• The korean journal of orthodontics
• /
• v.32 no.1 s.90
• /
• pp.19-31
• /
• 2002

To investigate the association between the hypertrophy of adenoid and jaw morphology during growth, this paper was based on children patients with experimental adenoids (male-15 subjects at each bone age group, female-15 subjects at each bone group) and comparing them to data taken from a control group (male-15 subjects at each bone age group, female-15 subjects at each bone group) with normal respiratory function. The comparisons between the groups were done at each growth stage using cervical vertebrae maturation index(CVMI) of Hassel. The obtained results were as follows : 1. The differences in craniofacial morphology between experimental group and control group were appeared from CVMI 3 and CVMI 4 (aroud adolescent period) in males, and from CVMI 1 in females. 2. The mandibular position of experimental group was more inferior than control group. The difference appeared at adolescent period(male : at CVMI 4, female : at CVMI 5). 3. Experimental group had greater anterior facial height than control group. This difference seemed a relation with lower anterior facial height. The difference appears at CVMI 3(11.94 ${\pm}$ 1.38 years old, at adolescent period) in male and at CVMI 1 in female. 4. The adenoid size of control male group was increased until CVMI 2(10.58 ${\pm}$ 1.07 years old, just before adolescent growth peak) and then decreased, but in female the adenoid size was decreased from CVMI 1(6.92 ${\pm}$ 0.53 years old).

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.1
• /
• pp.29-41
• /
• 2001

Background : The appearance of multiple-drug-resistant Mycobacterium tuberculosis strains has been seriously compromising successful control of tuberculosis. Rifampin-resistance, caused by mutations in the rpoB gene, can be indicative of multiple-drug-resistance, and its detection is of great importance. The present study aimed to develop an oligonucleotide chip for accurate and convenient screening of drug-resistance. Methods : In order to detect point mutations in the rpoB gene, an oligonucleotide chip was prepared by immobilizing specific probe DNA to a microscopic slide glass by a chemical reaction. The probe DNA that was selected from the 81 bp core region of the rpoB gene was designed to have mutation sites at the center. A total of 17 mutant probes related to rifampin-resistance including 8 rifabutin-sensitive mutant probes were used in this study. For accurate determination, wild type probes were prepared for each mutation position with an equal length, which enabled a direct comparison of the hybridization intensities between the mutant and wild type. Results : Mycobacterial genomic DNA from clinical samples was tested with the oligonucleotide chip and the results were compared with those of the drug-susceptibility test in addition to sequencing and INNO-LiPA Rif. TB kit test in some cases. Out of 15 samples, the oligonucleotide chip results of 13 samples showed good agreement with the rifabutin-sensitivity results. The two samples with conflicting result also showed a discrepancy between the other tests, suggesting such possibilities as existence of mixed strains and difference in drug-sensitivity. Further verification of these samples in addition to more case studies are required before the final evaluation of the oligonucleotide chip can be made. Conlcusion : An oligonucleotide chip was developed for the detection of rpoB gene mutations related to drugsusceptibility. The results to date show the potential for using the oligonucleotide chip for accurate and convenient screening of drug-resistance to provide useful information in antituberculosis drug therapy.

• Journal of Radiation Protection and Research
• /
• v.30 no.1
• /
• pp.1-7
• /
• 2005

Radiation absorption parameters of carbon fiber panel were measured in comparison to acrylic panel. $30{\times}30cm$ sized 2mm thick carbon fiber panel and identical sized 6mm thick acrylic panel were placed in tray holder position and 0cm, 5cm, 10cm from surface of phantom. Radiation field size was $10{\times}10cm$. 50MU of 4MV photon was irradiated to the phantom with dose rate of 300MU/min. Source-to-phantom distance was 120cm. Radiation dose was measured with 0.6cc Farmer-type ionization chamber with 1cm build-up. Measurement was repeated thrice and normalization was done to the dose of the open field. Radiation transmission rate of carbon fiber panel is approximately 1% lower than acrylic panel of equivalent thickness. However, considering the strength of the material, transmission rate is higher for carbon fiber panel. Although carbon fiber panel increases the radiation dose when attached to the surface for about 2%, it normalizes the radiation dose to 97-99% of irradiated dose which could have been lowered to as much as 5-7.5% with acrylic panel. As carbon fiber panel is stronger than acrylic panel, radiation fixation device could be made thinner and thus lighter and furthermore, with increased radiation transmission. This in turn makes carbon fiber more ideal material for radiation fixation device over conventionally used acrylic.

