• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.423-428
• /
• 2005

Due to the fast growing rate of the global container trade, every major port is under the pressure of meeting the projected capacity demand. As a result, alternative solutions have been sought for improving capacity and meeting the growing demand for container storage area and terminal capacity. Moreover, material handling process re-engineering is now a critical issue for logistics and supply chain managers of airline, shipping lines, terminal and warehousing enterprises around the world. Therefore, the purpose of this paper is to develop the 3D simulator for executing performance valuation of port transportation systems. The developed 3D simulator system is to measure the effectiveness of the proposed total system and compare it with existing practices. The performance analysis variables are also defined for these comparisons.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.781-786
• /
• 2010

In this study, a new concept of ocean transport system, called the mobile harbor serving for a short distance transport of containers with cargo handling cranes between mother containerships and coastal ports, is introduced. Instead of direct berthing a very large containership at the coastal port, Mobile Harbor is moving to the offshore mooring basin with enough water depth condition. Therefore, investigation of the coastal environment, technical condition and limitation of the domestic trade ports for the application of Mobile Harbor, is essential process. To figure out the accessibility of mobile harbor, the environmental conditions, the cargo handling capacity and marine traffic volume and flow pattern has been analyzed with the tools for marine traffic simulation and virtual navigation aids system. The most proper Mobile Harbor mooring areas among trade ports of the south and east coast are selected by analyzing the obtained information and evaluating its application: (1) Under natural environmental conditions such as air and sea weather, three candidate areas are selected such as Masan port, Ulsan port, and Busan(New port) port. (2) Under marine traffic and appropriateness of water facilities, three candidate areas are selected as Mokpo port, Busan(New port) port, and Donghae & Mookho port (3) For a region-based analysis considering handling capacity and the local managed trade ports in vicinity, three candidate areas are selected as Busan region, Yosu & KwangYang region, and Mokpo region. Through this study, the basic guideline for selection of optimum trade port and offshore mooring basin for mothership and Mobile Harbor is recommended. In order to apply the Mobile Harbor to the real water, navigaton aids as the virtual route identification with AIS must be introduced for maritime safety in the vicinity of Mobile Harbor area which berthing and cargo handling is being conducted.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.11a
• /
• pp.95-99
• /
• 2000

The domestic ports become less competitive for the out of dated equipments and inefficient information system. Specially, Inchon Port, which is the second largest port of Korea, has the point at issue such as the excessive logistics cost because of the limit of handling capacity and the chronic demurrage. In this paper to develope the simulation programs the basic input parameters such as arrival intervals, cargo tons, service rates are analyzed and the probability density functions for there variable are estimated. Also to perform the conception of continuous berth utilization, the berth and cargo classification is reconstructed. And the more actual simulation is realized by using more detailed depth representation of water The simulation model is executed based on the knowledge base and database, and is constructed using Visual Basic and Access database. Simulation results reveal that this study suitably reflect the real berth operation and waiting time of ships is shortened.

• Journal of Korea Port Economic Association
• /
• v.17 no.1
• /
• pp.27-51
• /
• 2001

The purpose of this paper is to investigate the productive efficiency of world container ports by using the DEA (Data Envelopment Analysis) method and raw data from previous research in measuring the international competitiveness of world container ports. Ports have to cope with rapid changes in shipping environments. In order for a port to compete in the global market, it must provide port services promptly and accurately. Basically, there are two approaches to measuring the international competitiveness of a container port. First, there is the traditional productivity analysis method, which analyzes productivity based on the container port's facilities (efficiency, selectivity, land availability), and by its general capacity (handling ability, storage capacity, terminal productivity). Second there is multi-attribute utility analysis, which considers several elements including the reasons for selecting particular container ports and factors determining international competitiveness. This paper follows the first method (traditional productivity analysis) and extends the limitation of previous studies by using the DEA method newly, and suggesting: the relative productive efficiency of container ports. The main results of this paper are as follows: First, the results of the DEA analysis in terms of world container ports matches that of a previous study (Jun et al., 1993) at a level of 35%. The low ratio is due to the constrained set of input-output elements, the result of only twenty container ports being analyzed in this paper. Second, the result of the DEA analysis in terms of North-East Asia's container ports matches with that of a previous study (Ha, 1996) at a level of 100 percent. Therefore we can conclude that the DEA analysis is the best measurement method for international competitiveness. Policy implications for this study are as follows: First, when port authorities want to measure the international competition power of container ports and enhance their productive efficiency, they should consider the traditional method and newly introduce the DEA method. Second, according to the analysis results of the DEA method, pen authorities should recommend benchmarking ports as reference ports in order to enhance the productive efficiency of container ports that show an efficiency score of below 1.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.107-115
• /
• 1998

