• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.91-98
• /
• 2004

Human uses level difference and time difference to get space information. Therefore this paper shows that method to presume direction of sound source by time difference and to mark presumed position. The position means direction from geometrical center of sensors to the sound source. To get the time difference of microphones input level, we will be explained about arrangement of microphones which used for the sensor to take the sound signal. It is included distance among the 3 microphones and distance between microphones and sound source. Secondly, input signals are transmitted to CPU througth digital process. CPU is used to DSP(Digital Signal Processor) for manage the signal by real time. Finally, the position of sound source is perceived by an explained algorithm in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.64.4-64
• /
• 2001

Localization is the key role in controlling the Mobile Robot. In this papers, a development of the sensor fusion algorithm for controling UTV(Unmanned Tracked Vehicle) is presented. The multi-sensocial dead-rocking subsystem is established based on the optimal filtering by first fusing heading angle reading from a magnetic compass, a rate-gyro and two encoders mouned on the robot wheels, thereby computing the deat-reckoned location. These data and the position data provoded by LBL system are fused together by means of an extended Kalman filter. This algorithm is proved by simulation studies.

• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.93-100
• /
• 2011

This study was conducted to verify the applicability of robot milking system through acquisition and analysis of model teat's position information using scanning range finder (SRF). Model teats, same size and shape as real teats, were designed to analyze the properties according to the material, distance error and angle error of the sensor. In addition, 2-dimensional distance information of each teats was obtained at same time with 4 teat models and the result were as follows. 1. In the case of the fingers on the experiment for selection of materials for teat model, the distance error was from 4.3 mm to 1.3 mm, average was 2.8 mm as a minimum record. In the case of rubber material, average distance error was 4.3 mm. So, this material was considered to be a most suitable model. 2. The distance error was maximum at 100 mm distance. The more distance increased, the less error increased up to 300 mm. Then the error increased after 300 mm and decreased again. 3. The maximum angle error of 10.1 mm was measured at $170^{\circ}$, in case of $70^{\circ}$ the error was 0.2 mm as a minimum value. There was no specific tendency to error of angle. 4. In the 2-dimensional location error for 4 teat models, distance error was 3.8 mm as minimum and 7.2 mm as maximum. The angle error was $1.2^{\circ}$ as maximum. All of errors were included within the accuracy of sensor, the robot milking system was considered to be applicable to measure the distance of teats due to the measuring velocity of SRF and the hole size of teat-cup.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.1507-1510
• /
• 2012

본 논문은 EPS(전자식 파워 스티어링)에 사용되는 Torque and Angle sensor 의 절대각 신뢰성 보증 방식에 관한 것으로, Inductive 방식의 센서에서 절대각 신호 신뢰성 보증에 대한 효과적인 방법을 제시한다. 전동식 파워 스티어링 시스템의 ECU(전자제어유닛)는 조타각도를 출력하는 2 개의 소자에서 버니어 알고리즘을 통해 360 도 이상의 멀티 조타각을 인식하게 된다. 토크&조향각 센서는 절대 조향각을 계산하는 1 개의 Hall IC 소자 신호와, 상대 조향각을 계산하는 ASIC 소자 신호를 사용하여 멀티 조타각을 인식한다. 인식된 조타각이 추가적인 검증 절차 없이 제어에 사용된다면, 센서의 이상 발생 시에 운전자의 조타감을 불편해질 수 있고, 나아가서는 차량사고의 위험을 발생시킬 수 있다.따라서 차량 거동 시 절대 조향각의 신뢰성 검증은 제어와 동시에 항상 요구되어야 한다. 특히, 유럽/미국 업계의 ISO 26262 표준 도입에 따라 절대 조향각의 높은 신뢰성이 요구된다. 본 논문에서는 이러한 요구사항을 만족하기 위해 측정된 절대각 신호를 기준으로 상대각 신호 2 개를 측정에 사용하고, Driving 시에도 절대각 기준의 신뢰도 향상을 위해 절대각 신호 1 개를 비교기로 사용한다. 최적화된 에러 기준을 근거로 절대 조향각 신호의 신뢰성을 보장하는 방법을 제안한다. 이러한 방법을 적용한다면, 정확하고 안정적으로 조타각을 결정함으로써 EPS 안전성 확보에 도움을 줄 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.237-242
• /
• 2009

