• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.239-242
• /
• 2003

In this paper, we propose how to determine the optimal camera position using inverse kinematics of virtual link model and manipulability measure. We model the variable distance and viewing direction between a target object and a camera position as a virtual link. And, by using inverse kinematics of virtual link model, we find out regions that satisfy the direction and distance constraints for the observation of target object. The solution of inverse kinematics of virtual link model simultaneously satisfies camera accessibility as well as a direction and distance constraints. And we use a manipulability measure of active camera system in order to determine an optimal camera position among the multiple solutions of inverse kinematics. By using the inverse kinematics of virtual link model and manipulability measure, the optimal camera position in order to observe a target object can be determined easily and rapidly.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2009-2017
• /
• 2015

The E-Core Transverse Flux Machine is a different design of transverse flux machines combined with reluctance principle. Determination of the rotor position is important for the movement of the ETFM by switching the phase currents in synchronism with the inductance regions of the stator windings. It is the first time that rotor position estimation based on Artificial Neural Network (ANN) is purposed to eliminate the position sensor for the ETFM. Simulation and experimental tests are demonstrated for the feasibility of the proposed estimation algorithm for the exercise bike application of the ETFM.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.672-675
• /
• 1994

This paper presents a new algorithm to determine the receiver position in satellite navigation for GPS(Global Positioning System). The algorithm which based on vector analysis is able to obtain simultaneously the receiver position and the direction vector which is from the receiver position to a satellite. In its first calculation stage it, does riot require the complex initial value which is used in the previous works and affects the accuracy of the observed receiver position. Furthermore, the algorithm tells us whether a selected configuration among the visible satellites is good or poor for the accuracy. Comparing the algorithm with the previous method, the effectiveness of the algorithm is verified through the experimental simulations.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.104-113
• /
• 1996

In robot system, the robot manipulation needs the information of task and objects to be handled in possessing a variaty of positions and orientations. In the current industrial robot system, determining position and orientation of objects under industrial environments is one of major problems. In order to pick up an object, the roblt needs the information about the position and orientation of object, and between objects and gripper. When sensing is accomplished by pinhole model camera, the mathematical relationship between object points and their images is expressed in terms of perspective, i.e., central projection. In this paper, a new approach to determine the information of the supporting points related to position and orientation of the object using the robot vision system is developed and testified in experimental setup. The result will be useful for the industrial, agricultural, and autonomous robot.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.113-118
• /
• 2017

In this paper, we propose a design procedure for determining the gate position robust to changes and inherent fluctuations in the process conditions during injection molding. To evaluate the robustness of the gate position, the signal-to-noise ratio is used, and noise conditions are implemented using orthogonal arrays, where the process variables are considered as noise factors and possible process fluctuations are set as the levels of the noise factors. To show the usefulness of the proposed robust design procedure, we apply it to a computer CPU baseplate. As a result, it is shown that a robust gate position can be determined that reduces the average warpage deflection by 2.4% and 1.7%, and the variance by 3.4% and 5.1%, compared to the two initial gate positions.

• 전자공학회논문지
• /
• 제52권3호
• /
• pp.13-18
• /
• 2015

본 논문은 GNSS의 문제점인 위치오차와 실외음영지역을 해소하기 위하여 GNSS와 vision system을 융합한 신뢰성있는 고정밀 측위와 최적의 vision system을 분석하였다. 위치결정을 위해서는 최소 4개 이상의 GNSS로부터 신호를 수신 받아야 한다. 그러나 도심지역에서는 고층건물이나 장애물 또는 반사파에 의해 정확한 위치가 어렵다. 이러한 문제점을 해결하기 위하여 vision system을 이용한다. GNSS를 사용하기 열악한 도심지역의 target object에 정확한 위치 값을 결정해 놓는다. 그리고 vision system을 이용해 target object를 인식하고, 인식된 target object를 이용하여 위치오차를 보정해 준다. 이동체는 이동 중 vision system을 이용하여 target object를 인식하여 위치 데이터 값을 만들어내고, 위치 계산을 수정하여 안정되고 신뢰성 있는 고정밀 측위를 할 수 있다.

• 자원환경지질
• /
• 제22권2호
• /
• pp.167-171
• /
• 1989

Palaeomagnetic studies accompany calculation and plotting of pole position. This paper explains three graphical methods for the determination of pole position and plotting problem. It also derives the numerical formula for pole calculation and explains the method how the pole plotted on the rear hemisphere can be transformed to the frontal hemisphere, which is not clarified elsewhere.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1088-1094
• /
• 1993

One of the important restraint conditions for determination of rotary tiller parameters is whether the outside of front cutting surface on blade in rotary tiller pushes untilled soil in operation. By theoretical analysis and graphic verification on computer, no sil-push conditions is put forward and formula for calculating the position angle of its bent line derived, as is convenient for selection of rotary tiller parameters and design and drawing of its blade.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1165-1171
• /
• 2004

The free vibration analyses of the isotropic and CFRP laminated composite rectangular plates with point supports at the fix edge is performed by FEM. We showed optimal position and mode shape of point supports that maximized fundamental natural frequency of the isotropic and CFRP laminated composite rectangular plates by each aspect ratio and the number of point supports.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.91-98
• /
• 1994

Most of machines are physically or chemically degenerated by continuous usage. There- fore, a preventive maintenance is necessary. Producing defects are caused by process shift in mean and variance which are due to three types of degeneration. We develope the function of process variance from the experimental data and determine the optimal tool wear limit and the initial setting position of tool by considering the percent defective cost and the preventive maintenance cost.