composed of an RFID receiver and an ultra-sonic transmitter, where an RFID is designated to synchronize the transmitter and receiver of the ultrasonic signal. The traveling time of the ultrasonic signal has been used to calculate the distance between the iGS system and a beacon which is located at a pre-determined location. This paper suggests an effective operation method of iGS to estimate position of the mobile robot working in unstructured environment. To expand recognition range and to improve accuracy of the system, two strategies are proposed: utilization of beacons belonging to neighboring blocks and removal of the environment-reflected ultrasonic signals. As the results, the ubiquitous localization system based on iGS as a pseudo-satellite system has been developed successfully with a low cost, a high update rate, and relatively high precision.

• 제어로봇시스템학회논문지
• /
• 제18권10호
• /
• pp.977-987
• /
• 2012

One of the most significant errors in the pseudo-range measurement performance of GNSSes (Global Navigation Satellite Systems) is their multipath error for high-precision applications. Several schemes to mitigate this error have been studied. Most of them, however, have been focused on the GPS (Global Positioning System) L1 C/A (Coarse/Acquisition) signal that was designed in the 1970s and is still being used for civil navigation. Recently, several modernized signals that were especially conceived to more significantly mitigate multipath errors have been introduced, such as Time Multiplexed and Composite Binary Offset Carrier (TMBOC and CBOC, respectively) signals. Despite this advantage, however, a problem remains with the use of TMBOC and CBOC modulations: the ambiguity of BOC (Binary Offset Carrier)-modulated signal tracking. In this paper, a novel unambiguous multipath error mitigation scheme for these modernized signals is proposed. The proposed scheme has the same complexity as HRCs (High Resolution Correlators) but with low ambiguity. The simulation results showed that the proposed scheme outperformed or performed at par with the HRC in terms of their multipath error envelopes and running averages in the static and statistical channel models. The ranging error derived by the mean multipath error of the proposed scheme was below 1.8 meters in an urban area in the statistical channel model.