• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.82-86
• /
• 2004

A fuzzy rule-based hand-motion estimation algorithm is proposed for a 6 dimensional spatial tracker in which low cost accelerometers and gyros are employed. To be specific, beginning and stopping of hand motions needs to be accurately detected to initiate and terminate integration process to get position and pose of the hand from accelerometer and gyro signals, since errors due to noise and/or hand-shaking motions accumulated by integration processes. Fuzzy rules of yes or no of hand-motion-detection are here proposed for rules of accelerometer signals, and sum of derivatives of accelerometer and gyro signals. Several experimental results and shown to validate our proposed algorithms.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1655-1664
• /
• 2007

This paper presents the problem of controlling asynchronous sequential machines in the presence of input disturbances, which may be also regarded as an adversary in a game theoretic setting. The main objective is to develope a new methodology for including unpredictable behavior of input disturbance into models of asynchronous machines. The input disturbance, representing uncontrollable noise input, is embedded into a new model of asynchronous machines in form of input/state finite state machines. It is shown that the proposed modeling preserves the fundamental model and well-pose of asynchronous machines. The reachability matrix, an important performance index of asynchronous machines, is also adapted according to input disturbance and will be used for constructing corrective controllers in the companion paper.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.164-172
• /
• 2000

To follow a moving target keeping a certain distance it is essential for a mobile robot to detect the target first and to measure its pose and velocity. This paper proposes a new solution for this problem using the accumulated ultrasonic image which is constructed by accumulating the returned ultrasonic signal along the time axis for a certain number of measurement periods. A moving target is separated by selecting the trajectory whose inclination is different from others in the imag since the inclination of a trajectory represents the relative speed of the target against the mobile robot. The proposed algorithm was implemented on a mobile robot and has shown that the robot follows a moving target successfully.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1062-1067
• /
• 2005

This paper discusses a skeleton feature extraction method for ubiquitous robot system. The skeleton features are used to analyze human motion and pose estimation. In different conventional feature extraction environment, the ubiquitous robot system requires more robust feature extraction method because it has internal vibration and low image quality. The new hybrid silhouette extraction method and adaptive skeleton model are proposed to overcome this constrained environment. The skin color is used to extract more sophisticated feature points. Finally, the experimental results show the superiority of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1045-1050
• /
• 2005

This paper describes a design experience of a low-cost 6 DOF spatial tracker system where relative low accuracy and relatively long ranges, wireless communication will be achieved by means of low cost accelerometers and gyros with contemporary microprocessor. However, there are two key problems; one is the bias drift problem and the other is that single or double integration of acceleration signal suffers not only from noise but also from nonlinear effects caused by gravity. To be specific, beginning and stopping of hand motions needs to be accurately detected to initiate and terminate integration process to get position and pose of the hand from accelerometer and gyro signals, since errors due to noise and/or hand-shaking motions accumulated by integration processes. Several experimental results are shown to validate our proposed algorithms.

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.363-368
• /
• 2007

Most surgery illumination systems have been developed as passive systems. However, sometimes it is inconvenient to relocate the position of the illumination system whenever the surgeon changes his pose. To cope with such a problem, this study develops an auto-illumination system that is autonomously tracking the surgeon's movement. A 5-DOF serial type manipulator system that can control (X, Y, Z, Yaw, Pitch) position and secure enough workspace is developed. Using 3 ultrasonic sensors, the surgeon's position and orientation could be located. The measured data aresent to the main control system so that the robot can be auto-tracking the target. Finally, performance of the developed auto-illuminating system was verified through a preliminary experiment in the operating room environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.164-170
• /
• 2011

This paper proposes a novel monocular vision-based SLAM (Simultaneous Localization and Mapping) method using both position and orientation information of ceiling lamps. Conventional approaches used corner or line features as landmarks in their SLAM algorithms, but these methods were often unable to achieve stable navigation due to a lack of reliable visual features on the ceiling. Since lamp features are usually placed some distances from each other in indoor environments, they can be robustly detected and used as reliable landmarks. We used both the position and orientation of a lamp feature to accurately estimate the robot pose. Its orientation is obtained by calculating the principal axis from the pixel distribution of the lamp area. Both corner and lamp features are used as landmarks in the EKF (Extended Kalman Filter) to increase the stability of the SLAM process. Experimental results show that the proposed scheme works successfully in various indoor environments.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.3
• /
• pp.434-443
• /
• 2008

This paper develops a novel automatic parking algorithm based on a fuzzy logic controller with the vehicle pose for the input and the steering rate for the output. It localizes the vehicle by using only external sensors - a vision sensor and ultrasonic sensors. Then it automatically learns an optimal fuzzy if-then rule set from the training data, using an evolutionary fuzzy system. Furthermore, it also finds the green zone for the ready-to-reverse position in which parking is possible just by reversing. It has been tested on a 4-wheeled Pioneer mobile robot which emulates the real vehicle.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.580-583
• /
• 2002

This paper presents a novel pose description corresponding to the structure characteristics of parallel manipulators, which is convenient and intuitionistic to us. A class of 3-RSR parallel manipulator is considered here. Through analysis on geometry theory, we obtain a new method of the closed-form solution to the forward kinematics. The closed-form solution contains two different meanings-analytical and real-time. So we reach the goal of practical application and control. A numerical example is also presented and are verified by an inverse kinematics analysis. It shows that the method has a practical value for real-time control.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.269-270
• /
• 2017

본 연구에서는 부력조형물이 정해진 위치에서 사용자가 원하는 자세를 유지할 수 있는 시스템을 연구하였다. 기존의 부력조형물은 로프를 이용한 고정식이었지만 본 기술이 적용된 부력조형물은 로프 없이 스스로 부력에 의한 공중부양과 사용자가 원하는 자세를 취할 수가 있도록 구성하였다. 이러한 시스템은 주로 홍보용으로 널리 사용되며 박람회, 제품 설명회, 지역축제, 예술 등 많은 분야에 적용이 가능하다. 부력조형물이 자세를 유지하기 위하여 드론 기술에 적용되는 IMU 센서를 이용한 방향과 자세정보와 6개의 BLDC 모터에 8인치 프로펠러를 접합시켜 부력조형물이 상하좌우로 이동이 가능하도록 자세 제어장치를 구성하였으며 실험을 통하여 시스템의 검증하였다.