• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.87-90
• /
• 1992

Detecting acoustic emission (AE) provides an appropriate method to diagonize on-line transformers, since acoustic signal is not influenced by strong electric field. Then AE versus AE signal processing method is investigated. But this processing is difficult that decision of starting point of AE wave with acoustic noise. This problem is sloved by correlation which calculate time interval between two signals eactly. This paper presents a technique locating the eact position of the partial discharge (PD) in a power transformer by the correlation of the AE signals from two ultrasonic sensors. And PD position is displayed on monitor. Laboratory tests confirmed that the proposed method can be used for locating the PD in power transformer.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.972-975
• /
• 2004

This paper presents a simulation results of sensorless control of Switched Reluctance Motor(SRM) using neural network. The basic algorithm of this scheme is based on the flux linkage characteristic according to the phase current and the rotor position. A sufficient simulation data was used for neural network training. Through measurement of the phase flux linkage and phase currents the neural network is able to estimate the rotor position. The simulation result shows some good results, and possibility of this algorithm.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1154-1156
• /
• 2001

This paper presents the implementation of a positon sensorless vector control system of a PM linear synchronous motor by sliding mode observer based on TMS320F240 DSP controller. Sliding mode observer estimates the secondary velocity and position based on the measurement of current, and it shows very robust characteristic to parameter variation. Therefore, it improves the system performance deterioration caused by system parameter variations. Simulation and experimental considerations are presented to confirm the applicability of sliding mode observer to the sensorless position control of PMLSM.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.281-285
• /
• 1997

We developed the system which could trace the hand and arm motion to test the product usability by integrating a wired-glove and a magnetic position sensing system. The magnetic position sensing system traces the position and orientation of the arm while the sired-glove measures 18 phal angeal joint angles. A case study was performed on two different camcorders in weight. The heavier camcorder was more stable than the lighter one. Also the recording task is more stable than the zoom-in and zoom-out tasks. This system could be used to monitor and quantify the hand and arm motion in real time and also could be used to test the product usability where the hand motion is important.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.125-130
• /
• 2001

Skilled typists can type characters or words without looking at keyboard, relying on the finger's relative position. If the relative positions of the fingers can be identified, a virtual keyboard may be accomplished by applying the concept of "DataGlove" or "FingerRing". The virtual keyboard may be efficient as a new mobile input device supporting QWERTY keyboard layout. For the purpose of investigating skilled typing pattern, in this paper the touch-positions of the fingers are measured with a touchscreen while five skilled typists type a long sentence. From these measurements it can be observed that the groups of touch-positions are classified into alphabet characters. Though there are some overlapped groups we can find constant distances capable of being discriminated among the groups from investigation of the change of touch-position for touch-time. Based on the analysis, the prediction algorithm of the constant distance is proposed and evaluated, which is useful for realization of a portable virtual keyboard.le virtual keyboard.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.45-53
• /
• 2004

In this paper, an INS compensation algorithm for auto sailing system is proposed, where low cost IMU (Inertial Measurement Unit) is used for measuring the accelerometer data. First, we denote the basic INS algorithm with IMU and show that how to compensate the error of position by using low cost IMU. Second, in considering the ship's characteristic and ocean environments, we consider with a factor as a periodic external disturbance which effects to the exact position. To develop the compensation algorithm, we use a repetitive method to reduce the external environment changes. Lastly, we verify the proposed algorithm by using experiments results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.129.5-129
• /
• 2001

When a robot manipulator performs some task like grinding or assembling, not only the position control but also the force control of the tools connected to the robot must be controlled. But at this time We were received the uncertainty problems of system information for the force control, for example disturbance, senor resolution and measurement noise. Therefore we proposed fuzzy logic control method instead of existing control theory for the robot manipulator control, for example PID control method. In this paper, We proposed hybrid position/force control of robot manipulator using fuzzy logic control method. To show the validity of the proposed fuzzy controller, We compared fuzzy controller with conventional PID controller.

• Journal of the Korean Society of Visualization
• /
• v.10 no.3
• /
• pp.11-15
• /
• 2012

Inertial migration phenomena of phytoplankton in pipe flows were investigated using a digital holography technique. As the Reynolds number increases, the microorganisms suspended in a pipe flow are focused at a certain radial position which is called equilibrium position or pinch point. In this study, the effects of the size of microorganism and Reynolds number in the range of 1 < Re < 78 on the inertial migration were investigated and the results are compared with those for solid particles under similar experimental conditions. As a result, the equilibrium position for the elastic microorganisms is not so distinct, compared to the solid particles. This results from deformation of elastic body shape caused by shear-gradient of surrounding flow.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.56-59
• /
• 2003

This paper presents new interpolation algorithm for measuring high resolution position information which is propered to nano servo control motor using analog quadrature encoder. In the past, there is a large memory and two high price A/D converter for high resolution analog quadrature encoder interpolation. but this paper show that it can make high resolution interpolate using small memory, one A/D converter and comparator. Experimental results show that the proposed algorithm for high resolution position is useful.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.396-399
• /
• 2008

Kalman Filter is an efficient recursive filter that estimates the state of a dynamic system from a series of incomplete and noisy measurement. The filter is very powerful in the field of autonomous and assisted navigation. In this paper, we carry out comparative stduy to validate the performance of the application of Kalman Filter. We will build personal localization system based on Cricket mote, our system can present the real-time position of person when the man with PDA moves around. The proposed system is composed of cricket sensor networks, PDA and host computer. There is one listener attached to the PDA. The PDA will get the distance data from the listener synchronously. It will calculate the position of the person in the coordinate of the Cricket system with the trilateration method. Furthermore, it sends the real-time position information to the host computer by Bluetooth. The host computer will use Kalman Filter to process data and get the final estimated track of the person.