• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.1
• /
• pp.21-30
• /
• 2001

The purpose of this study was to evaluate the skeletal relapse pattern of the mandibular prognathic patients after mandibular set back surgery by sagittal split ramus osteotomy. The horizontal and vertical position of the cephalometric points were measured before, after surgery and after one-year follow up period. The next, the positional change of the proximal and distal mandibular segment were evaluated respectively. The obtained results were as follows; 1. The horizontal and vertical position of Cd was not changed before and after surgery, and it was maintained its original position during the observation periods. 2. As the mandibular prognathism of the patients was severe before surgery, the more skeletal relapse tendency was observed during follow-up period(p<0.05). 3. As the horizontal positional change of the mandible which was obtained by mandibular set-back surgery was large, the more horizontal relapse tendency was observed during follow-up period(p<0.05). 4. The corpus axis angle decreased by sagittal split ramus osteotomy(p<0.01), but it was kept its reoriented position during follow-up period. 5. During the follow-up period after mandibular set-back by sagittal split ramus osteotomy, the forward relapse of mandible correlated with not only the forward rotation of the proximal segment but also the forward movement of the distal segment(p<0.05).

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.140-150
• /
• 2004

In this study, the effect of relative position of the blade for the fixed vane has been investigated on blade surface heat transfer. The experiments were conducted in a low speed stationary annular cascade, and heat transfer of blade was examined for six positions within a pitch. Turbine test section has one stage composed of sixteen guide vanes and blades. The chord length of the tested blade is 150 mm and the mean tip clearance of the blade having flat tip is about $2.5\%$ of the blade chord. For the detailed mass transfer measurements on the blade surfaces, a naphthalene sublimation technique was used. The inlet flow Reynolds number is fixed to $1.5{\times}10^5$. Complex heat transfer characteristics are observed on the blade surface due to various flow characteristics, such as separation bubble, relaminarization, transition to turbulence and leakage vortices. The distributions of velocity and turbulence intensity change significantly with the relative position due to the blockage effect of the blade. This causes the variation of heat transfer patterns on the blade surface. The results show that the flow near the leading edge get highly disturbed and deflected toward the either side of the blade when the blade leading edge is positioned close to the trailing edge of the vane. Therefore, separation bubble disappears on the pressure side and overall heat transfer on the relaminarization region is increased. But, due to reduced tip gap flow at the upstream region, the effect of leakage flow on the upstream region of the blade surface is weakened. Thus, the heat transfer characteristics significantly change with the blade positions.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.181-189
• /
• 2005

To know the proper impact posture and changes for the various clubs, changes of impact variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed video cameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. Major findings of this study were as follows. 1. Lateral position of the head remained more right side of the target up to 3.5cm compared to the setup as the length of the club increased. 2. Left shoulder raised up to 5cm and right shoulder lowered up to 2.5cm compared to setup. The shoulder line opened slightly (maximum 11 degrees) to the target line. 3. Forward lean angle of the trunk decreased up to 4 degrees (more erected) compared to setup. 4. Side lean angle of the trunk increased compared to setup and increased up to 16 degrees as the club length increased. 5. The pelvis moved to the target line direction horizontally and opened up to 31 degrees. Right hip moves laterally to the grip position at the setup. 6. Flexion of the left leg maintained almost constantly but the right leg flexed up to 11 degrees compared to setup. 7. Left arm is straightened but the right arm flexed about 20degrees compared to straight. 8. Center of the shoulders were in front of the knees and toes of the feet. 9. Hands moved to the left (8.7cm), forward (5.7cm) and upward (11.6cm) compared to the setup. This is because of the rotation of pelvis and shoulders. 10. Shaft angle to the ground was smaller than the lie angle of the clubs but it increased close to the lie of the clubs at impact.

