• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.17-22
• /
• 2001

This paper is the first of companion papers, which investigate port-masking effects on lean misfire limit. Port-masking was applied to commercial SOHC 3-valve and DOHC 4-valve engine by inserting masking plates between manifold and port. To induce various conditions of stratification, six types of masking plates were applied. The masking plates were placed in the upstream of injector to prevent wall wetting and two ports were not separated to permit both fuel and air entering through masked port. The results were compared with those by conventional port throttling. The results show that lean misfire limit mainly depends on masking direction, that is, high lean misfire limit is achieved when the port near the spark plug is masked. The mechanism of stratification by masking is different from axial stratification by port throttling. In this case, the rich mixture entering through masked port plays a very important role in the stratification process.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.169-170
• /
• 2010

Ulsan Port is in the situation which the harbour limit and anchorages are less narrow than other trading ports and the occurrence probability of marine accidents is high due to heavy marine traffic Especially, the shortage of anchorages will become worse in case that the number of inbound and outbound vessels increases according to the development of Ulsan New Port. We will find and suggest the plan to enlarge the harbour limit essentially needed to expand anchorages in this research The reasonable type of harbour limit which is based on the survey by a group of experts, was determined after the decision of the range of harbour limit to accommodate the relevant anchorages.

• Journal of Environmental Science International
• /
• v.30 no.11
• /
• pp.967-977
• /
• 2021

From January 1, 2020, the International Maritime Organization has implemented a global regulation, known as IMO 2020, to reduce the sulfur content in fuel oil of ships from 3.5% to 0.5%. In this study, we used data from air monitoring stations to evaluate the change in air quality at New Port and North Port in Korea areas after the regulation was implemented. The concentration of SO₂ and NO₂ was higher in the port areas than in the surrounding areas due to exhaust gas from ships and vehicles. However, the SO₂ concentration decreased by more than 50% in the port area, demonstrating the efficiency and positive effect of the IMO 2020 sulfur limit.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.196-196
• /
• 2017

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.58
• /
• pp.127-148
• /
• 2013

The Rotterdam Rules provide that port terminal operator may avoid or limit their liability for cargo loss, damage or delay in delivery or breach of any other obligation under the Rules by invoking the provisions that may provide a defence for, or limit the liability of, the carrier. Consequently the port terminal operator who are involved in the provision of maritime services may avoid or limit their liability for cargo loss, damage or delay in delivery or breach of any other obligation under the Rules. The port terminal operator to be applied for the Himalaya clause under the Rules must show that it has the requisite link with a Contracting State. In addition, the port terminal operator performs service to the period of time between the arrival of the goods at the port of loading and their departure from the port of discharge. The port terminal operator's liability for breaches of its obligation is limited to 875 SDR per package or other shipping units, or 3 SDR per kilogram of the gross weight of the goods. In addition, compensation for delay shall be limited to an amount equivalent to two and one-half times the fright payable on the goods delayed.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.487-492
• /
• 2010

Ulsan Port is the biggest base port for liquid cargoes in Korea and is pushing in earnest for the development of the 'Ulsan New Port' and 'Northeast Asia Oil-Hub' to prepare for continuous shipment growth. However, Ulsan is in the situation which the harbour limit and anchorages are narrower than other trading ports and the occurrence probability of marine accidents is very high due to heavy marine traffic. We will find and suggest the plan to enlarge the harbour limit essentially needed to expand anchorages considering the geomorphological features of Ulsan and the volume of marine traffic in this research. For the enlargement of harbour limit needed to expand anchorages, the anchorage area needed for Ulsan New Port was calculated after the quantitative analysis of enlargement range through the mutual comparison of the area of harbour limit and anchorages with berths and the volume of marine traffic. The reasonable type of harbour limit, which is based on the survey by a group of experts, was also determined after the decision of the range of harbour limit to accommodate the relevant anchorages.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.173-189
• /
• 1997

Whether over taking or parallel sailing of two or more vessels is allowable on marine traffic route or not, the traffic congestion due to traffic volume has to be evaluated separately. In Gaduk-sudo, overtaking or parallel sailing is so allowable that the Bumper Model is introduced to evaluated the traffic congestion. But the channels within the habour limit such as the route of Ulsan New Port are so prohibited overtaking or parallel sailing that the traffic congestion has to be evaluated by using theoretical traffic capacity or by traffic simulation. In this paper, the congestion of Southern New Port and Mipo Port was evaluated the congestion by using theoretical traffic capacity and the other area of Ulsan Port by traffic simulation. The incresed traffic volumes on Ulsan Channels according to Ulsan New Port Development in 2011 were evaluated to have no effect with the traffic congestion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.5
• /
• pp.97-103
• /
• 1997

Effects of fuel injection timing on the lean misfire limit of a sequential MPI SI engine has been investigated. To investigate the interaction of injection timing and intake flow characteristics, so called axial stratification phenomena, 4 kinds of different intake swirl port of the same combustion chamber geometry have been teated in a single cylinder engine test bench. And 2 kinds of fuel, gasoline and compressed natural gas(CNG), were used to see the effect of liquid fuel vaporization. Result shows that combination of port swirl and injection timing governs the lean misfire limit and lean misfire limit envelopes remain almost the same for a given ratio regardless of engine speed. It is also found that two phase flow has some effects on lean misfire limit.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.156-165
• /
• 2014

This paper is the first investigation on the effect of flow control methods on the part load performance in a spark ignition engine. For comparison of the methods, two control devices, port throttling and masking, were applied to a conventional engine without any design change of the intake port. Steady flow evaluation shows that steady flow rates per unit opening area and swirl ratio are very low compared with the port throttling and saturated from mid-stage valve lift, however, swirl increases slightly as the lift is higher in case of 1/4 masking control. In the part load performance, the effect of simple port throttling on lean misfire limit expansion is limited and insufficient; on the other hand a masking improves the limit considerably without any port modification for increasing swirl. Also the results show that the intake flow control improves the combustion with following two mechanisms: stratification induced by the combination of the flow pattern and the fuel injection timing attribute to ignition ability and the intensified flow ensure fast burn. In addition fuel consumption reduces under the flow controls and the reduction rate is different according to the operation conditions and control methods. At the Stoichiometric and/or low speed and low load the throttling method is more advantageous; however vice versa at lean and high load condition. Finally, the throttling is more efficient for HC reduction than masking, on the other side the NOx emissions increase under the masking and decrease under the port throttling compared with conventional port scheme.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1993.10b
• /
• pp.45-51
• /
• 1993