• Journal of Life Science
• /
• v.13 no.3
• /
• pp.280-290
• /
• 2003

The incorporation of RAPD markers into the previous classical and RFLP genetic linkage maps will facilitate the generation of a detailed genetic map by compensating for the lack of one type of marker in the region of interest. The objective of this paper was to present features we observed when we associated RAPD map from an intraspecific cross of a Glycine max$\times$G. max, 'Essex'$\times$PI 437654 with the public RFLP map developed from an interspecific cross of G. max$\times$G. soja. Among 27 linkage groups of RAPD map, eight linkage groups contained probe/enzyme combination RFLP markers, which allowed us the incorporation of RAPD markers into the public RFLP map. Map position rearrangement was observed. In incorporating L.G.C-3 into the public RFLP linkage group a1 and a2, both pSAC3 and pA136 region, and pA170/EcoRV and pB170/HindIII region were in opposite order, respectively. And, pk400 was localized 1.8 cM from pA96-1 and 8.4 cM from pB172 in the public RFLP map, but was localized 9.9 cM from i locus and 18.9 cM from pA85 in our study. A noticeable expansion of the map distances in the intraspecific cross of Essex and PI 437654 was also observed. Map distance between probes pA890 and pK493 in L.G.C-1 was 48.6 cM, but it was only 13.3 cM in the public RFLP map. The distances from the probe pB32-2 to pA670 and from pA670 to pA668 in L.G. C-2 were 50.9 cM and 31.7 cM, but they were 35.9 cM and 13.5 cM in the public RFLP map. The detection of duplicate loci from the same probe that were mapped on the same or/and different linkage group was another feature we observed.

• Korean Journal of Community Nutrition
• /
• v.9 no.2
• /
• pp.191-203
• /
• 2004

This study was performed to compare the foodservice management practices in the employee feeding operations of Jeonnam and Chungchong area. Questionnaires were developed and mailed to 160 dietitians with management in employee foodservice of Jeonnam and Chungchong area. Completed questionnaires were received from 124 dietitians with a response rate of 77.5%. The results of this study can be summarized as follows:. Age, work experience, concurrent position and work time of dietitians were significantly higher in the Chungchong area than those in the Jeonnam area. Times of meals and amount of meals served per day in the Chungchong area were significantly higher than those in the Jeonnam area. The type of menu by foodservice operation was high non-selective menu in both areas, especially non-selective menu was high in self-operated place whereas selective menu was high in contract management. Period of cycle menu was 10-15 days in Jeonnam area, but that was 7 days in Chungchong area and so cycle menu of both areas was significantly different (p ＜ 0.001). Most considerable factor in menu planning was preference in Jeonnam area and was cost in the Chungchong area. Food purchasing method was used mostly by automatic computerized order in the Jeonnam area whereas telephone or mail order was high in the Chungchong area.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.97-105
• /
• 2018