For the purpose of building the simulation model on cargo handling capacity of container terminal, we composed a model of container logistics system which has a 4 subsystems ; cargo handling, transportation, storage system and Gate complex system. Several date used in simulation gained through spot research and basic statistic analysis using raw data from January to Jane in 1998. The results of this study are as follows ; First, average available ratio of each subsystem was G/C 50%, Y/T 57.5%, storage system 56%, Gate complex 50%, and there was no subsystem occurring specific bottleneck. Second, comparing the results of simulation to the results of basic statistics, we can verify suitability of this simulation model. Third, Comparing the results of this study to the results of existed study, we were able to confirm a change of BCTOC container logistics system under IMF situation.

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.251-260
• /
• 1998

For the purpose of building the simulation model on cargo handling capacity in container terminal we composed a model of container logistics system which has a 4 subsystem; cargo handling transportation storage and gate complex system. Several data are used in simulation which were gained through a field study and a basic statistic analysis of raw data on BCTOC from January to Jane in 1998. The results of this study are as follows; First average available ratios of each subsystems were 50% for G/C, 57.5% for Y/T, 56% for storage system and 50% for gate complex. And there were no subsystems occurring specific bottleneck. Second comparing the results of simulation to the results of basic statistics analysis we can verifying the suitability of this simulation model. Third comparing the results of this study to the results of existed similar study in 1996, we were able to confirm the changes of container logistics system in BCTOC.

• Journal of Korea Port Economic Association
• /
• v.26 no.2
• /
• pp.82-98
• /
• 2010

The purpose of this paper is to suggest the efficiency measurement way of Korean seaport by using Average Index Transformation model of fuzzy DEA(Data Envelopment Analysis). Two inputs[cargo handling capacity, and berthing capacity], and outputs[cargo handling amount, and the number of ship calls] are used in 1995 and 2004 for 26 Korean seaports. Empirical main results are as follows: First, Tongyung, Gohyun, Okpo, and Sogcho Ports are efficient, and Yeasu Port shows the high efficiency level over 95% under input oriented CCR model. Gohyun and Sogcho Ports showed the most efficient score under average index transformation model. Okpo and Yeasu Ports increased their efficiency scores as the lamda(λ) values are up. The empirical results of fuzzy DEA average index transformation model for Wando, Yeasu, and Seoguipo ports showed that if the lamda values are higher, the efficiency scores are also higher. The main policy implication based on the findings of this study is that the management manager of Ministry of Land, Transport and Maritime Affairs in Korea should introduce the fuzzy DEA average index transformation model for deciding the size of inputs including the port investment amount and evaluating the port efficiency.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.27-29
• /
• 2017

Container terminals in Northern Vietnam have recorded an impressive development in recent years. This development, however, also raises a fierce competition among local container terminals to attract customers. Beside the handling charges, the vessels' waiting cost is also an important factor that drive the opinion of users in choosing appropriate terminal. This research plans to estimate the waiting cost in different container terminals in Northern Vietnam by building regression equation that describe the relationship between the rate of throughput/capacity and waiting cost/TEU. Queuing theory with the application of Poisson distibution is used to estimate the waiting time of arrival vessels and uncertainty theory is applied to estimate the vessel's daily expenses. Previous studies suggested two different formation of the equation and according to the research results, cubic equation is more suitable in the given case. The research results are also useful for further research which require calculation of waiting cost per TEU in each container terminal in Northern Vietnam.

• IE interfaces
• /
• v.20 no.1
• /
• pp.49-57
• /
• 2007

The design of the container stacking yard influences significantly the productivity of handling operations in port container terminals. This study proposes methods for determining specifications of the yard considering the travel distance of vehicles and the storage capacity of yards. For a given length and width of a yard, it is discussed how to determine the layout and the dimension of yard blocks. The alternatives of the yard layout are evaluated by using a simulation study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.67-73
• /
• 2016

This study analyzed the state of the vessels which were using the berth for dangerous goods more than its carrying capacity in the major dangerous cargo handling port of Ulsan in Korea, The result of the analysis showed that a ship which has 3 times more than the maximum berthing capacity was moored at berth. Accordingly, a simulation model for 50,000 DWT berth was built and carried out the mooring safety analysis with 50,000 DWT, 70,000 DWT and 100,000 DWT vessels by mooring assessment program. The evaluation was carried out according to the standard environment presented in OCIMF standards. 50,000 DWT vessel was evaluated to meet the acceptable criteria but, 70,000 DWT and 100,000 DWT vessels exceeded the acceptable limit as per external conditions. Consequently, safe mooring guidelines were suggested and also proposed the building of common 'Mooring safety guideline' for port with assessment of different cases.