• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.6
• /
• pp.571-578
• /
• 2012

In the paper, we proposed a ring type structured light image based embedded ranging sensor for a mobile robot. Since the proposed ranging sensor obtains omnidirectional object distance, it is useful for autonomous navigation of a mobile robot. By matching the local omnidirectional distance map with a given global object map, it is possible to get position and heading angle of mobile robot in the global coordinates. Experiments for matching and navigation were carried out to verify the performance of the proposed ranging sensor.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.278-284
• /
• 2010

Indoor localization for pedestrian is the key technology for caring the elderly, the visually impaired and the handicapped in health care districts. It also becomes essential for the emergency responders where the GPS signal is not available. This paper presents newly developed pedestrian localization system using the gyro sensors, the magnetic compass and pressure sensors. Instead of using the accelerometer, the pedestrian gait is estimated from the gyro sensor measurements and the travel distance is estimated based on the gait kinematics. Fusing the gyro information and the magnetic compass information for heading angle estimation is presented with the error covariance analysis. A pressure sensor is used to identify the floor the pedestrian is walking on. A complete ambulatory system is implemented which estimates the pedestrian's 3D position and the heading.

• Journal of Sensor Science and Technology
• /
• v.27 no.3
• /
• pp.165-169
• /
• 2018

A single-axis Cubli frame realized simply with an IMU sensor and DC motor is presented herein. To maintain the balance on the Cubli frame, an LQR controller based on a Lagrangian derivation of the dynamics was designed, which utilized the state variables of the frame angle and its angular acceleration, as well as the wheel angle and its angular acceleration. The designed LQR controller showed a settling time balancing capability of approximately two seconds and 40% of the maximum overshoot in Matlab/Simulink simulations. Our experimental results of the fabricated Cubli frame matched with the simulation results. It maintained balancing at the reference position even though an initial offset as well as external disturbance during the balancing was applied.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.783-786
• /
• 1991

Generally, The position of mobile robot moving on the plane is measured by the method of dead reckoning, using the encoder system coupled on a wheel axis. But it is noted that the encoder system cannot check the slip of a wheel, often occurring in tracking of the mobile robot. In this study, using velocity angular velocity sensor with a tuning fork vibration system, the system is developed which can measure the directional angle of positional variables on the mobile robot. By measuring the variations of tracking direction mobile robot equipped with this system, following result is found; In spite of the slip at a wheel when measuring the tracking directional angle, the error occurs in the range of .+-. 1 (degree).

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.158-163
• /
• 2013

The fusion of the GPS (Global Positioning System) and DR (Dead Reckoning) is widely used for position and latitude estimation of vehicles such as a mobile robot, aerial vehicle and marine vehicle. Among the many types of aerial vehicles, grater focus is given on the quad-rotor and accuracy of the position information is becoming more important. In order to exactly estimate the position information, we propose the fusion method of GPS and Gyroscope sensor using the DEKF (Dual Extended Kalman Filter). The DEKF has an advantage of simultaneously estimating state value and a parameter of dynamical system. It can also be used even if state value is not available. In order to analyze the performance of DEKF, the computer simulation for estimating the position, the velocity and the angle in a circle trajectory of quad-rotor was done. As it can be seen from the simulation results using own proposed DEKF instead of EKF on own fusion method in the navigation of a quad-rotor gave better performance values.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.744-749
• /
• 2012

In this paper, we suggest that how to improve an accuracy of mobile robot's localization by using the sensor network information which fuses the machine vision camera, encoder and IMU sensor. The heading value of IMU sensor is measured using terrestrial magnetism sensor which is based on magnetic field. However, this sensor is constantly affected by its surrounding environment. So, we isolated template of ceiling using vision camera to increase the sensor's accuracy when we use IMU sensor; we measured the angles by pattern matching algorithm; and to calibrate IMU sensor, we compared the obtained values with IMU sensor values and the offset value. The values that were used to obtain information on the robot's position which were of Encoder, IMU sensor, angle sensor of vision camera are transferred to the Host PC by wireless network. Then, the Host PC estimates the location of robot using all these values. As a result, we were able to get more accurate information on estimated positions than when using IMU sensor calibration solely.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.755-762
• /
• 2014

In recent year, along with the rapid development of LED technology, many applications using LEDs with Visible Light Communication(VLC) have been researched. Since it is easy to provide LOS communication environment along with cheap deployment cost, the indoor positioning system based on VLC has been actively studied. In this paper, we propose an accurate indoor positioning algorithm using a stereo image sensor and white-light LEDs with the visible light communication. Indoor white-light LEDs are located at the ceiling of a room and broadcast their position information by VLC technology. Mobile receiver with stereo image sensor receives LED position information by VLC and estimates its position and angle information. Simulation results are given to show the efficiency of proposed indoor positioning algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.135-141
• /
• 2021

Interest is growing in the design and development of square wave driven BLDC permanent magnet motors suitable for industrial automation, and the development of position detection circuits and drivers. However, this motor is somewhat limited in its application despite the price and functional advantages due to the decrease in efficiency due to switching loss and vibration and noise. In the process of designing and assembling a BLDC motor, the magnetic pole angle is not uniform or the magnetic flux distribution is distorted due to problems in magnetic circuit design or product non-uniformity in the assembly process. Therefore, these things cause position detection deviation and deteriorate the motor characteristics. In addition, the sine wave driven BLDC system can operate stably only when the signal generated from the position sensor is accurately fed back to the driver. However, since the generated signal cannot perform stable position detection due to the occurrence of DC offset component due to magnetic flux density deviation or magnetization technology, which is an external influence, this study intends to study the proposed circuit that can remove the DC offset component.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1103-1109
• /
• 2014

The motion recognition system has been broadly studied in digital image and video processing fields. Recently, method using th depth image is used very useful. However, recognition accuracy of depth image based method will be loss caused by size and shape of object distorted for angle of the depth sensor. Therefore, distortion correction of depth sensor is positively necessary for distinguished performance of the recognition system. In this paper, we propose a pre-processing algorithm to improve the motion recognition system. Depth data from depth sensor converted to real world, performed the corrected angle, and then inverse converted to projective world. The proposed system make progress using the OpenCV and the window program, and we test a system using the Kinect in real time. In addition, designed using Verilog-HDL and verified through the Zynq-7000 FPGA Board of Xilinx.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.327-333
• /
• 2011

Intelligent robots are widely needed in various areas of industry from extremely dangerous environments to service tasks. For autonomous mobile robots, it is significant to move itself safely to a destination point, recognizing its surroundings. Advances in sensor technology and its applications are achieved in order to develop an intelligent robot. In this paper, a mobile robot with a path-finding algorithm is presented. The path-finding algorithm is the one that does not only find a path to designated destination and also recognizes obstacles on the way, calculating its distance. 10 ultrasonic sensor are mounted on the front and rear of the mobile robot to figure out its position. Specular reflection and wide viewing angle, which are inherent characteristics of ultrasonic waves, cause errors in measuring distance.