Purpose : Proton Therapy using Bragg-peak, because it has distinct characteristics in providing maximum dosage for tumor and minimal dosage for normal tissue, a medical imaging system that can quantify changes in patient position or treatment area is of paramount importance to the treatment of protons. The purpose of this research is to evaluate the usefulness of the algorithm by comparing the image matching through the set-up and in-house code through the existing dips program by producing a Matlab-based in-house registration code to determine the error value between dips and DRR to evaluate the accuracy of the existing treatment. Materials and Methods : Thirteen patients with brain tumors and head and neck cancer who received proton therapy were included in this study and used the DIPS Program System (Version 2.4.3, IBA, Belgium) for image comparison and the Eclipse Proton Planning System (Version 13.7, Varian, USA) for patient treatment planning. For Validation of the Registration method, a test image was artificially rotated and moved to match the existing image, and the initial set up image of DIPS program of existing set up process was image-matched with plan DRR, and the error value was obtained, and the usefulness of the algorithm was evaluated. Results : When the test image was moved 0.5, 1, and 10 cm in the left and right directions, the average error was 0.018 cm. When the test image was rotated counterclockwise by 1 and $10^{\circ}$, the error was $0.0011^{\circ}$. When the initial images of four patients were imaged, the mean error was 0.056, 0.044, and 0.053 cm in the order of x, y, and z, and 0.190 and $0.206^{\circ}$ in the order of rotation and pitch. When the final images of 13 patients were imaged, the mean differences were 0.062, 0.085, and 0.074 cm in the order of x, y, and z, and 0.120 cm as the vector value. Rotation and pitch were 0.171 and $0.174^{\circ}$, respectively. Conclusion : The Matlab-based In-house Registration code produced through this study showed accurate Image matching based on Intensity as well as the simple image as well as anatomical structure. Also, the Set-up error through the DIPS program of the existing treatment method showed a very slight difference, confirming the accuracy of the proton therapy. Future development of additional programs and future Intensity-based Matlab In-house code research will be necessary for future clinical applications.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.4-37
• /
• 2019

Buncheong Ware, which was produced for approximately 200 years from the end of the Goryeo Dynasty to the beginning of the Joseon Dynasty, was used for royal house and state affairs during the early Joseon Dynasty. Records of Buncheong Ware can be found with Jagiso and Dogiso, considered the place of production, in the 'Sejongsylrok jiliji'. This is notable, unlike celadon and white porcelain. However, compared to Gyeongsangnam-do and Gyeongsangbuk-do, the study of Jagiso and Dogiso in Jeollanam-do and Jeollabuk-do has been unsatisfactory. In this paper, we examined the locations of Jagiso and Dogiso in the Jeollanam-do prefecture. This study is focused on Najumok, located in the western part of Jeollanam-do. The following research results were obtained: First, the locations of Jagiso and Dogiso in nine areas were examined. These nine areas comprised Najumok and its immediate provinces of Haejingun, Yeongamgun, Yeonggwanggun, Hampyeonghyeon, Muanhyeon, Gochanghyeon, Heungdeokhyeon and Jangseonghyeon. Previous research results exist for some of the regions; however, only Buncheong Ware was used to estimate Jagiso and Dogiso. In this paper, we tried to discover a more accurate position of Jagiso and Dogiso through a comparison of the place names recorded in the 'Sejongsylrok jiliji' and the place names recorded in the 'Hoguchoungsu'. Also, pottery-related area names and Buncheong Ware obtained from the field survey were reviewed. Table 2 shows the specific positions of Jagiso and Dogiso in the areas examined. Second, it would appear that pottery was produced not only in Jagiso but also in Dogiso. This is because much of Buncheong Ware was unearthed in Najumok, Yeongamgun, and Muanhyeon Dogiso. However, it was only excavated from the Buncheong Kiln Site in Yucheon Village, Sangweol-ri, Yeongam-gun; there could be limitations regarding to the rest of the areas because only a field survey was conducted, not an excavation. A recent excavation at Donggok Village in Cheongdo-ri, Gimje also confirmed a Buncheong Kiln Site. There were two Buncheong Ware ('公', '上') artifacts excavated from the site, believed to be Gongnapjagi. In addition, Cheongdo-ri, where the Buncheong Kiln Site is located, was found to be an area in Wurimgokmyeon, a former Wurimgok at a Dogiso in Jeonjubu. Consequently, it would seem that Dogiso also produced porcelain (Buncheong Ware). If more data can be obtained from the excavations at sites considered to be Dogiso, the results of Dogiso-related research will be strengthened. Third, in previous surveys, field surveys and excavation surveys were based on estimates using artifacts, but the name of the location of the Jagiso and Dogiso may be confirmed more accurately by tracking the changes in the names of the administrative areas. Therefore, although it is important to conduct research using the results of surveys or excavations, changes in the place names or places related to porcelain must not be overlooked.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.305-327
• /
• 2005

