• 제목/요약/키워드: Port concentration

검색결과 234건 처리시간 0.079초

북극해 운항 중 계측된 빙하중에 대한 분석 연구 (A Study on Analysis of Ice Load Measured during the Voyage in the Arctic Sea)

  • 이탁기;김태욱;임채환;김흥섭
    • 대한조선학회논문집
    • /
    • 제51권2호
    • /
    • pp.107-113
    • /
    • 2014
  • The icebreaking research vessel, ARAON had her second ice trial in the Arctic Sea from 16th July to 12th August 2010. During the voyage, the local ice loads acting on the bow of port side were measured from 14 strain gauges. The measurements were also carried out in ice waters with various ice concentration ratio as well as the icebreaking performance tests. In this study, the ice loads measured during the 'general' operation in ice waters were analyzed. As a first step, the relationship between the location of strain gauges and the ice loads were investigated, and then the possibility for observation of higher ice loads was estimated based on the probability density function. The relationship between the ship speed and the ice load was also investigated. 718 peak stresses data higher than 20 MPa obtained from strain gauges array attached in longitudinally and vertically was analyzed. In general, the ice load increases as the ship speed increases in the low ship speed range, and ice load decreases as the ship speed is greater than a certain speed.

해수 및 대기 중 DMS의 분석 : 마산만을 중심으로 (Dimethylsulfide (DMS) in Seawater and the Overlying Atmosphere of the Masan Bay)

  • 김기현;오재룡;강성현;이수형;이강웅
    • 한국대기환경학회지
    • /
    • 제12권4호
    • /
    • pp.495-504
    • /
    • 1996
  • The concentrations of dimethylsulfide (DMS) were determined from both seawater and the overlying atmosphere from a station located in the Masan Bay area during a ten-day field campaign period of January 1996. The resulting data were also used to derive saturation ratios (SR) as well as sea-to-air fluxes of DMS. The concentrations and fluxes of DMS for both reservoirs varied extensively over two to three orders of magnitude: DMS in air and seawater were measured at 9 to 4,300 pptv (mean: 600 $\pm$ 1, 170, N=18) and at 0.24 to 10 nM (4.0 $\pm$ 3.4, N=13), respectively, while its fluxes were found from 0.02 to 23 mol $m^{-2} day^{-1} (3.1 \pm 6.8, N=11)$. A comparative analysis between our data and previously reported ones indicate that its atmospheric concentrations are abnormalously high, but its seawater counterparts are slightly lower than expected. In light of high pollution levels of organic-rich materials in and the associated high biological productivity of the study area, the sea-to-air-fluxes derived are notably low relative to those values typically reported from the coastal areas. These complicated features of DMS distributions/fluxes in the study site indicate that the near-by port- based anthropogenic activities from various industrial plants strongly interfere with natural processes leading to the production and release of DMS. It was however striking to find out relatively strong signals of diel cycle in its saturation ratios, concentration gradients between seawater and atmosphere, and the associated fluxes. Although it is yet difficult to provide meaningful explanations for the observed phenomena, the existence of clear diel cycle in some DMS-related parameters suggests that the natural processes may nonetheless exert important controls on the regional cycling of atmospheric sulfur species, of particular DMS.

  • PDF

해양환경 중 Zn-mesh를 적용한 콘크리트 슬랩의 음극방식 특성 (Cathodic Protection of Reinforced Concrete Slab with Zn-Mesh in Marine Environment)

