• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.13-35
• /
• 2011

The advancement of the information technology provides a wide range of corporate to cope with new business environments that are different in size, life and operation conditions. The Research methodology used in this study is Technology Acceptance Model. The Study Method are mainly survey and questionnaire. The major result of article can be summarized. Its are as the follows: This paper ware investigated the determinants of 'port service quality', 'perceived usefulness', 'perceived ease of use', 'utilization intention', 'practice use'. There are 400 sended samples and 150 returns, 173 of them are analyzed on a port utilization using TAM model. 1. The Port service quality are found to have a positive effect to 'perceived usefulness', 'perceived ease of use', 'utilization intention' 2. The perceived ease of use are found to have a positive effect to 'perceived usefulness', 'utilization intention' 3. The perceived usefulness is found to be positively related to 'utilization intention' 4. The utilization intention is found to have a positive effect to ''practice use' we hove to provide useful contribution to increase the Korea ports' competitiveness in introduction of port information system. In addition, in order to port development offer some insight in further research.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.861-866
• /
• 2015

This study was aimed to detect area of Submaine Groundwater Discharged(: SGD) around Jeju island using by remote sensing. Sea Surface Temperature(SST) was identified using IR camera on Unmaned Aerial Vehicle(UAV) at Gimnyeong port in study area. Then SGD location was detected by comparing range of SGD temperature. Generally, range of SGD temperature is distributed 15 to 17 like underground water. The result, SGD location was detected by SST distribution of Gimnyeong port recorded by IR camera in the southwest of study area.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.81-89
• /
• 1996

Quantum RF impedance of SIS (superconductor insulator superconductor) junction has been analyzed by using through on tucker's quantum mixer theory in the frequency range form 80 GHz to 120 GHz. The embedding impedance of waveguide-type mixer mount and its equivalent circuit have been evaluated. From these evaluated results, the impedance matching efficiency between mixer mount embedding impedance and mixer port impedance of upper-side band and IF which were determined by augmented admittance matrix with given backshort position has been discussed in detail. It is found that the mixer with fixed backshort mount ahs a impedance matching efficiency about 80% at each port of mixer within 85GHz to 115GHz, which implys a conversion los of mixer would be good enough to be operated such a wide band frequency range. Therefore, the theoretical evaluated results show that our method can be used ot design the mixer mount without any mechanical tuning elements such a backshort or an E-plane tunners for wide band operation.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.835-840
• /
• 2009

In this paper, confined multiple slot jet impingement with exhaust ports is investigated numerically. A flow cell, defined as volume sectioned by the impingement and confinement surfaces and the centerlines of adjacent nozzle and exhaust port, is chosen for computational domain. The effects of Reynolds number and geometrical parameters on the heat transfer performance and the flow characteristics are studied. For turbulence, the Abe-Kondoh-Nagano version of the low-Reynolds k-$\varepsilon$ model is employed. The results showed that the local Nusselt number distribution is shifted down and show poor heat transfer performance for small Reynolds number and small ratio of the lateral and axial length of flow cell. The rest of range, except the range of the shift phenomenon, can be classified into three groups by heat transfer characteristics.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.219-221
• /
• 2014

The objective of this paper is to simulate the dynamic behavior of a floating structure model, using image processing and close-range photogrammetry, instead of the contact sensors. Previously, the movement of structure was presented through the exterior orientation estimation of a single camera by space resection. The inverse resection yields the 6 orientation parameters of the floating structure, with respect to the camera coordinate system. The single camera solution is of interest in applications characterized by restriction in term of costs, unfavorable observation conditions, or synchronization demands when using multiple cameras. This article discusses the theoretical determinations of camera exterior orientation based on Direct Linear Transformation and photogrammetric resection using least squares adjustment. The proposed method was used to monitor the motion of a floating model. The results of six degrees of freedom (6-DOF) by inverse resection show that the appropriate initial values by DLT can be effectually applied in least squares adjustment, to obtain the precision of exterior orientation parameters. Additionally, a comparison between the close-range photogrammetry and total station results was feasibly verified. Therefore, the proposed method can be considered as an efficient solution to simulating the movement of floating structure.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.4
• /
• pp.124-129
• /
• 2008

