• 전기학회논문지
• /
• 제68권3호
• /
• pp.480-488
• /
• 2019

In this paper, we propose an obstacle avoidance system for an unmanned ship to navigate safely in dynamic environments. Also, in this paper, one-dimensional low-cost lidar sensor is used, and a servo motor is used to implement the lidar sensor in a two-dimensional space. The distance and direction of an obstacle are measured through the two-dimensional lidar sensor. The unmanned ship is controlled by the application at a Tablet PC. The user inputs the coordinates of the destination in Google maps. Then the position of the unmanned ship is compared with the position of the destination through GPS and a geomagnetic sensor. If the unmanned ship finds obstacles while moving to its destination, it avoids obstacles through a fuzzy control-based algorithm. The paper shows that the experimental results can effectively construct an obstacle avoidance system for an unmanned ship with a low-cost LiDAR sensor using fuzzy control.

• 한국항공우주학회지
• /
• 제45권4호
• /
• pp.328-341
• /
• 2017

발사체의 추력벡터제어를 위한 구동장치시스템에서 관성부하를 갖는 전기기계식 위치서보 시스템의 공진 특성과 유연한 기체구조체 지지부의 구조공진이 결합되어 합성공진이 발생한다. 이렇게 발생한 공진은 발사체의 자세제어시스템에 되먹임되어 자세안정성에 영향을 줄 수 있다. 본 논문에서는 발사체의 추력벡터제어를 위한 직구동 방식의 전기기계식 구동장치의 합성공진을 해석하기 위한 모델을 소개하고 합성공진 현상을 저감하여 구동기의 동특성을 개선하는 동적 하중 되먹임 제어기법의 해석 및 시험 결과를 기술하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1327-1330
• /
• 2004

An underwater robotic system has been developed and applied to visual inspection of reactor vessel internals. The Korea Electric Power Robot for Visual Test (KeproVt) consists of an underwater robot, a vision processor-based measuring unit, a master control station and a servo control station. The robot guided by the control station with the measuring unit can be controlled to have any motion at any position in the reactor vessel with $\pm$1 cm positioning and $\pm$2 degrees heading accuracies with enough precision to inspect reactor internals. A simple and fast installation process is emphasized in the developed system. The developed robotic system was successfully deployed at the Younggwang Nuclear Unit 1 for the visual inspection of reactor internals.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.616-621
• /
• 1989

This paper describes newly developed high performance control system for vector controlled induction motor. In order to realize this system, the authors are adopted the current controlled PWM inverter with hysteresis controller. A priori knowledge of the motor parameters is need in order to implement indirect vector control on induction motor drive systems where the position of rotor flux is estimated. This paper presents some of the relevant mathematics necessary to study parameter sensitivity in induction motor servo system. Simulation results demonstrate the predicted performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.121.2-121
• /
• 2001

Many of today´s robot are required to perform tasks which demand a high level of accuracy in end-effector positioning. Those rigid robots are very inefficient and slow because its have large and heavy links, In an attempt to solve these problems, a robots using flexible beam were created. But the single-link flexible beam is infinite-dimensional system. Many researchers have proposed controlling such a beam an approximated model consisting of a finite a number of models. In this paper, we start by deriving the analytic model for the dynamics of general single-link beam, and a controller is designed for flexible beam with integral type servo system bases of the linear matrix inequality (LM) technique. To the end, simulation results show that a designed controller guarantees affective vibration control the single-link flexible beam.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.504-510
• /
• 1991

SAMSUNG Electronics has developed a SCAR.A robot system, SM3, which is applicable to several assembly, inspection, and adjustment tasks. This robot system drives by AC servo motors has attained a .theta.1 and .theta.2 axis maximum composite speed of 5.4 m/sec, a repeatability of .+-.05 mm, and a cycle time of 1.2 sea. The robot controller based on three 8086 and one 8087 processors consists of the main controller, the joint position controller, and the motor controller. The robot controller has plentiful self-diagnosis and control capabilities, and can be interfaced to other external device. The robot language FARAL Is designed such that every task is easily programmed. In this paper, the main features of the body, controller, and FARAL of SM3 will be described. In particular, the control method designed for a stable and fast robot motion will be explained. Finally, the future development will be addressed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2415-2417
• /
• 2002

In this paper, we discuss about the real-time distributed system for the control of to motors using uCOS-II kernel. Real-time kernel needs to process the tasks for two motors in desired time to synchronize motion. We used both semaphore and message mail box for synchronization. In the previous study, we used step motors for the actuator of two axes robot, but could not draw a clear line because of motor resolution and synchronizing step pulse. To resolve the problem we rebuilt the transfer robot with DC motors and the dedicated position servor which had built in out lab. Moreover we developed the PC based graphic user interface for generating planar drawing image control. Experimental results also presented to show the proposed control system is useful.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.256-259
• /
• 1987

In this paper, a servo controller for a robot manipulator is developed. It consists of a conventional MRAS controller for each joint together with a feedback control to Dynamics compensation. To generale the control torque effectively a currant drive method is adopted. The speed of the actuator is measured by using a tachometer and the position of the link is measured by using a potentiometer. To show the effectiveness of the proposed control algorithm the proposed controller is tested in real time.

• 전자공학회논문지 IE
• /
• 제43권4호
• /
• pp.28-36
• /
• 2006

본 연구에서는, 팔의 4가지 운동을 구별할 수 있는 계측 시스템과, 구별된 팔의 운동 위치를 추정할 수 있는 제어 알고리즘에 관하여 기술한다. 먼저 4가지(굽히기와 펴기, 내전과 외전) 운동을 구별하기 위해 굽혀진 정도를 측정할 수 있는 전기 저항 형태의 굽힘 센서를 사용한다. 이 센서를 왼팔의 상완 이두근과 오구완근에 1개씩 부착한다. 부착된 두 개의 센서로부터 출력되는 신호는 증폭기와 필터 등으로 구성된 계측 시스템을 통과한다. 이 시스템에서는 상완이두근에 부착된 센서 신호는 굽히기와 펴기 운동 중에서만 On/OFF 작동을 하도록 하고, 오구완근에 부착된 센서 신호는 모든 운동에 작동하도록 설계하였다. 이렇게 출력된 신호들로부터 4가지 운동은 구별하여 출력하고, 출력된 신호들로부터 팔의 운동 위치를 측정한다. 마지막으로, 제안된 알고리즘의 효용성을 입증하기 위해 RC 서보 모터와 포텐션미터로 구성된 2자유도의 인공팔을 제작하여 실험한다. 실험을 통해 인공 팔의 위치는 모터의 회전 관성, 센서의 노이즈 등으로 실제 팔의 위치와 차이가 발생하였다 이 오차를 감소하기 위해 오차값과 오차의 변화값에 근거한 퍼지 PID 제어기를 사용하였고, 이로써 오차가 5도 이내로 감소되었다.

• 제어로봇시스템학회논문지
• /
• 제6권3호
• /
• pp.241-247
• /
• 2000

The reference model of an MRC (model reference control) provides the desired trajectory a plant should follow and thus the design of a reference model has a significant effect on control performance. In most control systems control input to a plant has some bounds and it is preferable to make use of as large control inputs as possible within the range of no saturation. In this paper a new approach of selecting the reference model is proposed for bounded control inputs. Design variables of the reference model are determined in such a way that maximizes the performance index within the range of no saturation. Moreover this variable reference model is regularly updated during control. This scheme is verified by application to the servo motor position control system in various simulations. The responses of the MRC with a variable reference model show better tracking performance than that with a fixed reference mode. Moreover by adjusting the update interval of the reference model the control performance can be further improved.