• Smart Structures and Systems
• /
• 제7권5호
• /
• pp.349-363
• /
• 2011

To assess the performance of a structure requires the measurement of global and relative displacements at critical points across the structure. They should be obtained in real time and in all weather condition. A Global Navigation Satellite System (GNSS) could satisfy the last two requirements. The American Global Position System (GPS) provides long term acquisitions with sampling rates sufficient to track the displacement of long period structures. The accuracy is of the order of sub-centimetres. The steel building which hosts the authors' laboratory is the reference case-study within this paper. First a comparison of data collected by GPS sensor units with data recorded by tri-axial accelerometers is carried out when dynamic vibrations are induced in the structure by movements of the internal bridge-crane. The elaborations from the GPS position readings are then compared with the results obtained by a Finite Element (FE) numerical simulation. The purposes are: i) to realize a refinement of the structural parameters which characterize the building and ii) to outline a suitable way for processing GPS data toward structural monitoring.

• IEIE Transactions on Smart Processing and Computing
• /
• 제2권2호
• /
• pp.45-56
• /
• 2013

The precise identification of vehicle positions, known as the vehicle localization problem, is an important requirement for building intelligent vehicle ad-hoc networks (VANETs). To solve this problem, two categories of solutions are proposed: stand-alone and data fusion approaches. Compared to stand-alone approaches, which use single information including the global positioning system (GPS) and sensor-based navigation systems with differential corrections, data fusion approaches analyze the position information of several vehicles from GPS and sensor-based navigation systems, etc. Therefore, data fusion approaches show high accuracy. With the position information on a set of vehicles in the preprocessing stage, data fusion approaches is used to estimate the precise vehicular location in the local map building stage. This paper proposes an efficient local map building scheme, which increases the accuracy of the estimated vehicle positions via V2V communications. Even under the low ratio of vehicles with communication modules on the road, the proposed local map building scheme showed high accuracy when estimating the vehicle positions. From the experimental results based on the parameters of the practical vehicular environments, the accuracy of the proposed localization system approached the single lane-level.

• 음성과학
• /
• 제12권3호
• /
• pp.139-151
• /
• 2005

Previous studies have shown that Korean students have difficulty identifying some English consonants which are not in the Korean sound inventory. The aim of this study was to examine the accuracy rate of English consonants correctly identified by 130 college students in order to find out which English consonants were difficult for the students to perceive. The subject's task was to identify one of the minimal pairs played in a quiet laboratory classroom. 100 minimal pairs consisted of syllables with various onsets or codas: stops, fricatives, affricates, liquids and nasals. Results were as follows: First, the average score of the English major group was significantly higher than that of the non-English major group. Second, there was a similar distribution in the rank order of minimal pairs sorted by the accuracy rate between the two groups. Third, the accuracy rate systematically decreased as each score range decreased. Fourth, the students showed higher accuracy in the perception of liquids than that of the stop-fricative contrast. Fifth, the accuracy score in onset position was higher than in coda position. Finally, the students still had problem telling voiced consonants from voiceless ones, especially in coda position. It would be desirable to extend the present research to middle or high school students to fundamentally resolve those listening problems.

• The Plant Pathology Journal
• /
• 제26권1호
• /
• pp.83-89
• /
• 2010

Taxonomic position of 46 Korean isolates of Rhizoctonia solani which were classified into nine intraspecific groups by anastomosis and cultural characteristics was analyzed by randomly amplified polymorphic DNA (RAPD) and sequence analyses of the internal transcribed spacer (ITS) regions of ribosomal DNA. All the isolates within each group showed highly similar band patterns in RAPD. The ITS regions of the isolates within the same groups showed a high level of sequence similarity above 96.0% whereas similarities among different groups were below 94.4%. When compared with several reference strains of R. solani from foreign countries, all the Korean isolates were clustered with the foreign isolates belonging to the same groups in the phylogenetic tree. All six Korean strains of AG-4 were identified as HG-1 out of 3 subgroup of AG-4. We discussed taxonomic position of Korean isolates of R. solani and showed that sequence analysis with ITS regions could be a rapid and useful method for identification of intraspecific group of R. solani.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.507-510
• /
• 2002

An algorithm of 3-D particle image velocimetry(3D-PIV) was developed for the measurement of 3-D velocity Held of complex flows. The measurement system consists of two or three CCD camera and one RGB image grabber. Flows size is $1500{\times}100{\times}180(mm)$, particle is Nylon12(1mm) and illuminator is Hollogen type lamp(100w). The stereo photogrammetry is adopted for the three dimensional geometrical mesurement of tracer particle. For the stereo-pair matching, the camera parameters should be decide in advance by a camera calibration. Camera parameter calculation equation is collinearity equation. In order to calculate the particle 3-D position based on the stereo photograrnrnetry, the eleven parameters of each camera should be obtained by the calibration of the camera. Epipolar line is used for stereo pair matching. The 3-D position of particle is calculated from the three camera parameters, centers of projection of the three cameras, and photographic coordinates of a particle, which is based on the collinear condition. To find velocity vector used 3-D position data of the first frame and the second frame. To extract error vector applied continuity equation. This study developed of various 3D-PIV animation technique.