  • 김기준;정진아;이우철
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.1065-1068
    • /
    • 2008
  • 해상교량은 바다에 노출되기 때문에 많은 경우 본래의 설계수명을 다하지 못하고 조기에 열화된다. 이러한 콘크리트 열화는 다공성인 콘크리트 내부에 염분이 침투함으로써 철근부식을 야기하고, 부식된 철근은 보통 $6{\sim}10$배까지 부피가 팽창하면서 콘크리트에 균열을 일으키고 결국 탈락(박리)으로 이어진다. 이와 같은 철근부식과 균열발생의 가속화는 구조물의 심각한 손상과 궁극적으로 붕괴까지 이어질 수 있다. 따라서 이러한 피해를 막기 위해서는 콘크리트 내 철근부식의 정확한 이해가 필요하며, 부식발생의 정량화에 의한 예측은 물론 적절한 방식법을 적용해야한다. 음극방식법은 비교적 최근에 개발된 철근콘크리트 구조물의 방식법 중 하나이며 요즈음도 해외 여러 나라에서 이에 대한 방식시스템 연구가 활발하다. 본 연구에서는 해상교량이나 항만부두 구조물의 상판부에 대한 예비실험 성격으로 슬랩 시험편(40cm ${\ast}$ 30cm ${\ast}$ 18cm)을 채택하였다. 시험환경은 15% 염분과 온도 $40^{\circ}C$의 가속화된 해양환경이었으며, 시험 기간 동안 주기적인 건습 반복을 실시하였다. 방식시험편은 음극방식 기술의 하나인 Zn-mesh에 의한 희생양극식을 채택하였다. 연구내용으로는 음극방식에 의한 방식성능을 관찰하였으며 신설구조물과 보수구조물에 대한 방식 효과를 비교하였다.

  • PDF

Mixer design for improving the injection uniformity of the reduction agent in SCR system

  • Hwang, Woohyeon;Lee, Kyungok
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권1호
    • /
    • pp.63-69
    • /
    • 2017
  • In this paper, we propose a method to optimize the geometry and installation position of the mixer in the selective catalytic reduction (SCR) system by computational fluid dynamic(CFD). Using the commercial CFD software of CFD-ACE+, the flow dynamics of the flue gas was numerically analyzed for improving the injection uniformity of the reduction agent. Numerical analysis of the mixed gas heat flow into the upstream side of the primary SCR catalyst layer was performed when the denitrification facility was operated. The characteristics such as the flow rate, temperature, pressure loss and ammonia concentration of the mixed gas consisting of the flue gas and the ammonia reducing gas were examined at the upstream of the catalyst layer of SCR. The temperature difference on the surface of the catalyst layer is very small compared to the flow rate of the exhaust gas, and the temperature difference caused by the reducing gas hardly occurs because the flow rate of the reducing gas is very small. When the mixed gas is introduced into the SCR reactor, there is a slight tendency toward one wall. When the gas passes through the catalyst layer having a large pressure loss, the flow angle of the exhaust gas changes because the direction of the exhaust gas changes toward a smaller flow. Based on the uniformity of the flow rate of the mixed gas calculated at the SCR, it is judged that the position of the test port reflected in the design is proper.

Simulated Moving Bed Chromatography의 시각적 설명 (Visual Demonstration of Simulated Moving Bed)

  • 오난숙;이종호;김진일;구윤모
    • Korean Chemical Engineering Research
    • /
    • 제43권3호
    • /
    • pp.360-365
    • /
    • 2005
  • SMB는 연속 크로마토그래피 공정으로써 회분식 크로마토그래피보다 이동상의 소비를 줄이고 높은 농도, 높은 수율의 생산성의 장점을 가지고 있다. 그러나 운전상의 복잡성 때문에 이 공정을 이해하기 어렵다. 본 실험에서는 서로 다른 색깔을 지닌 두 물질의 분리를 시도함으로써 공정의 이해를 용이하게 하였다. 실험에서 사용된 물질은 Blue dextran과 Orange G로서 각각 파란색과 오렌지 색을 띤다. 실험은 4개의 존으로 구성된 SMB로써 zone VI에서 zone I으로 재순환 되지 않는 열린 루프계가 적용되었다. 운전 조건은 Standing wave design를 이용하였으며 extract와 raffinate에서 높은 순도와 수율을 가질 수 있도록 디자인하였다. 단일 칼럼을 이용한 실험을 통해서 여러 유량에서 비선형 흡착 평형식과 실험식으로부터 물질전달계수를 얻었다. Extract와 raffinate의 농도분포 곡선은 모사 결과와 거의 일치하였다. Extract와 raffinate의 순도는 99.49%와 98.89%이며 두 물질의 수율은 모두 98%였다.