Although the stone pagoda in Mireuk Temple site, Iksan, Cholla Province has been collapsed long time ago, few historical record has clearly explained the reason why the pagoda was collapsed and when. The west side of the pagoda have been destroyed from top to the sixth floor and the broken or damaged stone materials have been piled up in disorder. the lower part in the west was reinforced and enclosed by a stone embankment levelled to the height of the first storey of the pagoda. With no record informing the historical fact when it was made and by whom, it is only presumed that the embankment may have been built long time ago in order to prevent remains from further destruction. In the second chapter of the study, it has been tried to restore a reasonable historical background of the pagoda based on records or comments found in literatures such as traditional poetry and essays in chronological order. The collapsed slope in the west side, just above the embankment surrounding the lower part of the pagoda, was concreted in 1915 during the Japanese colonial period. Then in 1998, the Jeollabukdo has examined the structural safety of the pagoda. The Cultural Properties Committee has decided have the concrete layer removed and moreover to take apart the whole pagoda. It is also included that the disassembled stone materials should be given proper conservation treatments before being put into the place where they were in the reassembling process. The front view of the collapsed phase of the pagoda was revealed when the concrete-covered layer was removed. A hypothesis was built that there may be as many different appearances of collapsed pagoda depending on natural causes such as earthquake, sunken foundation, flood and typhoon. In chapter three, characteristic features were classified by examining various images of pagodas destroyed by different natural reasons mentioned in historical records. The chapter four dealt with comparison and analysis on the conditions shown in the stone pagoda in Mireuk Temple site and other examples studied in advance. The result of the study revealed that though having been made higher than the ground surface, the podium or the base of the pagoda actually has been eroded by rain and water. The erosion is supposed not only to have been proceeded for a long time without break but also to have caused the first storey body stone in the west inclined to outward. It has come to a conclusion that the pagoda may have been lead to collapse when the first storey body stone, supporting the whole weight from the upper storeys, became out of upright position and lost its balance. However, no such distinctive features of structural changes shown in pagodas collapsed by natural causes like earthquake, typhoon or sunken basement, have been found in the stone pagoda in Mireuk Temple site.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.96
• /
• pp.209-223
• /
• 2019

The Iron Seated Buddha sculpture in the National Museum of Korea had long sat unregistered in storage at the museum. However, a new accession number "bon9976" has recently been assigned to it. This sculpture was excavated from the neighborhood of Heungnyongsa Temple in Baekun-ri, Yidong-myeon, Pocheon-gun, Gyeonggi-do Province together with another Iron Seated Buddha sculpture(bon9975) called "Iron Buddha from Pocheon." A comparison and examination of Gelatin Dry Plate and official documents from the Joseon Government-General Museum during the Japanese occupation period have revealed that these two Iron Buddha sculptures were transferred to the Museum of the Government-General of Korea on December 17, 1925. The Iron Seated Buddha sculpture(bon9976) has a height of 105 centimeters, width at the shoulders of 57 centimeters, and width at the knee of 77 centimeters. The Buddha is wearing a robe with rippling drapery folds and the right shoulder exposed. He is seated in the position called gilsangjwa(the seat of good fortune) in which the left foot is placed over the right thigh. The features of the Buddha's oval face are prominently sculpted. The voluminous cheeks, eye sockets in a large oval shape, slanted eyes, short nose, and plump lips can also be found in other ninth-century Iron Seated Buddha sculptures at Silsangsa Temple in Namwon, Jeollanam-do Province, Hancheonsa Temple in Yecheon, Gyeongsangbuk-do Province, and Samhwasa Temple in Donghae-si, Gangwon-do Province. Moreover, its crossed legs, robe exposing the right shoulder, and rippling drapery folds suggest that this sculpture might have been modeled after the main Buddha sculpture of the Seokguram Grotto from the eighth century. The identity of this Iron Seated Buddha can be determined using the Gelatin Dry Plate(M442-2, M442-7). In them, the Buddha has its right palm facing upwards and holds a medicine jar on its left palm. Until now, the Iron Seated Bhaiṣajyagura(Medicine) Buddha(bon1970) excavated from Wonju has been considered the sole example of an iron Medicine Buddha sculpture. However, this newly registered Iron Seated Buddha turns out to be a Medicine Buddha holding a medicine jar. Furthermore, it serves as valuable material since traces of gilding and lacquering clearly remain on its surface. This Iron Seated Buddha sculpture (bon9976) is presumed to have been produced around the ninth century under the influence of Esoteric Buddhism by the Monk Doseon(827~898), a disciple of the Monk Hyecheol, to protect the temple and help the country overcome geographical shortcomings. According to the records stored at Naewonsa Temple(later Heungnyongsa Temple), Doseon selected three significant sites, including Baegunsan Mountain, built "protector" temples, created the Bhaisajyagura Buddha triad, and enshrined them at the temples. Moreover, the inscription on the stele on the restoration of Seonamsa Temple states that Doseon constructed temples and produced iron Buddha sculptures to help the country surmount certain geographical shortcomings. Heungnyongsa Temple is located in Dopyeong-ri, Yidong-myeon, Pocheon-si, Gyeonggi-do Province. This region appears to have been related to rituals directed to the Medicine Buddha since Yaksa Temple(literally, "the temple of medicine") was built here during the Goryeo Dynasty, and the Yaksa Temple site with its three-story stone pagoda and Yaksadong Valley still exist in Dopyeong-ri.

