• Journal of Digital Convergence
• /
• v.18 no.7
• /
• pp.37-46
• /
• 2020

The aim of this research is to analyze the concentration and deconcentration development of cruise ports in the Mediterranean area by utilizing the concentration ratio (CR), the Herfindahl-Hirschman Index (HHI), the Gini coefficient, and shift share analysis (SSA). The results of analysis indicated a concentration trend in the West Mediterranean. The cruise ports located in Venice, Piraeus, Naples and Livrno in Adriatic and East Med region lost cruise passengers, while the those in West Mediterranean gained the passengers and showed the trend of concentration. This paper providing the shifting passengers among cruise ports that indicates the competitiveness of cruise ports for industrial stake holders to better understand the cruise ports such as tourist boards, ship agents, and port agents.

• Journal of the East Asian Society of Dietary Life
• /
• v.2 no.1
• /
• pp.57-68
• /
• 1992

In order to obtain the information on the status of using university cafeteria and students' preferences, the survey was conducted through questionaires to 434 students(male:195, female : 239) of 8 universities - 2 universities employed dietitian and 6 universities which didn't employ dietitian -through all the area of Incheon from 19th November 1990 to 14th December, 1990. The results obtained were as follows. 1) For keeping temperature of meals until service to students Refrigerator or warming cabinet or putting meals on low flames were used, and the amount for one person was almost decided by rough estimation by experience. All the foods remained were discarded. Also most of the cooking manager's age were from 50 to 59 and almost cooking managers graduated middle school. The fuel to cook was gas or kerosene. Method to disinfect tableware was boiling. 2) In case of the frequency of using university cafeteria, male students used cafeteria more often than female students, and regardless of sex students made use of cafeteria for lunch more than for breakfast and supper. Students also used university cafeteria not employing dietitian more than cafeteria employing dietitian. Disregarding of male, female, cafeteria employing cafeteria not employing dietitian, all students pointed out that main reason for using cafeteria were 'low price' and 'no other place to eat' And minor reasons were ' good taste' and 'meal quality'. On the contrary, the case of not using cafeteria were 'waiting in line' to male students, 'poor taste' to female students, 'waiting in line' and 'no varieties' on the cafeteria which employed dietitian, 'poor taste' and 'poor hygienes' on the cafeteria which didn't employ dietitian. 3) Considering of the preferences of menu, both male and female students liked "Bibim Bab" And male students prefered meals which contained broth both but female students prefered a light meals. 4) the difference of preferences showed that female student's preferences were high at all foods, and the preferences of fruits were high for both students. In detail, male students liked port, liver and small intestine of cattle, oyster and beans boiled in soysauce. But female students likde milk, yogurt and cucumber.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.625-631
• /
• 2015

In this paper, an 8051 microcontroller with application-specific instructions and I/O ports for data transmission is designed. The designed microcontoller includes two UART ports and one SMBus port to control external devices and to transmit data with them. Application-specific instruction is developed and added to the instruction set to exploit these I/O ports. So the designed microcontroller can perform multi-device control and multi-byte transmission. Also, it can reduce the code size of the application program. Especially, the designed microcontroller does not stall and can execute other programs during data transmission, which significantly increases its efficiency. Synthesized in 0.18 um technology, the area overhead due to application-specific instructions was negligible. Operations of all instructions and I/O ports were verified to run correctly on a FPGA board.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.190-198
• /
• 2010

Asymmetric model for plasma uniformity by Ar and $CF_4$ was modeled by the antenna structure, the diameter of chamber, and the distance between source and substrate for the development of plasma equipment for 450 mm wafer. The aspect ratio of chamber was divided by diameter, distance from substrate, and pumping port area. And we found the condition with the optimized plasma uniformity by changing the antenna structure. The drift diffusion and quasi-neutrality for simplification were used, and the ion energy function was activated for the surface recombination and etching reaction. The uniformity of plasma density on substrate surface was improved by being far of the distance between substrate wall and chamber wall, and substrate and plasma source. And when the antenna of only 2 turns was used, the plasma uniformity can improve from 20~30% to 4.7%.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.333-340
• /
• 1994

Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16 MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with two complete blood count analyzers (Sysmex WE-8000 and Coulter STKS) for unidirectional data transmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.815-820
• /
• 2010

Fuel spray characteristics of the gasoline engine injector has been studied experimentally. Wall wetting fuel stream of the 4-hole and 12-hole injectors has been tested and measured with various installation angle and port masking shapes. Spray visualization has been performed to analyze spray formation, spray angle, and penetration length. Test result shows that wall wetting is greatly influenced by the induction air flow and injector installation angle. Wall wetting amount decreased as injector installation angle decreased. Masking decreased wall wetting amount by increasing local intake-air flow velocity due to the decreased section area. Spray visualization showed that the 12-hole injector has robust performance characteristics compared with the 4-hole injector.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.79-82
• /
• 2012

