• 전기학회논문지
• /
• 제59권10호
• /
• pp.1809-1815
• /
• 2010

This paper presents an improved method for high-resolution rotor position estimation in the permanent magnet synchronous motor (PMSM) drives with low-resolution Hall-effect sensors. The proposed method adopts a gain-scheduled full-order speed observer. Since the quantized position signal, which is obtained from Hall-effect sensors, is basically used as the input of the observer, the sixth-order harmonics are essentially included in the estimated position. To eliminate the harmonic components, the quantized position is linearized by a linear extrapolation based on the estimated average speed and futhermore the speed-depentent observer gain scheduling strategy is developed. The observer gain is also scheduled by considering the motor acceleration to improve the dynamic performance according to the changes of the motor speed and load. Several experiments are performed for 800W PMSM drive and the results demonstrate the effectiveness of the proposed method.

• 전력전자학회논문지
• /
• 제9권5호
• /
• pp.485-490
• /
• 2004

본 논문에서는 나노급 서보 전동기의 초정밀 위치제어를 위한 위치정보를 얻기 위하여 정현파 엔코더에 적용하기 위한 새로운 위치 보간 알고리즘에 대하여 기술한다. 기존의 정현파 엔코더에서 사인 및 코사인 파형에서 정밀위치정보를 얻기 위하여 대용량의 메모리와 빠른 변환속도를 갖는 2개의 A/D를 이용하였다. 그러나 제안된 보간 방법을 이용할 경우에는 적은 용량의 메모리와 단지 하나의 A/D와 비교기만을 이용하여 정현파 엔코더에서 정밀위치정보를 얻을 수 있다. 초정밀 제어를 위한 제안된 알고리즘의 유용성은 실험결과로부터 알 수 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.114-115
• /
• 2014

This paper proposes a new speed and position estimation method for PMSM(Permanent Magnet Synchronous Motor) using low-resolution hall-effect sensors. In general, there are a variety of sensors to estimate rotor position for PMSM such as resolvers, and encoders. Position detection using hall-effect sensors that detect the flux of the rotor for rotor position is excellent method in terms of cost and space, but has low-resolution. To overcome this problem, this paper proposes a new speed and position estimation observer. The performance of the observer has been verified by simulations carried out using Matlab/Simulink.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.709-716
• /
• 2010

MDPS (motor driven power steering) systems have been widely used in vehicles due to their improved fuel efficiency and steering performance when compared to conventional hydraulic steering. However, the reduction of torque ripples and material cost are important issues. A low resolution position sensor for MDPS is one of the candidates for reducing the material costs. However, it may increases the torque ripple due to the current harmonics caused by low resolution encoder signals. In this paper, the torque ripple caused by the quantized rotor position of the low resolution encoder is analyzed. To reduce the torque ripples caused by the quantization of the encoder signals, the rotor position and the speed are estimated by measuring the frequency of the encoder signals. In addition, the compensating q-axis current is added to the current command so that the 6th order torque harmonic is attenuated. The reduction of torque ripples by applying the estimated rotor position and the compensated q-axis current is verified through experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.806-807
• /
• 2011

This paper presents a new sensorless controller used with both the classical sliding mode observer(SMO) and the rate of current change in order to a reduced torque ripple for switched reluctance motor (SRM) sensorless drives. The new sensorless scheme consists of a sliding mode observer (SMO)-based position sensorless approach for high speeds along with a low-resolution discrete the rate of current change for low speeds and standstill. The new position estimation resets between the SMO and the low-resolution of current change according to the speed sign and the position error difference between the SMO and the low-resolution rate of current change. The simulation results show the robustness of this new high performance sensorless control approach with the hybrid sensorless control topology.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1366-1370
• /
• 2010

This paper supposes the vector control algorithm to estimate the rotor position of permanent magnet synchronous traction motor using the hall-effect sensor. The hall-effect provides 60 electrical degrees resolution in rotor position sensing and it is very low resolution. The algorithm makes resolution high as optical encoders or electromagnetic resolver. If necessary, the reference rotor position angle is controlled by adjusting the variable. When a rotor position sensor such as either a optical encoder or a electromagnetic resolver is misalignment, it is useful to align with those. The method on adjusting the reference rotor position angle can compensate for misalignment error degrees by 60 electrical degrees.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.575-580
• /
• 2020

We have developed a position-sensitive Parallel Plate Avalanche Counter (PPAC) to detect the fission fragments and reconstruct the fission reaction plane in the experiment of studying nuclear equation of state (nEOS) by means of heavy ion collision (HIC). This experiment put forward high requirements for the performances of PPAC, such as the time resolution, efficiency and position resolution. According to these requirements we designed the PPAC with an active area of 240 mm × 280 mm working at low gas pressure. The results show that time resolution could be less than 300 ps. Position resolution is consistent with the theoretical calculation about 1.35 mm. Detection efficiency could be approaching 100% gradually with the voltage increasing in different gas pressures. The performances of PPAC have also been verified in beam experiment. Each set of anode wires can be accurately separated in the position spectrum. In the beam experiment, we also got the back-to-back correlation of fission fragments which is one of the direct signals characterizing binary decay.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1216-1219
• /
• 2003

The position control is very important in semiconductor manufacturing devices, precision machining tools, precision measuring instruments, etc. The accuracy of measurement for the distance in these devices affect on the performance of the whole devices. Therefore, in those precision instruments, a sensing device that can measure the distance of movement with high-precision resolution is required. In this paper, a novel hybrid (digital and analog) type encoder is proposed. It is shown that from several experiments, a high-resolution angular position measurement device can be designed with a low cost incremental encoder and a DSP controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.56-59
• /
• 2003

This paper presents new interpolation algorithm for measuring high resolution position information which is propered to nano servo control motor using analog quadrature encoder. In the past, there is a large memory and two high price A/D converter for high resolution analog quadrature encoder interpolation. but this paper show that it can make high resolution interpolate using small memory, one A/D converter and comparator. Experimental results show that the proposed algorithm for high resolution position is useful.

• 한국전자파학회논문지
• /
• 제29권7호
• /
• pp.532-539
• /
• 2018

본 논문에서는 3대의 광대역 레이다에서 얻어지는 각각의 고 분해능 거리 프로파일(high resolution range profile: HRRP)을 이용하여 유도탄의 위치를 추정하는 방법에 대하여 제시한다. 레이다는 유도탄의 레이다유효반사면적(radar cross section: RCS)이 큰 표면에 반사되어 돌아오는 신호를 이용하여 거리를 측정한다. 하지만, 레이다에서 유도탄의 표면과 원점 사이의 거리 획득은 어렵다. 이를 보완하기 위하여 유도탄의 이동방향과 레이다의 추적 방향 사이의 각도를 알아내고, 유도탄의 표면에서 원점까지의 거리를 계산하여 레이다 측정 거리에 보상하였다. 따라서 3대의 레이다로부터 유도탄 원점까지의 총 거리를 계산하여 유도탄의 위치를 추정하였다. 전자기 수치해석 프로그램을 이용하여 유도탄 자세 변화에 따른 레이다의 거리 보상을 시뮬레이션 검증하고, 500 MHz 대역폭의 고 분해능 레이다에서 계측한 거리 프로파일을 이용하여 유도탄의 위치를 추정하였다.