순산소와 Vortex Aerator를 이용한 도심하천의 수질 및 악취 관리 (Urban Streams' Water Quality and Odor Control Using Pure Oxygen and Vortex Aerator)

  • 윤다인;최미정;박성혁
    • 대한토목학회논문집
    • /
    • 제41권5호
    • /
    • pp.493-504
    • /
    • 2021
  • 와류에 의해 물과 산소의 충돌을 반복적으로 일으켜 산소를 용존시키는 Multistage Vortex Aerator를 하천 정화에 적용하였다. 본 연구의 대상 현장인 괴정천은 부산시 사하구 도심을 흘러 낙동강 하구로 연결되는데, 우천 시에는 비점 오염물질이 유입되고 평시에도 하수 슬러지가 일부 유입되어 퇴적을 반복함에 따라 하천수의 용존산소 농도가 혐기성 상태에 가까웠다. 산소농도가 최소 0.1 ppm인 하천수를 흡입하여 22 ppm 이상으로 산소를 용존시켜 분당 1 m3을 순환시켰을 때, 하천에 나타나는 수질과 악취 변화를 2개월간 모니터링하였다. 운영 결과, 용존산소가 하천 전체적으로 약간 나쁨(4)~나쁨(5)에서, 좋음(1b)~보통(3) 등급으로 개선되었고, 총인 농도는 평균 76 % 감소되었다. 복합악취는, 하천 전체가 혐기화된 측정일에 최대 84.5 % 저감을 관찰할 수 있었다.

식물정유와 광촉매를 이용한 흡수제 제조 및 VOCs 제거특성에 관한 연구 (The Manufacture of Absorbents and Removal Characteristics of VOCs by Essential Oil and Photocatalyst)

  • 정해은;양경순;강민경;조준형;오광중
    • 청정기술
    • /
    • 제23권1호
    • /
    • pp.54-63
    • /
    • 2017
  • 산업발전과 공업화로 인해 VOCs의 발생이 증가하고 있고, VOCs는 불쾌감을 주며 불만을 불러일으키는 요인 중 하나이다. 이를 제어하기 위해 본 연구는 식물정유와 광촉매로 흡수제를 제조하여 벤젠과 톨루엔을 제거하고자 하였다. 식물정유물질 선정실험을 수행한 결과, 편백나무의 제거효율이 약 70%로 가장 높게 나타났으며, GC분석 결과 Monoterpene류와 Sesquiterpene로 이루어져 있음을 확인하였다. 광촉매 선정실험 결과, 광촉매 종류는 $TiO_2$의 효율이 가장 높게 나타났으며, UV lamp power는 10 W, $TiO_2$의 양은 $0.1gL^{-1}$부터 효율이 우수하게 나타났다. 수산화라디칼 생성특성 실험결과, $TiO_2$의 농도와 UV lamp power가 클수록 많은 양의 라디칼이 생성되었다. 제조된 흡수제의 제거효율 및 반응속도 실험결과, 제거효율은 최대 약 98%까지 나타났으며, 활성화 에너지는 약 $18kJmol^{-1}$로 나타났다.

강인한 바이오필터설계를 위한 바이오필터모델: 1. 바이오필터 담체의 흡착거동 (Biofilter Model for Robust Biofilter Design: 1. Adsorption Behavior of the Media of Biofilter)

  • 이은주;서교성;전위숙;임광희
    • Korean Chemical Engineering Research
    • /
    • 제50권1호
    • /
    • pp.149-154
    • /
    • 2012
  • 바이오필터담체가 충전된 흡착칼럼 운전 시의 흡착 및 탈착거동에 대하여 조사하였다. 에탄올을 휘발성유기화합물(VOC)로서 함유하는 폐가스를 처리하기 위한 연속동적흡착 실험을 바이오필터공정과 같은 90% 이상의 상대습도에서 수행하였다. 에탄올 1,000 ppmv(or 2,050 mg ethanol/$m^3$)를 포함하는 폐가스 2 L/min을 흡착칼럼에 공급하였을 때에 흡착칼럼 출구에서의 파과점과 흡착평형에 이르는 시간은 1단 시료구에서 보다 각각 10배와 3배 만큼 지연되었다. 한편 에탄올 2,000 ppmv(or 4,100 mg ethanol/$m^3$)를 포함하는 폐가스의 경우에는 각각 9배와 3배 지연되었다. 이와 같이 흡착칼럼 출구에서 지연기간의 비는 공급농도와 무관하게 서로 거의 일치하였음이 관찰되었다. 또한 1단 시료구와 출구에서 비교한 유입폐가스의 에탄올농도의 10%를 보이는 탈착시간 지연비도 약 1.5배로서 거의 일치하였다. 한편 미생물활성과 멸균공정의 흡착평형에 대한 영향에 대하여 조사하였다. 멸균된 입상 활성탄으로 충전된 vial의 기상 에탄올 농도는 멸균되지 않은 입상 활성탄으로 충전된 경우와 거의 일치하였다. 그러나 퇴비(compost)나 입상 활성탄/퇴비 혼합물의 경우에는 멸균 안한 경우가 멸균한 경우보다 기상에서의 에탄올 농도가 현저하게 높았다.