• Journal of Periodontal and Implant Science
• /
• v.49 no.3
• /
• pp.185-192
• /
• 2019

Purpose: Implant wall thickness and the height of the implant-abutment interface are known as factors that affect the distribution of stress on the marginal bone around the implant. The goal of this study was to evaluate the long-term effects of supracrestal implant placement and implant wall thickness on maintenance of the marginal bone level. Methods: In this retrospective study, 101 patients with a single implant were divided into the following 4 groups according to the thickness of the implant wall and the initial implant placement level immediately after surgery: 0.75 mm wall thickness, epicrestal position; 0.95 mm wall thickness, epicrestal position; 0.75 mm wall thickness, supracrestal position; 0.95 mm wall thickness, supracrestal position. The marginal bone level change was assessed 1 day after implant placement, immediately after functional loading, and 1 to 5 years after prosthesis delivery. To compare the marginal bone level change, repeated-measures analysis of variance was used to evaluate the statistical significance of differences within groups and between groups over time. Pearson correlation coefficients were also calculated to analyze the correlation between implant placement level and bone loss. Results: Statistically significant differences in bone loss among the 4 groups (P<0.01) and within each group over time (P<0.01) were observed. There was no significant difference between the groups with a wall thickness of 0.75 mm and 0.95 mm. In a multiple comparison, the groups with a supracrestal placement level showed greater bone loss than the epicrestal placement groups. In addition, a significant correlation between implant placement level and marginal bone loss was observed. Conclusions: The degree of bone resorption was significantly higher for implants with a supracrestal placement compared to those with an epicrestal placement.

• The Journal of Korean Medicine
• /
• v.30 no.3
• /
• pp.98-105
• /
• 2009

Objective: Increased aortic and carotid arterial augmentation index (AI) is associated with the risk of cardiovascular disease. The most widely used approach for determining central arterial AI is by calculating the aortic pressure waveform from radial arterial waveforms using a transfer function. But how the change of waveform by applied pressure and the pattern of the change rely on subject's characteristics has not been recognized. In this study, we use a new method for measuring radial waveform and observe the change of waveform and the deviation of radial AI in the same position by applied pressure. Method: Forty-six non-patient volunteers (31 men and 15 women, age range 21-58 years) were enrolled for this study. Informed consent in a form approved by the institutional review board was obtained in all subjects. Blood pressure was measured on the left upper arm using an oscillometric method, radial pressure waves were recorded with the use of an improved automated tonometry device. DMP-3000(DAEYOMEDI Co., Ltd. Ansan, Korea) has robotics mechanism to scan and trace automatically. For each subject, we performed the procedure 5 times for each applied pressure level. We could thus obtain 5 different radial pulse waveforms for the same person's same position at different applied pressures. All these processes were repeated twice for test reproducibility. Result: Aortic AI, peripheral AI and radial AI were higher in women than in men (P<0.01), radial AI strongly correlated with aortic AI, and radial AI was consistently approximately 39% higher than aortic AI. Relationship between representative radial AI of DMP-3000 and peripheral AI of SphygmoCor had strongly correlation. And there were three patterns in change of pulse waveform. Conclusion: In this study, it is revealed the new device was sufficient to measure how radial AI and radial waveform from the same person at the same time change under applied pressure and it had inverse-proportion to applied pressure.

• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.193-203
• /
• 1994

The author performed this study for investigation of the magnitude of mandibular positional change caused by joint sound during mandibular opening and closing movement. There have been many studies stated mandibular border movement or other functional movement, and there also have been many studies reported clicking sound related to mandibular movement speed, trajectory and clinicl course of temporomandibular disorders(TMDs), but there have not been so many studies stated spatial mandibular position accompanied by joint sound. For this study 46 TM joint from the patients with TMDs were used and they were compared by character and occuring phase of the joint sound. Synchronized data which were amplitude and frequency of joint sound and amount of mandibular positional change were collected through sonopak and BioEGN rotate of Biopak system, respectively. Mandibular position was analyzed for translational and rotational movement change between before and after joint sound. The obtained data were processed with SAS program and summary of this paper were as follows : 1. Mean value of the amount of translational movement in whole joints were 6.0mm in vertical direction, 3.3mm in anteroposterior direction and 0.8mm in lateral direction between before and after joint sound. 2. Mean value of the amount of translational movement in clicking joinnts showed slightly increased tendency than in popping joints. 3. The amount of mandibular change in translational movement during closing phase were more than during opening phase. 4. The amount of mandibular rotational change in whole joints were $1.1^{\circ}$, 1.0mm in frontal plane and $0.9^{\circ}$, and 0.8mm in horizontal plane. 5. The amount of rotational movement were more in clicking joints than in popping joints and were more during closing phase than during opening phase, but statistically significance were showed only in frontal plane.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.6
• /
• pp.57-62
• /
• 2015