Comparing with fixed-type Robots, Mobile Robots have the advantage of extending their workspaces. But this advantage need some sensors to detect mobile robot's position and find their goal point. This article describe the navigation teaching method of mobile robot using omni-directional position detection system. This system offers the brief position data to a processor with simple devices. In other words, when user points a goal point, this system revise the error by comparing its heading angle and position with the goal. For these processes, this system use a conic mirror and a single camera. As a result, this system reduce the image processing time to search the target for mobile robot navigation ordered by user.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1915-1923
• /
• 2011

For automated guidance control of a magnetically guided-all wheel steered vehicle, it is necessary to have information about position and orientation of the vehicle, and deviations from the reference path in real time. The magnet reference system considered here consists of three magnetic sensors mounted on the vehicle and magnetic markers, which are non-equidistantly buried in the road. This paper presents an observer to estimate such position and orientation at the center of gravity of the vehicle. This algorithm is based on the simple kinematic model of vehicle and uses the data of wheel velocity, steering angle, and the discrete measurements of marker positions. Since this algorithm requires the exact values of initial states, we have also proposed an algorithm of determining the initial position and orientation from the 16 successive magnet pole data, which are given by the magnetic measurement system(MMS). The proposed algorithm is capable of continuing to estimate for the case that the magnetic sensor fail to measure up to three successive magnets. It is shown through experimental data that the proposed algorithm works well within permissible error range.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1071-1076
• /
• 2011

NC machines are generally used for machining operations because of their position accuracy, path accuracy, and machining reaction force. However, some NC machines require a very large space and are expensive. Recently, industrial articulated robot arms with large handling capability and wrist torque have been developed and the corresponding sensor technology has been improved. A machining robot for three-dimensional large curved objects was developed on the basis of an automatic-path-generation method. A self-position-compensation method with a laser displacement sensor was adopted for the six-axis robot developed, because the large articulated robot arms had poor position accuracy. An automatic-path-generation method using specific points was adopted to reduce the number of teaching points and time. In order to determine the proper machining conditions, various machining conditions such as tool rotation speed, cutting angle, cutting depth, and tool moving speed, were evaluated.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.72-77
• /
• 2010

This paper presents a method for measuring the shaft power of a marine main engine. Usually, in traditional systems for measuring shaft power, a strain gauge is used even though it has several disadvantages. First, it is difficult to set up the strain gauge on the shaft and acquire the correct signal for analysis. Second, it is very expensive and complicated. For these reasons, we investigated alternative approaches for measuring shaft power and proposed a new method that uses a vision-based measurement system. For this study, templates for image processing and CCD cameras were installed at the both ends of the shaft. Then, in order for the cameras to capture the images synchronously, we used a trigger mark and a optical sensor. The position of each template between the first and the second camera images were compared to calculate the torsion angle. The proposed measurement system can be installed more easily than traditional measurement systems and is suitable for any shaft because it does not contact the shaft. With this approach, it is possible to measure the shaft power while a ship is operating.

• Journal of Biosystems Engineering
• /
• v.27 no.2
• /
• pp.79-88
• /
• 2002

This study was conducted to develop system for high speed rice transplanting machines. The control system includes a sensor detecting the tilt angle of the seedling bed, a micro-controller and a hydraulic system consisting of a double acting cylinder, a four-way three-position solenoid valve, a relief valve and a hydraulic pump. The levelling system shared the pump with the existing steering control, resulting in a tandem center circuit for the steering and levelling control systems. Using the input signal from the sensor, the micro-controller determined and generated the output signal to control the cylinder through the solenoid valve to keep the seedling bed always parallel to the water surface regardless of soil unevenness during the transplanting operations. Both an ON/OFF and a PWM control schemes were tested. When the flow rate was more than 1 ι/min in the ON/OFF control, the system showed unstable rolling. However, in the PWM control, the system worked stably although the flow rate was more than 1 ι/min. The PWM control showed a better performance when a large difference between the angle and the dead band of the control system occurred. The characteristics of tile system response to given tilt angles were predicted by a computer simulation. Both the ON/OFF and the PWM control systems worked well providing that the operating and waiting times were properly adjusted.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.943-944
• /
• 2011

The position of the rotor in a spherical motor is usually measured by encoders. When using a encoder, It is possible to measure the angle in a very high resolution. However it is limited to measure a single-DOF using one encoder. So it is required to use 3 encoders to measure a 3-DOF. In order to connect the encoder and the motor, an additional mechanic linkages. Because of these reasons, it is difficult to apply it in various systems. Where the friction and inertia is increased when operating the motor. It could cause a negative effect in dynamic characteristic. In this paper present dual-image sensing system capable of measuring 3-DOF motions in real time eliminating the mechanical linkages. In addition we offer methods of converting sensors outputs to rotation angle which is used in the controller.