사전감지기술 및 송풍량 자동제어를 기반으로 한 저에너지 하수관리기술에 관한 연구 (Study on the Low Energy Sewage Management Based on Pre-sensing Technology and Automatic Blower Control)

  • 이승명;김한래;기경서
    • 환경영향평가
    • /
    • 제28권6호
    • /
    • pp.592-603
    • /
    • 2019
  • 본 연구는 하수처리시 가장 많은 에너지가 소비되는 송풍기의 효과적인 제어를 통한 저에너지 하수관리기술 구현에 관한 것으로, 미생물에 필요한 산소의 양을 산정함에 있어 생물반응조내 운전지표나 방류수의 원격수질감시체계(Tele-Monitoring System, TMS) 데이터를 활용하는 기존방식과 달리 하수처리 시설로 유입되는 하수의 CODcr, NH4+-N 농도변화를 유입단에서 미리 감지하여 송풍에너지를 절감하고자 하였다. 사용된 사전감지기술은 기존 상용화된 제품과 비교 시 높은 상관관계를 보였다. 사전감지기술과 연계하여 송풍기를 자동제어한 결과 인력에 의한 수동제어방식에 비해 평균 9.9%의 송풍에너지를 줄일 수 있음이 확인되었다. 이처럼, 유입단에서 유입하수를 사전감지할 경우 실시간으로 유입수질의 변동파악 및 송풍량 제어가 가능해져 인력에 의한 수동운전방식에 의존하고 있는 다수 하수처리시설에 적용시 저에너지 하수처리를 기대할 수 있으며, 이를 통해 온실가스 배출 절감에 기여할 수 있을 것으로 판단된다.

간척지 토양에서 양액의 전기전도도가 비트 및 순무의 생장에 미치는 영향 (Effects of Electro-conductivity on Growth of Beet and Turnip in the Reclaimed Land Soil)

  • 조지영;성호영;천진혁;박종석;박상언;박영준;김선주
    • 한국환경농학회지
    • /
    • 제37권3호
    • /
    • pp.197-206
    • /
    • 2018
  • BACKGROUND: The present study aimed to examine the crops capable of growing and adapting to the external environment and various stresses of reclaimed agriculture land for the development of high value-added agricultural utilization technology based on reclaimed land through standardization and empirical study of cultivation environment for cultivating crops. METHODS AND RESULTS: Two crops namely turnips and beets were selected for the salt tolerance test of soil environmental conditions on reclaimed land. Turnip and beet seedlings were planted on the soil collected at the 'Seokmun' reclaimed land. There are five treatments such as non-treatment, 1.0, 2.0 (control), 4.0 and $8.0dS{\cdot}m^{-1}$ of EC. The contents of betacyanin in beet roots was highest in control and decreased with increasing salt concentration. The GSL contents in the turnip roots waswere highest at EC 2.0 and decreased with increasing salt concentration, whereas those in turnip leaves waswere high both in the non-treated control and atthe EC 1.0-treatment. But, tThere was, however, no statistical differences among the treatments. CONCLUSION: The degree of salt tolerance of crops was examined, and the limit EC iswas expected to be $3.0{\sim}4.0dS{\cdot}m^{-1}$ as reported to date. If the soil improvement is performed and irrigation systems are used in the actual reclaimed land, the EC of supplied irrigation will be low, and desalination effecttreatment by the lower EC of the supplied irrigation on the soil will lead to more favorable soil condition of the rhizosphere and cultivation environment offor the crops than those in the port experiment. Therefore, monitoring the salinity, water content and ground water level will enable prediction of the rhizosphere environment, and setting up irrigation management and supplying irrigation will lead to crop cultivation results that are close to normal.