• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• International Journal of Automotive Technology
• /
• v.5 no.4
• /
• pp.221-238
• /
• 2004

Wall interactions of direct injection spray were investigated using laser-sheet imaging, shadowgraphy, wetted footprint and phase Doppler interferometry techniques. A narrow-cone high-pressure swirl injector is used to inject iso-octane fuel onto a plate, which has three different impact angles inside a pressurized chamber. Heated air and plate conditions were compared with unheated cases. Injection interval was also varied in the heated case to compare dry- and wet- wall impingement behaviors. High-speed macroscopic Mie-scattering images showed that presence of wall and air temperature has only minor effect on the bulk spray structure and penetration speed for the narrow-cone injector tested. The overall bulk motions of the spray plume and its spatial position at a given time are basically unaffected until a few millimeters before impacting the wall. The surface properties of the impact surface, such as the temperature, the presence of a preexisting liquid film also have a small effect on the amount of wetting or the wetted footprint; however, they have strong influence on what occurs just after impact or after a film is formed. The shadowgraph in particular shows that the plate temperature has a significant effect on vapor phase propagation. Generally, 10-20% faster horizontal vapor phase propagation is observed along the wall at elevated temperature condition. For impingement onto a preexisting film, more splash and evaporation were also observed. Contrary to some preconceptions, there is no significant splashing and droplet rebounding from surfaces that are interposed in the path of the DI gasoline spray, especially for the oblique impact angle cases. There also appears to be a dense spray front consists of large sac spray droplets in the oblique impact angle cases. The bulk of the spray is not impacted on the surface, but rather is deflected by it The microscopic details as depicted by phase Doppler measurements show that the outcome of the droplet impaction events can be significantly influenced. Only droplets at the spray front have high enough Weber numbers for wall impact to wet, splash or rebound. Using the sign of vertical velocity, the time-resolved downward droplets and upward droplets are compared. The Weber number of upward moving droplets, which seldom exceeds unity, also decreases as the impact angle decreases, as the droplets tend to impact less and move along the wall in the deflected spray plume.

• The KIPS Transactions:PartC
• /
• v.16C no.4
• /
• pp.449-460
• /
• 2009

The signature hashing algorithm[9] provides the fast pattern matching speed for network IPS(Intrusion Prevention System) using the hash table. It selects 2 bytes from all signature rules and links to the hash table by the hash value. It has an advantage of performance improvement because it reduces the number of inspecting rules in the pattern matching. However it has a disadvantage of performance drop if the number of rules with the same hash value increases when the number of rules are large and the corelation among rules is strong. In this paper, we propose a method to make all rules distributed evenly to the hash table independent of the number of rules and corelation among rules for overcoming the disadvantage of the signature hashing algorithm. In the proposed method, it checks whether or not there is an already assigned rule linked to the same hash value before a new rule is linked to a hash value in the hash table. If there is no assigned rule, the new rule is linked to the hash value. Otherwise, the proposed method recalculate a hash value to put it in other position. We implemented the proposed method in a PC with a Linux module and performed experiments using Iperf as a network performance measurement tool. The signature hashing method shows performance drop if the number of rules with the same hash value increases when the number of rules are large and the corelation among rules is strong, but the proposed method shows no performance drop independent of the number of rules and corelation among rules.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.60-69
• /
• 2010

For treatment of Total Skin Electron beam Therapy (TSET), measurement of dose at various conditions is need on the contrary to usual radiotherapy. When treating TSET with modified Stanford technique based on linear accelerator, the energy of treatment electron beam, the spatial dose distribution and the actual doses deposited on the surface of the patient were measured by using EBT2. The measured energy of the electron beam was agreed with the value that measured by ionization chamber, and the spatial dose distribution at the patient position and the doses at several point on the patient's skin could be easily measured by EBT2 film. The dose on the patient that was measured by EBT2 film showed good agreement with the data measured simultaneously by TLD. With the results of this study, it was proven that the EBT2 film can be one of the useful dosimeter for TSET.

