• 반도체디스플레이기술학회지
• /
• 제12권1호
• /
• pp.53-59
• /
• 2013

Chip mounter which is used to pick chips from the pre-specified position and place them on the target location of PCB is an essential device in semiconductor and LCD industries. Quick and high precision positioning is the key technology needed to increase productivity of chip mounters. As increasing acceleration and deceleration of placing motion, structural vibration induced from inertial reactive force and flexibility of mounter structure becomes a serious problem degrading positioning accuracy. Motivated from these, this paper proposed a new control design algorithm which combines a mounter structure acceleration feedforward compensation and an extended sliding mode control for fine positioning and suppression of structural vibration, simultaneously. The feasibility of the proposed control design was verified along with some simulation results.

• 동력기계공학회지
• /
• 제8권4호
• /
• pp.17-23
• /
• 2004

A delivery ship is used to handle the cargo with the crane to/from the ships. The ship is inclined in the direction of a cargo which is hung on a crane. In this case, a arc shaped rail should be in the equilibrium state to get good anti rolling performance. In this study, a device and control algorithm are developed to take accurate and quick equilibrium of the rail. The device is composed of a hinged immovable support and two screw jacks. And the control algorithm demands two controllers. One controller is designed such that the screw jack 1 and 2 follow the position reference signal generated by a tilt sensor. The other controller of two degree of freedom is designed to remove the synchronous error occurred between jack 1 and jack 2. The simulation results show that the desirable control performance is achieved.

• International Journal of Safety
• /
• 제5권2호
• /
• pp.6-11
• /
• 2006

The time delay in servo control on LonWorks/IP Virtual Device Network (VDN) is highly stochastic in nature. LonWorks/IP VDN induced time delay deteriorates the performance and stability of the real-time distributed control system and hinders an effective preventive and predictive maintenance. Especially in real-time distributed servo applications on the factory floor, timely response is essential for predictive and preventive maintenance. In order to guarantee the stability and performance of the system for effective preventive and predictive maintenance, LonWorks/IP VDN induced time delay needs to be predicted and compensated for. In this paper position control simulation of DC servo motor using Zero Phase Error Tracking Controller (ZPETC) as a feedforward controller, and Internal Model Controllers (IMC) based on Smith predictor with disturbance observer as a feedback controller is performed. The validity of the proposed control scheme is demonstrated by comparing the IMC based on Smith predictor with disturbance observer.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1154-1164
• /
• 2015

This paper proposes a fully sensorless driver for a permanent magnet synchronous motor (PMSM) integrated with a digital motor controller and an analog pre-driver, including sensing circuits and estimators. In the motor controller, a position estimator estimates the back electromotive force and rotor position using a sliding-mode observer. In the pre-driver, drivers for the power devices are designed with a level shifter and isolation technique. In addition, a current sensing circuit measures a three-phase current. All of these circuits are integrated in a single chip such that the driver achieves control of the speed with high accuracy. Using an IC fabricated using a $0.18{\mu}m$ BCDMOS process, the performance was verified experimentally. The driver showed stable operation in spite of the variation in speed and load, a similar efficiency near 1% compared to a commercial driver, a low speed error of about 0.1%, and therefore good performance for the PMSM drive.