• The Journal of Korean Philosophical History
• /
• no.59
• /
• pp.215-240
• /
• 2018

In this paper, the contents about funeral rites in "the Book of Etiquette and Ceremonial"(儀禮) were compared to those in the books of Hundred Schools of Thought. The most direct and systematic document related to funeral rites is "the Book of Etiquette and Ceremonial". Some of its contents had been reflected in the books of Hundred Schools of Thought, such as "Zuo Zhuan", "Mozi" and "Xunzi", while others didn't agree with one another. It happened because some contents had been already reflected in the books of Hundred Schools of Thought in the process of establishing scriptures about manners including the ancient "Book of Etiquette and Ceremonial", and because, on the contrary, the contents of the books of Hundred Schools of Thought had become included in the scriptures about manners by following Confucianism. First, the basic contents of Chapter 'Mourning Clothes' in "the Book of Etiquette and Ceremonial" were generally reflected in the books of Hundred Schools of Thought, and there are many contents in common. Most prominently, three-year-mourning for parents and a king had been enhanced in Confucianism commonly. Although Mohism opposed Confucian luxurious and long funerals (厚葬久喪), the mourning clothing system in "the Book of Etiquette and Ceremonial" can be said to have been people's universal understanding until the Spring and Autumn period at least. In addition, it has been verified that there were differences in the mourning clothes depending on the one who wore them was an adult or not both in "the Book of Etiquette and Ceremonial" and the books of Hundred Schools of Thought. On the other hand, many arguments in the contents about funeral rites reflected in the books of Hundred Schools of Thought were different from the rules in "the Book of Etiquette and Ceremonial". In particular, the mourning clothes for parents reflected in the books of Hundred Schools of Thought showed that there were differences depending on social positions, which was dissimilar to the regulations in "the Book of Etiquette and Ceremonial". Also, different from the mourning clothes system for parents and a king, the system for a wife and a concubine was dissimilar to the rules in "the Book of Etiquette and Ceremonial" in many ways. Since the regulations of Chapter of 'Mourning Clothes' in the present version of "the Book of Etiquette and Ceremonial" suggest different mourning clothes and periods depending on who wears the mourning clothes and what social position the deceased had, it seems difficult to implement them strictly historically as well as at those times. Especially, while the funeral rituals for a child was relatively clear based on the parent-child relationship of "affection" and those for a king and parents were plainly regulated and emphasized, the rules of those for a vassal and a wife were absent or ambiguous in many cases. Therefore, the term of "the Theee Bonds"(三綱) appeared first in Dong Zhongshu(董仲舒)'s "Luxuriant Dew of the Spring and Autumn Annals"(春秋繁露) that reflected the ideology of political ethics of Han Dynasty(漢代), but regarding its contents, it can be said to have been already reflected in "the Book of Etiquette and Ceremonial".