• Progress in Medical Physics
• /
• v.29 no.1
• /
• pp.8-15
• /
• 2018

This work reports the acceptance testing and commissioning experience of the Robotic Intensity-Modulated Radiation Therapy (IMRT) M6 system with a newly released $InCise^{TM}2$ Multileaf Collimator (MLC) installed at the Yonsei Cancer Center. Acceptance testing included a mechanical interdigitation test, leaf positional accuracy, leakage check, and End-to-End (E2E) tests. Beam data measurements included tissue-phantom ratios (TPRs), off-center ratios (OCRs), output factors collected at 11 field sizes (the smallest field size was $7.6mm{\times}7.7mm$ and largest field size was $115.0mm{\times}100.1mm$ at 800 mm source-to-axis distance), and open beam profiles. The beam model was verified by checking patient-specific quality assurance (QA) in four fiducial-inserted phantoms, using 10 intracranial and extracranial patient plans. All measurements for acceptance testing satisfied manufacturing specifications. Mean leaf position offsets using the Garden Fence test were found to be $0.01{\pm}0.06mm$ and $0.07{\pm}0.05mm$ for X1 and X2 leaf banks, respectively. Maximum and average leaf leakages were 0.20% and 0.18%, respectively. E2E tests for five tracking modes showed 0.26 mm (6D Skull), 0.3 mm (Fiducial), 0.26 mm (Xsight Spine), 0.62 mm (Xsight Lung), and 0.6 mm (Synchrony). TPRs, OCRs, output factors, and open beams measured under various conditions agreed with composite data provided from the manufacturer to within 2%. Patient-specific QA results were evaluated in two ways. Point dose measurements with an ion chamber were all within the 5% absolute-dose agreement, and relative-dose measurements using an array ion chamber detector all satisfied the 3%/3 mm gamma criterion for more than 90% of the measurement points. The Robotic IMRT M6 system equipped with the $InCise^{TM}2$ MLC was proven to be accurate and reliable.

• Investigative Magnetic Resonance Imaging
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2004

Purpose : Information about electrical activity inside the brain during fMRl scans is very useful in monitoring physiological function of the patient or locating the spatial position of the activated region in the brain. However, many additional noises appear in the EEG signal acquired during the MRI scan. Gradient induced noise is the biggest one among the noises. In this work, we propose a gradient noise reduction method using the independent component analysis (ICA) method. Materials and Methods : We used a 29-channel MR-compatible EEG measurement system and a 3.0 Tesla MRI system. We measured EEG signals on a subject lying inside the magnet during EPI scans. We selectively removed the gradient noise from the measured EEG signal using the ICA method. We compared the results with the ones obtained with conventional averaging method and PCA method. Results : All the noise reduction methods including the averaging and PCA methods were effective in removing the noise in some extent. However, the proposed ICA method was found to be superior to the other methods. Conclusion : Gradient noise in EEG signals acquired during fMRI scans can be effectively reduced by the ICA method. The noise-reduced EEG signal can be used in fMRI studies of epileptic patients or combinatory studies of fMRI and EEG.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.595-602
• /
• 1998

Among the apex locators, the frequency dependent type is more accurate and convenient to use than others, But the accuracy of the apex locator is still influenced by the presence of various electrolytes used in root canal treatments. In this study, we have developed a frequency dependent electronic apex locator minimizing the influence of the electrolytes on the measurement of root canal lengths. It was also confirmed that two frequencies of 500Hz and 100kHz are optimal for the measuring impedance compare with commercial product used(400Hz and 8kHz)a and there were no differences in accuracy among the three different types of the waveforms; sinusoidal, triangular, and rectangular waves(p>0.05). Impedance ratio of the two different frequencies represents the position of the file in root canal, and the voltage difference of two signals represents the status of the fluid in the root canal. As a result of compensation using the voltage differences, the errors were decreased on the average from +0.54mm to +0.18mm in $H_2O_2$ solution (p<0.01), and from -0.33mm to -0.01mm in NaOCl solution(p<0.01). The accuracies based on ${\pm}$0.5mm, in $H_2O_2$ and NaOCl solutions were improved with the automatic compensation from 71.1% and 91.1% to 82.2% and 100% respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2005

Multi-beam echo sounder is more precise and efficient than single beam echo sounder relatively because it is able to survey a wide area with 3 times or 4 times swath width as much as the depth of water using multi-beam echo sounder. It is sure to be needed to control supplementary equipment accurately, however, because the principle of creation and measurement of the beam is elaborate and influenced a great deal by vessel's motion. We analyzed using visual and statistical methods in both sections of the depth of water where were the places of the center of the beam and ± 45° angles from the central beam to improve the precise of Multi-beam echo sounder in this study. In result, it was required to control supplementary equipment because of errors from the vibration of an inertia governor and misalignment of extra units. Therefore, we reduced the vibration from the vessel's engine by sticking rubbers to the inertia governor and measured the offset values of extra units accurately, converted them to the values of horizontal position and lined up. In result, the precise in sounding the depth at the place of ± 45° from the center of the beam was improved from the level of the 1st order to the special order in a hydrographic survey of the IHO S44 standards and a phenomenon of ripple patterns in the overlapped area by misalignment was decreased remarkably.