• 전력전자학회논문지
• /
• 제7권3호
• /
• pp.253-261
• /
• 2002

본 논문에서는 TMS320F240 DSP를 통해 제어되는 디지털 히스테리시스 제어기를 사용한 Switched Reluctance Motor(SRM)의 위치제어시스템을 제안하였다. SRM은 구조가 간단하고 효율이 놀지만 전동기 구동 특성상 전력용 반도체 소자를 이용한 구동 시스템이 필수적이기 때문에 일반 전동기 제어시스템에 비해 전체 시스템의 제작비용이 증가하게 된다. 이러한 단점을 극복하고 SRM의 활용성을 높이기 위해서는 제어용 드라이브가 필수적으로 요구되는 서보시스템으로서와 SRM 제어시스템을 개발하는 것이다. 따라서 본 연구에서는 시스템 개발과 구현에 있어 아날로그 히스테리시스 제어기를 사용할 경우 하드웨어적인 방법에 의한 파라메타 수정 및 제작의 문제점을 해결하고 전체적인 시스템의 개발단가를 낮추기 위해 DSP내에서의 연산을 통해 제어되는 디지털 히스테리시스 제어기를 설계하여 SRM의 위치제어 시스템을 구현하였으며, 실헐을 통해 제어 및 응답특성을 고찰함으초써 서보 구동 시스템으로서의 SRM의 이용 가능성을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1369-1379
• /
• 2001

This paper focuses on a development of a sensor system measuring locations of a vehicle to localize a mobile robot while it tracks on the track (location sensor) . Also it focuses on a system configuration identifying the vehicle's orientation and distance from the object while it is stationary at certain station (position sensor) . As for the location sensor it consists of a set of sensors with a combined guiding and counting sensor, and an address-coded sensor to localize the vehicle while moving on the rail. For the position sensor a PSD (Position Sensitive Device) sensor with photo-switches sensor to measure the offset and orientation of the vehicle at each station is introduced. Both sensor systems are integrated with a microprocessor as a data relay to the main computer controlling the vehicle. The location sensor system is developed and its performance for a mobile robot is verified by experiments. The position measuring system is proposed and is robust to the environmental variation. Moreover, the two kinds of sensor systems guarantee a low cost application and high reliability.

• 한국항해학회지
• /
• 제14권4호
• /
• pp.41-52
• /
• 1990

부유식 진동수주형 파력발전기는 불규칙한 해상 상태에서의 작동으로 인하여 흡수효율의 저하를 필수적으로 수반한다. 본 논문에서는 입사파의 에너지를 적절히 흡수할 수 있는 파력발전기를 초기설계하여 모델로 이용하였으며, 이 모델의 유체력추정에는 3차원 특이점 분포법을 사용하였다. 그리고, 가변구조 시스템으로 알려진 슬라이딩 모드기법을 이용하여 파의 상태 변화에 따른 파력발전기의 자세와 위치를 제어함으로써 흡수파력의 효율을 중대시킬 수 있는 시스템을 제안하고 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1142-1146
• /
• 2004

The ultra precision linear stage is an essential device in the fields of MEMS and Bio technology. A piezo electric motor is widely used for its better linear characteristics, faster response time, and smaller size than conventional electro-magnetic actuator. We develop a new inchworm type motor to implement an actuator-integrated a long stroke linear stage which can move fast. To implement a servo system, we use a heterodyne interferometer as a position sensor, and we propose a new measurement technique using I/Q demodulator, and we propose a counting method to measure the position of fast moving object with low cost circuitry. The characteristics of the actuator and servo system are evaluated by measuring its displacement with a commercial laser interferometer.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.219-223
• /
• 2004

Since rotor position information is necessary to drive the SRM, absolute-encoder, resolver and incremental encoder is used to detect a rotor position. But, it is not desirable to use a high price encoder and microprocessor under the condition of the simple driving system when precision control is not demanded. In this paper, only using the reflective type two photo-sensors replaces the conventional opto-interrupter and slotted-disk, which not only remove a slotted-disk section but drive three-phase 6/4 pole SRM bidirectionally, Therefore, control circuit can compose common analog device with low price.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.422-425
• /
• 2002

Position balance control refers to ability that is kept bodily center of gravity under minimum position shake on surface of land. Patients who an injury of brain, a wound of the central nervous system or weakening of leg muscular power is fallen are trend increasing steadily by the car accident body balance function is on an increasing trended. These patients have difficulty in position balance control, receive big restriction walk and life style. This research composed to do body balance function rehabilitation training which elevate leg muscular power using step machine. And expect to become effective rehabilitation training device because measuring bodily pressure center using Force Platform and do so that can confirm training result easily as that is monitor.