• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.281-285
• /
• 1997

We developed the system which could trace the hand and arm motion to test the product usability by integrating a wired-glove and a magnetic position sensing system. The magnetic position sensing system traces the position and orientation of the arm while the sired-glove measures 18 phal angeal joint angles. A case study was performed on two different camcorders in weight. The heavier camcorder was more stable than the lighter one. Also the recording task is more stable than the zoom-in and zoom-out tasks. This system could be used to monitor and quantify the hand and arm motion in real time and also could be used to test the product usability where the hand motion is important.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.433-434
• /
• 2012

In this paper, we developed the algorithm which tracking the vehicle and deciding the moment of dumping in landfills. We first trace the position of vehicle using the difference image between current image and background image and then we decide the stop point from the shape of vehicle route and detect the dumping point by comparing the dumping image with the image that vehicle is stopping.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.1 s.41
• /
• pp.53-63
• /
• 1992

The purpose of this study is to investigate the method of trace gas technique by G.C and the effects of the type of blouse on ventilation. The experimental system employed a trace gas technique in which ventilation was monitored to determine oxigen exchange rate. The experimental variables were tested with three types of blouse depending on the sizes of neckline, armhole and waist line. Exercise conditions include standing and walking position. The results and discussion forcused on the construct validity of the apparatus/testing protocol. the effect of experimental variables on ventilation was also discussed.

• Convergence Security Journal
• /
• v.13 no.3
• /
• pp.47-54
• /
• 2013

Ad-hoc network is composed of mobile nodes and has a vulnerability of attack like on conventional wire networks. So, many studies have been conducted to apply the traceback mechanism on wire network to Ad-hoc network. In this paper, a new mechanism that can trace back to IP source of spoofing DDoS packet using iTrace message on Ad-hoc network is proposed. The proposed mechanism implements ICMP Traceback message and the traceback path between agents allocated in local network and a server located in management network. Also the proposed mechanism can trace the position of attacker even after an attack is over and has extendability through standardization by using a mechanism that IETF proposed. Result of performance evaluation shows a great improvement in terms of load, integrity, safety, traceback function as compared with conventional mechanisms.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.321-332
• /
• 1999

It is important to detect objects movement for obstacle recognition and path searching of UCT(unmanned container transporters) with vision sensor. This paper shows the method to draw out objects and to trace the trajectory of the moving object using a CCD camera and it describes the method to recognize the shape of objects by neural network. We can transform pixel points to objects position of the real space using the proposed viewport. This proposed technique is used by the single vision system based on floor map.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.60-67
• /
• 2000

In this study, we constructed a preview-sensing visual sensor system for weld seam tracking in GMA welding. The visual sensor consists of a CCD camera, a diode laser system with a cylindrical lens and a band-pass-filter to overcome the degrading of image due to spatters and/or arc light. To obtain weld joint position and edge points accurately from the captured image, we compared Hough transform method with central difference method. As a result, we present Hough transform method can more accurately extract the points and it can be applied to real time weld seam tracking. Image processing is carried out to extract straight lines that express laser stripe. After extracting the lines, weld joint position and edge points is determined by intersecting points of the lines. Although a spatter trace is in the image, it is possible to recognize the position of weld joint. Weld seam tracking was precisely implemented with adopting Hough transform method, and it is possible to track the weld seam in the case of offset angle is in the region of $\pm15^{\circ}$.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.47.1-47.1
• /
• 2017

We study the alignment of kinematic position angles (PAkin) of early-type galaxies in the Virgo cluster using Atlas3D data. The PAkin represent the direction of the angular momentum of the galaxies better than the photometric position angles. Therefore, the alignment of their PA$_{kin}$ is a useful tool to trace the momentum direction. The early-type galaxies in the Virgo cluster have been known to be distributed as filamentary structures inside the cluster. We found that their PAkin are aligned to two directions of 20degree and -80degree. This fact is confirmed using the bootstrap test, and that is, the two alignment angles are statistically significant. Besides, these two angles are surprisingly aligned parallel to the filamentary structures inside the cluster. These results suggest that early-type galaxies were formed by major merging in the filament structures and then fall into the Virgo cluster while maintaining their position angles.

• Journal of architectural history
• /
• v.8 no.1 s.18
• /
• pp.53-62
• /
• 1999

Modernism in architecture is a very complex and contradictory phenomena. So much so that it has been defined in various ways throughout the history, depending on one's position in the cultural and historical circumstances. It is thus necessary to map out the various concepts of modernism and their relationships in order to have a more comprehensive understanding of modern architecture. This paper attempts to define the various positions as functionalism, formalism and artistic avant-gardism, and to trace their history from the early twentieth century to the present. The change of the concept of modernism from functionalism to artistic avant-gardism seems a logical process in the history of western modem culture. The tendency of contemporary architecture to be more abstract and self referential artistic practice reflects the fragmentation of modern culture and the separation of art and technology. The validity of this position, of course, depends on how one evaluates the role of modern art in the situation of modern culture. It could be viewed either negatively or positively. However, this position is problematic in that it disregards the fundamental differences between architecture and other arts and distanced architecture farther from its material base. Given this historical perspective on the concept of modernism, modernism in Korea should not viewed simply identical to the western modernism, nor should western modernism be imported uncritically. The characteristics of her modernization and their differences from the west should be considered, along with the different status and role of architecture in korean modern society.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.10 no.1
• /
• pp.25-30
• /
• 2010

This paper is proposed about three axis motion control camera design method based on wires. Original motion control camera consists of track, boom, L-Head, Camera and so on and is enormous and expensive. But proposed motion control camera adjusts wire length using encoders and motors. And position control use position based straight line of straight-line move method for moving precise position. Proposed simple design is able to use various place and inexpensive than original motion control camera. But, camera was vibrated and rotated due to basic property of wire. So we proposed solutions that connected method of wire and using a tensional object for reducing rotation. For proposed algorithm verification, we realized three axis motion control camera based on wire and measured oscillation while moving same trace. We confirmed the results that standard deviation of oscillation was reduced 4.93 degree than before design method.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.8
• /
• pp.75-83
• /
• 2019

In this paper, we propose a method that can detect and trace the end point of real - time reinforcement steel to various environmental conditions of industrial field by using Median flow and Depth information. We proposed a method to derive two steel end points by using Median filter, Binarization, Morphology, and Blob algorithm on image depth information. The coordinates of the final position were determined by comparing the coordinates of the reinforcement steel endpoints detected in the Depth image and the position tracking coordinates of the reinforcement steel using Median Flow. As a result, when the existing Median Flow method was used, the success rate of the final position determination of reinforcement steel of 75% was increased to 95% when the Depth of reinforcement steel was used.