The test of comparing liquid flow calibration system (approved by KOLAS) for accuracy and structure change test was performed in the test bed in order to evaluate the typical characteristics of the electromagnetic flow meters and parshall flume that are generally used in the water discharging facilities. The results of the accuracy comparing test with liquid flow calibration system showed the error of less than 2%. Pharshall plume got error up to -8.3% (low flow) from the flow rate test, but less than 4% from the accumulated flow test because of offset error at high flow rate and low flow rate. Evaluation of structual change test was tested with only parshall flume using structure and it consisted of installation angle (parshall flume and level sensor) and position change. Installation angle, water level sensor angle and position changing test for parshall flume had errors of 3.1%~-9.2%, 0.4%~-5.6% and 0.2%~1.3% respectively. Especially, the error showed the largest increase when the water level sensor measured the point of decreased flow by the structure change. Therefore, error factors (change of straight pipe length, installation of obstacle or effect of foreign substances on water level sensor) that can often occur in the field should be derived and the research for optimized installation method should be carried out continuously.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.3
• /
• pp.105-110
• /
• 2016

PURPOSE: The aim of this study was to investigate the influence of hip abduction velocity and position change on the relative onset times of the gluteus medius, the tensor fascia latae, and the quadratus lumborum in healthy subjects. METHODS: For this study, 15 healthy young adults were recruited. The subjects were asked to move their hip joints up to 35 degrees of abduction at a speed of $70^{\circ}/sec$ and $17.5^{\circ}/sec$ in the supine and side-lying positions. Electromyography data was collected for the gluteus medius, tensor fascia latae, and quadratus lumborum to determine the onset times. RESULTS: There were significant differences between the fast speed ($70^{\circ}/sec$) and the slow speed ($17.5^{\circ}/sec$) in hip abduction in a supine position and in a side-lying position, relatively. The onset time of the gluteus medius was faster than that of the tensor fascia latae and the quadratus lumborum in the side-lying position at the speed of $70^{\circ}/sec$ and $17.5^{\circ}/sec$. CONCLUSION: The findings of this study indicated that hip abduction in a side-lying position is an effective method to recruit the gluteus medius earlier than the tensor fascia latae and the quadratus lumborum. Thus, the exercise position is considered necessory in the purpose of rehabilitation for gluteus medius muscle strengthening program.

• The Korean Journal of Pain
• /
• v.23 no.3
• /
• pp.190-197
• /
• 2010

Background: Conventional spinal saddle block is performed with the patient in a sitting position, keeping the patient sitting for between 3 to 10 min after injection of a drug. This amount of time, however, is long enough to cause prolonged postoperative urinary retention. The trend in this block is to lower the dose of local anesthetics, providing a selective segmental block; however, an optimal dose and method are needed for adequate anesthesia in variable situations. Therefore, in this study, we evaluated the question of whether only 1 min of sitting after drug injection would be sufficient and safe for minor anorectal surgery. Methods: Two hundred and sixteen patients undergoing minor anorectal surgery under spinal anesthesia remained sitting for 1 min after completion of subarachnoid administration of 1 ml of a 0.5% hyperbaric bupivacaine solution (5 mg). They were then placed in the jack-knife position. After surgery, analgesia levels were assessed using loss of cold sensation in the supine position. The next day, urination and 11-point numeric rating scale (NRS) for postoperative pain were assessed. Results: None of the patients required additional analgesics during surgical manipulation. Postoperative sensory levels were T10 [T8-T12] in patients, and no significant differences were observed between sex (P = 0.857), height (P = 0.065), obesity (P = 0.873), or age (P = 0.138). Urinary retention developed in only 7 patients (3.2%). In this group, NRS was $5.0{\pm}2.4$ (P = 0.014). Conclusions: The one-minute sitting position for spinal saddle block before the jack-knife position is a safe method for use with minor anorectal surgery and can reduce development of postoperative urinary retention.