• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.23-29
• /
• 2001

This paper is the second of companion papers, which investigate port-masking effects on emission and fuel economy. Port-masking was applied to commercial SOHC 3-valve engine by inserting masking plates between manifold and port. To induce various conditions of stratification, six types of masking plates were applied. In this paper, main interest is focused on the influence of injection timing on emission and fuel economy. Various injection timing was applied to the six cases, under the stoichiometric and lean-limit air-fuel ratio. Under the stoichiometric condition, an explanation about the reason of the change in emission level due to injection timing change is given. It is observed that NOx emission under the LML condition varies significantly when the injection timing changes.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.42-49
• /
• 2011

To expand lean misfire limit and improve combustion stability, the effects of port masking were estimated to secure basic data for applying the mechanism to SI engine instead of asymmetrical port and port throttling devises. For this purpose, various shapes and ratios of masking plates were mounted between port and manifold. The masking effects were evaluated by mixture response test under various load and speed conditions. The results showed that lean misfire limits were expended and fast combustion was observed for all masking shapes and ratios, especially, the effect of diagonal 1/4 masking was remarkable. In conclusion, the port masking method could be easily applied to engine without redesign of port for improving part load performance.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.121-130
• /
• 2014

This paper is the second investigation on the effects of intake flow control methods on the part load performance in a spark ignition engine. In the previous work, two control methods, port throttling and masking, were compared with respect to lean misfire limit, fuel consumption and emissions. In this work, the effects of these two methods on EGR characteristics were studied and simultaneously the differences between EGR and lean combustion as a dilution method were investigated. The results show that EGR limit is expanded up to 23% and 3 ~ 5% improvement in the fuel consumption are achieved around 8 ~ 13% rates by the flow controls comparing with 10% limit and 1.5% reduction around 3% rate of non-control case. The masking method is more effective on the limit expansion than throttling as like as lean misfire limit; however there is no substantial difference in fuel consumptions improvement regardless the control methods except high load condition. Also it is observed that there exist critical EGR rates around which the combustion performance and NOx formation change remarkably and these rates generally coincide with optimum rates for the fuel consumption. In addition, dilution with fresh air is much more advantageous than that of the exhaust gas from the view point of dilution limit and fuel consumption, while utilization of the exhaust gas is more effective on NOx reduction in spite of considerably small dilution compared with the use of fresh air. Finally, the improvement of fuel consumption by massive EGR is highly dependent on the EGR limit at which the engine runs stably, therefore the stratified combustion technique might be a best solution for this purpose.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.196-203
• /
• 2000

In this study, the evaluation method of diffusion characteristics of Suspended Soli&SS) and the generation limit(source and thick) are investigated, which is significantly affecting on marine examined by construction works such as dredging and reclamation. Dispersion characteristics of SS is examined by hydraulic tests and numerical works in consideration with the Pusan Port. Hydraulic model test was performed in 2-D wave flume to find the limit wave conditon of re-suspension of solid as well as the time dependent characteristics of settlement The results obtainded in the study are as follows; 1) The quantituative evaluation af SS is the basic parameter of marine environmental impact assessment in related with the port development The SS increases as the water content of sea bed solid increases and the density decreases. 2) The sea bed solid in Sinsundai area, Pusan Port has the water content range of 83~157% 3) The ratio of suspension velocity against settlement velocity is about 0.25 and SS concentration converges as the wave heigh. 4) The SS increases 2 time when time step increases 3 time(10 sec to 30 sec) in numerical simulation It means that the effect of the time step should be checked in detail to stable. The diffusion The diffusion coefficient are Affiected senstively in the dispersion process while sea ved friction coefficinet have not strong relation in the simulated area

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3282-3287
• /
• 2007

Lean combustion is one of the most promising method for increasing engine efficiency and reducing the exhaust emission from SI gas engines. Due to the possibility of partial burn and misfire, however, under lean burn operation, stable flame kernel formation and fast burn rate are needed to guarantee a successful subsequent combustion. Experiment data were obtained on a single-cylinder CNG fueled SI engine to investigate the effect of direct injection, spark timing and variation of injection timing. Experimental results show that lean burn limit is ${\lambda}$=1.3 with port injection, and expansion of lean burn limit ${\lambda}$=1.4 with direct injection method, due to increase of turbulence intensity in cylinder and stratified charge. Combustion duration in lean region is improved by using the variation of injection timing.

• 융합정보논문지
• /
• 제9권9호
• /
• pp.38-43
• /
• 2019

본 논문에서는 IoT 기기에 내장되는 마이크로컨트롤러의 1개 아날로그 포트를 이용해 1개의 아날로그 입력과 2개의 디지털 스위치 입력을 각각 입력받을 수 있는 방법을 제시하였다. 제시한 방법은 아날로그 입력포트의 입력전압 범위 중 상한선과 하한선을 정해 이 구간은 아날로그 입력 전압을 입력받고, 디지털 스위치들은 각각 상한선과 하한선의 경계를 초과하도록 구성하였다. 제시한 방법의 성능을 입증하기 위해 마이크로컨트롤러를 이용해 회로를 구성하고 실험하였으며, 그 결과 3종류의 입력들이 모두 1개의 아날로그 포트를 이용해 각각 감지할 수 있으므로 본래 필요했던 3개의 입력포트가 1개의 입력포트로, 즉 33%로 줄어드는 효과가 나타남을 확인하였다.