Design practice has been made on an oil-less scroll air compressor as an air supply device for a 2 kW fuel cell system where air pressure of 2 bar and flow rate of 120 liter/min are required. Basic structure of the scroll compressor includes double-sided scroll wrap for the orbiting scroll driven by two crankshafts connected to each other by a timing belt. These features can eliminate thrust surface which otherwise would produce frictional heat and jeopardize reliable operation of the orbiting scroll and the scroll element's deformation as well. This study focuses on optimum scroll wrap design; orbiting radius has been chosen as an independent design parameter. As the orbiting radius changes, scroll sizes such as scroll base plate and discharge port diameters change accordingly. Gas compression-related losses and mechanical loss also change with the orbiting radius. With a scroll base plate diameter of 120mm at most and discharge port of at least 10mm, the orbiting radius should be within the range of 2.5-4.0mm. With this range of the orbiting radius, it was estimated by performance analysis that the compressor efficiency reached to a maximum of ${\eta}_c$=96% at the orbiting radius of $r_s$=3.5mm for the scroll wrap height-to-thickness ratio of h/t=5.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.877-882
• /
• 2016

In this paper, a novel CMOS high Q factor 2-port active inductor has been proposed. The proposed circuit is designed by cascading basic gyrator-C structural active inductors and attaching the feedback LC resonance circuit. This LC resonator can compensate parasitic capacitance of transistor and can improve Q factor over wide frequency range. The proposed circuit was fabricated and simulated using 65 nm Samsung RF CMOS process. The fabricated circuit shows inductance of above 2 nH and Q factor higher than 40 in the frequency range of 1~6 GHz.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.271-275
• /
• 2006

This paper describes the design and realization of full attitude system based on MEMS IMU and GPS carrier phase. The work can be divided into two parts: First, initial heading is determined by using two GPS receivers. And this paper discusses the usage of space geometry conditions to reduce the range of ambiguity search. The method presented in this paper was tested on the static. On the static condition, an accuracy better than 0.06 degrees for heading for 3.48m long baseline has been achieved. Integration of GPS and low cost MEMS IMU are used to realize the real-time heading attitude system. Second, level attitude (pitch and roll) is determined using the method of frequency-velocity for the feedback control. At the same time, the method using the attitude based on MEMS IMU to help determination of the range of ambiguity search is proposed. The results done on the sea show that an alternative means to provide real-time, cost-effective, accurate and reliable attitude information for attitude surveys. Though motivated by a big ships application, the design can be applied to other vehicles.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.297-301
• /
• 2006

There are more than thirty continuously recording GPS stations (CORS) have been set up at different geological sites and distributed throughout a 140 km by 140 km area in southern Taiwan beginning since 2000, and the amount of the CORS are still under increasing in this area which is recognized the suture zone between the Philippe sea plate and Eurasia plate. From the year 2000 to the end of 2005, we analyze the daily solutions to obtain the average station velocities before and after the Chengkung earthquake which occurred near eastern Taiwan at 04:38 UTC on 10 December 2003. After considering the effects of the coseismic and postseismic displacements, the difference of the horizontal components reaches 13 mm/year of the average station velocity happened in the east side of the Central Range. To the vertical component, all of the stations are risen which located in the Coastal Range, and the largest difference approaches 20mm/year.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.163-168
• /
• 2005

Loran-C(Long Range Navigation) is the only stand alone navigation system of the world Ministry of Maritime Affairs and Fisheries(MOMAF} of Korea is operating the Korea Chain(GRI : 9930, Master station : Pohang, slave station : Kwangju, Gessashi; Nijima, Ussurisk) around the country. Due to decreasing the users and being antiquated New Loran System is being developed in United States. In this study, the policy establishment of Loran-C in Korea is suggested.