• Journal of Yeungnam Medical Science
• /
• v.13 no.1
• /
• pp.22-31
• /
• 1996

It is difficult to get a satisfactory result for the correction of malunited fracture of zygoma. Triple osteotomy and reposition of malunited zygoma is accepted as the better surgical method than camouflage surgery by means of onlays, if the orbital floor is to be reconstructed. The surgical approach can be divided into bicoronal, periorbital, intraoral and old scar. In 7 patients with malunited fracture of zygoma, the authors used a limited approach through extension of periorbital incision and intraoral incision instead of wide exposure including bicoronal incision. And we performed triple osteotomy and advancement of zygoma complex. The patients were followed for 4.5 months with acceptable result, and this approach was an effective method for the relatively simple tripod type-malunited fracture of zygoma. The authors obtained following conclusions: 1. Preoperative evaluation through thorough measurement of X-rays, investigation of photographs and detail communication with the patients was an important process. 2. Through lateral extension of subciliary incision, lateral eyebrow and intraoral incision, we could obtain adequate exposure for triple osteotomy and advancement of zygoma. 3. The zygoma should be reduced and fixed in an overcorrected superior and medial direction. 4. Return of zygoma to its anatomical position was possible only when it is completely freed from the surrounding soft tissue including masseter. 5. We could not find any different results between autogenous calvareal bone graft and $Medpor^{(R)}$ insertion on the floor of orbit.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.59-70
• /
• 2016

Purpose - The objectives of this study are described as following. First, the study will establish the concept of Brand Values of Environmentally-friendly agricultural product through theoretical discussion. Second, it shows the effects of Environmentally-Friendly Agricultural Products brand value on Brand Satisfaction, Brand Trust and Brand Loyalty by empirical investigation. Third, in order to provide the methodology of brand development, literature regarding and questionnaire survey were used such as Environmentally-Friendly Agricultural Products Brand Value, Brand Satisfaction, Brand Trust and Brand Loyalty. Based up on the results, the research estimates consumers' relative priorities of Environmentally-Friendly Agricultural Products Brand Value factors in purchase. This research also suggests the consumer oriented new brand development and the progressive direction for the successful launching of Korean Environmentally-Friendly Agricultural Products Brand. Research design, data, and methodology - Because the relative literatures reviewed regarding not only each factor but also the relationships among them, Brand Value was categorized into 4 dimensions: Emotional, Social, Functional, and Epistemic Value. Then, Brand Loyalty was added as an outcome variable and Brand Satisfaction, Brand Trust were also added as mediators. The proposed research model and 13 hypotheses were created and 23 measurement items were developed. A face-to-face questionnaire survey with items concerning the Brand Value of Environmentally-Friendly Agricultural Products is conducted to housewives in metropolitan area in May 2016. Respondent answered about Brand Value, Brand Satisfaction, Brand Trust and Brand Loyalty in preferred Environmentally-Friendly Agricultural Products. 333 copies of the questionnaire were collected and analyzed using SPSS 21.0 and AMOS 20.0 to determine the reliability and validity of the measurements. Results - From the confirmatory factor analysis and a structural equation modeling, the outcomes of these studies were as follows; (1) Three Brand value dimensions, i.e. Emotional Value, Social Value, and Epistemic Value had a significant and positive impact on Brand Satisfaction, but Functional Value did not. (2) Social Value also had an impact on Brand Trust, (3) Brand Satisfaction significantly affected Brand Trust, and Brand Trust influenced on Brand Loyalty, and (4) Brand Satisfaction were perfectly effective in mediation between Emotional Value, Epistemic Value and Brand Trust, and it also partially mediated between Social Value and Brand Trust. Conclusions - According to the result of consumer research on Environmentally-Friendly Agricultural Product brand, 3 dimensions of brand value affected brand satisfaction, and especially Social Value was a significant positive dimension. So, marketers should concern about value proposition of Environmentally-Friendly Agricultural Product to consumers by using premium package design, store identity, and distinctive product. Consumers wanted to get self-esteem, self-regard, and high social position by purchasing it. This study has academic and practical significance, so the findings can be applied to a wide range of brand management strategies. However, there are some limitations; 1) limitation about development of new brand value dimensions, 2) limitation about gender in the area of respondents. Future research should be done with wide range of respondents.