• 해양환경안전학회지
• /
• 제25권3호
• /
• pp.313-319
• /
• 2019

As vessels become larger and competition between ports intensifies, there has been an increase in the number of cases where vessels that exceed the available berths are berthed at the pier. Therefore, there has been an increase in the number of cases in which the bow or stern of a ship is projected and moored. The risk of overhanging berthing is that mooring safety can be compromised because it is not possible to connect the bow and stern mooring line to the ship properly. In addition, collision accidents may occur between moving vessels if the view of a vessel moving in the port is obstructed. Therefore, in this study, the simulation of mooring safety was performed according to the overhanging range in Piers No. 6 and 7 in Ulsan's main port to propose the overhanging limit and operational standards according to each ship. As a result of the assessment, 30,000 DWT bulkers are able to overhang up to 0.75B, and 50,000 DWT bulkers can overhang up to 0.50B. The results of this study are expected to be used as basic data for setting the allowable overhang limit, as well as clear usage criteria for safe unloading operations.

• 한국정보통신학회논문지
• /
• 제10권5호
• /
• pp.975-982
• /
• 2006

해양수산부는 정보통신기술발전과 정보인프라 특히 유 무선통합통신환경으로 급속히 변하고 있는 환경에 대응하기 위해서 또한, 기존의 웹 기반 Port-MIS시스템의 한계를 극복하기 위하여 최초로 모바일 기술을 활용한 모바일 Port-MIS 민원처리 시스템(이하, 모바일 Port-MIS)을 개발하여 운영하고 있다. 이 시스템은 새로운 시스템이기 때문에 서비스 초기에 많은 문제점과 저항이 있을 것으로 예상된다. 그래서 본 연구에서는 현재 신규 개발 운영 중인 모바일 Port-MIS의 활용 현황을 분석하고, 문제점과 활성화 요인을 파악하여 이를 기반으로 모바일 Port-MIS의 활성화 방안을 제시한다. 본 연구는 향후 모바일 기술 도입을 준비하는 정부기관 및 기타 기관에게 가이드라인을 제시할 수 있을 것이다.

• 해양환경안전학회지
• /
• 제28권2호
• /
• pp.385-393
• /
• 2022

수소는 지구 온난화의 주범인 온실가스(GHG) 배출을 감소시키고 선박용 친환경 연료로서 대두되고 있다. 수소는 가연 하한계(Lower Flammability Limit, LFL)가 4 ~ 75 %이고 폭발 위험성이 큰 물질이다. 그래서 선박용으로 사용되려면 누출에 대비한 안전성이 충분히 확보되어야 한다. 본 연구에서는 수소탱크 저장실에서 수소 누출이 발생한 경우, 급·배기구의 면적 변화가 환기 성능에 미치는 영향을 분석하였다. 급·배기구의 면적은 1A = 740 mm × 740 mm이며 저장실 표면에 크기 및 위치 변경이 쉽도록 설정하였다. CFD 상용 소프트웨어인 ANSYS CFX ver 18.1을 이용하여 급·배기구의 면적을 1A, 2A, 3A, 5A로 변경하였고, 면적 변화에 따른 저장실 내의 수소 몰분율을 분석하였다. 그 결과 급기구 면적이 배기구 면적 증가에 비해 누출 수소의 농도를 더 감소시켰으며 단일 급기구보다 최소 2A 이상에서 환기 성능이 향상되었다. 급기구의 면적이 증가할수록 수소 층화가 저장실 상부부터 균일하게 형성되었지만 LFL 범위는 벗어나 있었다. 그러나 배기구는 면적을 단순히 증가하는 것만으로는 환기 성능에 미치는 영향은 미비하였다.

• 해양환경안전학회지
• /
• 제12권2호
• /
• pp.139-144
• /
• 2006

컨테이너 선박 및 고속선 등과 같은 고속선박의 등장으로 해상에서의 선박 속력은 이전보다 더욱 높아지고 있다. 그러나 우리나라의 특정해역으로 지정되어 있는 현행 교통 밀집해역에서의 속력규제는 수십년전의 규정으로 현재의 교통상황에 잘 부합되지 않는 제도라고 사료된다. 특히 그 해역을 항행하고 있는 선박운항자의 주장으로 인천항의 속력규제 폐지, 광양항의 속력규제 완화 등 속력규제에 관한 논의가 계속되고 있지만 이러한 협수로에서의 속력규제에 대하여 수치화되거나 정량화된 연구는 드물다. 본 연구에서는 직선항로에서의 통항선박의 흐름을 재현한 후, 선박운항자의 선박운항 부담감을 정량화한 환경스트레스 모델(ES Model)을 이용하여 속력규제에 대하여 분석하여 최대속력규제의 효과 여부를 알아보고자 한다.