• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1029-1031
• /
• 2005

A magnetic position sensor is a apparatus that detect the rotating position by measuring the value of the flux density of the rotating position. In this paper, the magnetization system of the permanent magnet in the magnetic position sensor which detects the rotating position was designed. The permanent magnet was magnetized for the flux density into the hole element to be sinusoidal distribution according to the rotating position. To make the sinusoidal distribution of flux density, the magnetization values according to the position in permanent magnet were varied by adjusting the air gap between the pole of the magnetization fixture and the surface of the permanent magnet.

• 센서학회지
• /
• 제29권4호
• /
• pp.237-242
• /
• 2020

This paper deals with relative position estimation using a Kalman filter (KF) based on inertial sensors that have been widely used in various biomechanics-related outdoor applications. In previous studies, the relative position is determined using relative orientation and predetermined segment-to-joint (S2J) vectors, which are assumed to be constant. However, because body segments are influenced by soft tissue artifacts (STAs), including the deformation and sliding of the skin over the underlying bone structures, they are not constant, resulting in significant errors during relative position estimation. In this study, relative position estimation was performed using a KF, where the S2J vectors were adopted as time-varying states. The joint constraint and the variations of the S2J vectors were used to develop a measurement model of the proposed KF. Accordingly, the covariance matrix corresponding to the variations of the S2J vectors continuously changed within the ranges of the STA-causing flexion angles. The experimental results of the knee flexion tests showed that the proposed KF decreased the estimation errors in the longitudinal and lateral directions by 8.86 and 17.89 mm, respectively, compared with a conventional approach based on the application of constant S2J vectors.

• 제어로봇시스템학회논문지
• /
• 제13권1호
• /
• pp.39-45
• /
• 2007

This paper proposes a method of container position measurement using automatic landing system that is estimated by a laser range finder. In the most of container position measurement methods, CCD cameras or laser scanners have been used to get the source data. However those sensors are not only weak for disturbances, for examples, the light, fog, and rain, but also the system cost is high. When the spreader arrives at the goal position, it is still swung by inertia or by wind effect. In this paper, the spreader swung data have been used to find the container position. The laser range finder is equipped in the front side of spreader. It can measure distance and relative position between spreader and container. This laser range finder can be rotated as desired by a motor. And a tilt sensor is equipped on the spreader to measure spreader sway. The relative position information between the spreader and a container using the laser range finder and tilt sensor is estimated through the geometrical analysis.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.23-32
• /
• 2019

This study proposed a fault tolerant control algorithm for electro-hydraulic brake systems where permanent magnet synchronous motor (PMSM) drive is adopted to boost the braking pressure. To cope with motor position sensor faults in the PMSM drive, a braking pressure controller based on an open-loop speed control method for the PMSM was proposed. The magnitude of the current vector was determined from the target braking pressure, and motor rotational speed was derived from the pressure control error to build up the braking pressure. The position offset of the pump piston resulting from a leak in the hydraulic system is also compensated for using the open-loop speed control by moving the piston backward until it is blocked at the end of stroke position. The performance and stability of the proposed controller were experimentally verified. According to the results, the control algorithm can be utilized as an effective means of degraded control for electro-hydraulic brake systems in the case that a motor position sensor fault occurs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.685-686
• /
• 2008

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1520-1525
• /
• 2009

본 연구는 철강 회사의 기존 크레인의 위치 제어 시스템을 USN(Ubiquitous Sensor Network)과 GPS(Global Positioning System) 시스템으로 대체하기 위한 시뮬레이션을 수행한 것이다. 크레인의 위치 제어 시스템을 지상국과 차상국의 통제 시스템으로 구분하였으며, 하드웨어 시스템은 GPS위성으로부터 크레인의 위치 제어 데이터를 수신하는 GPS 수신기 모듈, 지상국과 차상국 간 통신을 하기 위한 블루투스 통신 모듈, 크레인의 위치를 정밀하게 제어하는 초음파 센서 모듈, 크레인의 롤러를 대체한 모터, GPS 수신기 모듈과 블루투스 통신 모듈, 초음파 센서 모듈을 제어하는 임베디드 MCU (ATmega1/28L) 등으로 구성하였으며, 소프트웨어 시스템은 GPS 위성으로부터 GPS 수신기 모듈에 수신된 데이터 중 GGA 출력 문장을 필터링하기 위한 프로그램, 초음파 센서 구동프로그램, 크레인의 위치를 실시간으로 모니터링 할 수 있는 디지털 지도 프로그램 등으로 구성하였다. 제안한 시스템은 위치제어를 1cm 간격으로 정확하게 조절이 가능함을 실험을 통해 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.433-437
• /
• 1988

Direct measurement of the relative position between the end effector of robot and moving objects reduces difficulties caused by the joint encoder reading and transformation. For those purpose, the on-line sensing method using PSD sensor was developed in this paper. The sensor was calibrated on the precision table. Then, the relative position of a moving objects on the conveyor was measured while the robot was tracking the one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.333-335
• /
• 2006

In this page, we developed the inspection system for automobile parts using the laser vision sensor. Laser vision sensor has gotten 2 dimensions information and third dimension information of laser vision camera using the vision camera. Used JIG and ROBOT for inspection position transfer. Also, computer integration system developed that control system component pal1s and manage data measurement information. Compare sensor measurement result with CAD Data and verified measurement result effectiveness taking advantage of CAD to get information of measurement object.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1294-1300
• /
• 2010

노드들 모두가 움직이는 환경에서 센서 노드는 통신반경 안의 앵커 노드 위치정보를 수신 받아 자신이 이동한 거리와 방향만큼 수신한 앵커 노드 위치정보를 수정하여 자신의 메모리에 저장하고, 3개 이상이 되면 삼변 측량에 의해 localization을 수행하여 자신의 위치를 결정한다. 일정한 거리를 유지하고 노드들이 같은 방향으로 움직이는 환경에서는 센서 노드가 1홉 범위에서 절대좌표를 가진 앵커 노드를 3개 이상 만날 확률이 적다. 만약 센서 노드가 3개 이상의 비콘 정보로 자신의 위치를 추정하였다고 하여도 시간이 경과하면서 가속도기와 디지털 나침반의 각 ${\theta}$ 오차가 지속적으로 적용되어 오차범위는 커지고 추정된 위치도 신뢰받지 못한다. Dead reckoning 기술은 GPS가 동작하지 않는 곳에서 보조적인 위치 추적 항법 기술로 사용되고 있는데 가속도 센서와 디지털 나침반으로 노드가 움직인 거리와 방향을 알면 자신의 위치를 추정할 수 있다. 위치 인식 알고리즘은 Dead reckoning 을 이용한 위치인식 기법으로 모든 노드가 전방향성 안테나를 장착하고, 가속도기와 디지털 나침반으로 자신이 이동한 거리와 이동 방향을 알 수 있다고 가정한다. Matlab을 이용하여 시뮬레이션한 결과 다른 기법(MCL,DV-distance)들 보다 우수함을 증명하였다.

• Journal of Power Electronics
• /
• 제5권1호
• /
• pp.62-66
• /
• 2005

A simple fault correction method for rotor position detection of a brushless DC(BLDC) motor with trapezoidal back EMF(electromotive force) using a Hall effect latch unit is presented. The reason why the Hall effect latch unit does not operate properly during the startup of a BLDC motor is thoroughly explained. To solve this problem, a simple code change method and its hardware implementation issues are proposed and discussed.