• 디지털융복합연구
• /
• 제12권5호
• /
• pp.231-238
• /
• 2014

텍스트 기반 패스워드 인증의 문제점을 해결하기 위해서 이미지를 사용하는 그래픽 패스워드가 발전 하였다. 기본적으로 그래픽 패스워드는 화면에 보이는 이미지 위의 정확한 점의 위치를 순서대로 선택(클릭)하여 인증을 처리하는 방식이다. 이러한 기존의 그래픽 패스워드 방식은 화면상의 정확한 지점을 선택하여 클릭하지 못하면 인식에 실패한다. 본 논문에서는 이러한 단점을 개선한 신 개념의 그래픽 패스워드 방식인 PassPositions를 소개한다. PassPositions는 지금까지의 그래픽 패스워드 방식에서 사용하지 않았던 상대위치를 패스워드 생성에 사용한 신개념의 그래픽 패스워드 기법이다. PassPositions는 유니버설 디자인에 기반을 둔 그래픽 패스워드 기법으로 사용자의 신체적 조건에 관계없이 모두가 편리하게 사용할 수 있다.

• Animal Systematics, Evolution and Diversity
• /
• 제36권3호
• /
• pp.240-250
• /
• 2020

Member of the genus Tobrilus Andrássy, 1959, which belongs to Tobrilidae Filipjev, 1918, are known as free-living nematodes in freshwater habitat. This genus was previously unknown from Korea. Five Tobrilus species are here reported for the first time from Korea: Tobrilus aberrans (Schneider, 1925), Tobrilus diversipapillatus (Daday, 1905), Tobrilus gracilis (Bastian, 1865), Tobrilus longus (Leidy, 1851), and Tobrilus wesenbergi (Micoletzky, 1925). Specimens were collected from sediments of the Nakdong River in Korea. Morphological characters and measurements of the specimens generally agree with the original descriptions of Tobrilus species, except for some differences that can be attributed to intraspecific variation among populations(e.g., nerve ring position [% pharynx] and reproductive length). Each species can be distinguished from other members of the genus by specific characters (e.g., cephalic setae length and position, buccal cavity and pocket shape, vulva position, degree of development of reproductive system, and tail length and shape). Here, five species in the genus Tobrilus are fully redescribed and illustrated using optical microscopy images. DNA barcode sequence information (the D2-D3 region of 28S rDNA) is also provided for molecular species identification.

• Journal of information and communication convergence engineering
• /
• 제17권2호
• /
• pp.91-96
• /
• 2019

In this study, a system to increase the expressiveness of existing standard terminology using three-dimensional (3D) data is designed. We analyze the existing medical terminology system by searching the reference literature and perform an expert group focus survey. A human body image is generated using a 3D modeling tool. Then, the anatomical position of the human body is mapped to the 3D coordinates' identification (ID) and metadata. We define the term to represent the 3D human body position in a total of 12 categories, including semantic terminology entity and semantic disorder. The Blender and 3ds Max programs are used to create the 3D model from medical imaging data. The generated 3D human body model is expressed by the ID of the coordinate type (x, y, and z axes) based on the anatomical position and mapped to the semantic entity including the meaning. We propose a system of standard terminology enabling integration and utilization of the 3D human body model, coordinates (ID), and metadata. In the future, through cooperation with the Electronic Health Record system, we will contribute to clinical research to generate higher-quality big data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1718-1721
• /
• 1997

An image processing algorithm is developed in order to recognize the type of cars, the position of a number plate and the characters on the plate. to recognize the type of cars, comparison of two images is used. One has a car image, the other is just a background image without car. After that recognition, a vertical line filter is used to find the location of the plate. Finally the simularity mehod is used to recognize the numbers on plates.

• 산업공학
• /
• 제23권3호
• /
• pp.239-245
• /
• 2010

This paper considers a localization problem of a moving tag on RFID(Radio Frequency Identification) systems, where a positioning engine collects TDOA(Time-difference of Arrival) signal from a target tag to estimate the position of the tag. To localize the tag in the RFID system, we develop two heuristic algorithms and evaluate their performance in the estimation error and computational time by using randomly generated numerical examples. Based upon the performance evaluation, we can conclude our algorithms are valuable for localization the moving target.