최근 지진해일 발생으로 인한 막대한 피해로 인해 지진해일 방재에 대한 중요성이 높아지고 있다. 지진해일 방재연구는 주로 실제 발생하였던 역사지진해일과 발생가능성이 높은 가상의 지진해일에 대해 해당지역의 재해정보도를 제작하여, 지진해일 발생 시 인명 및 재산피해를 최소화 하는 것에 초점이 맞추어져 있다. 따라서 이번 연구에서는 이러한 재해정보도의 효율성을 높이기 위해 지진해일 발생 시 인명피해가 발생할 가능성이 높은 위험지역을 선정하였다. 지진해일 위험지역을 선정하기 위해 가상의 지진해일을 수치모의 하였으며, 지진해일 발생 시 인명피해가 발생할 수 있는 지진해일 범람 높이를 선정하여 선정한 기준 높이 이상의 범람이 발생할 확률을 계산하였다. 지진해일 수치모의는 지진해일 전파모의와 범람모의 과정으로 이루어진다. 지진해일 전파모형은 선형 Boussinesq 방정식을 지배방정식으로 사용하며, 지진해일 범람모형은 비선형 천수방정식을 지배방정식으로 사용하였다. 수치모의를 통해 주문진항에서의 가상의 지진해일에 대한 범람영역 및 범람 높이를 얻었다. 수치모의를 통해 얻어진 범람 데이터를 이용해 기준 높이 이상의 범람 발생 확률을 계산하였다. 확률 계산을 위해선 해당 데이터의 확률분포를 결정하여야 하기 때문에, 적합도 검정을 수행하였다. 이번 연구에서는 여러 가지 적합도 검정 기법 중 하나인 확률도시 상관계수 검정(Probability Plot Correlation Coefficient Test)을 사용하였으며, 범람 데이터의 확률분포로 Normal, Log-normal, Exponential, Gumbel 분포를 가정하여 검정을 수행하였다. 각 지점별로 확률도시 상관계수 검정을 수행하여, 해당 지점의 확률분포를 결정하였고, 각 지점별로 해당하는 확률분포의 누적확률분포 함수를 이용해 기준 높이 이상의 범람이 발생할 확률을 계산하였다. 얻어진 확률을 지도상에 도시하여 기준 높이 이상의 범람 발생 확률이 높은 지점을 주문진항에서의 지진해일에 대한 인명피해 발생 가능성이 높은 위험지역으로 선정하였다.

• Journal of Drive and Control
• /
• v.14 no.4
• /
• pp.1-8
• /
• 2017

The Down-the-Hole hammer is one of the pneumatic drill equipment used for grinding, drilling, and mining. One the advantages of which is that a reduction work efficiency at deep site are relatively small compared to other drilling methods. Due to the large vibration in the underground area, it is difficult to measure the performance of the hammer, and hammer testing requires substantial production cost and operating expenses so research on the development of the hammer is insufficient. Therefore, this study has developed a dynamic simulation model that apprehends the operating principles of an 8-inch DTH hammer and calculates performance data such as performance impact force, piston speed, and BPM. By using the simulation model, design factors related to strike force and BPM were selected, and the influence of each design factors on performance was analyzed through ANOVA analysis. As a result, be the most important for BPM and the strike force are position of upper port that push the piston in the direction of the bit and in BPM, the size of the empty space between the bits and the piston is the second most important design factor.

• Journal of Korea Trade
• /
• v.25 no.6
• /
• pp.78-104
• /
• 2021

Purpose - Semiconductors are a significant export item for Korea that is expected to continue to contribute significantly to the Korean economy in the future. Thus, the semiconductor industry is a critical component in the 4th Industrial Revolution and is expected to continue growing as the non-face-to-face economy expands as a result of the COVID-19 pandemic. In this context, this paper aims to empirically investigate how semiconductors are imported and exported in Korea from a global supply chain perspective by analysing import and export data at the micro-level. Design/methodology - This study conducts a multifaceted analysis of the global supply chain for semiconductors and related equipment in Korea by examining semiconductor imports and exports by semiconductor type, year, target country, mode of transportation, airport/port, and domestic region, using import/export micro-data. The visualisation, flow analysis, and Bayesian Network methodologies were used to compensate for the limitations of each method. Findings - Korea is a major exporter of semiconductor memory and has the world's highest competitiveness but is relatively weak in the field of system semiconductors. The trade deficit in 'semiconductor equipment and parts' is clearly growing. As a result, continued investment in 'system semiconductors' and 'semiconductor equipment and parts' technology development is necessary to boost exports and ensure a stable supply chain. Originality/value - Few papers on semiconductor trade in Korea have been published from the perspective of the global supply chain or value chain. This study contributes to the literature in this area by focusing on import and export data for the global supply chain of the Korean semiconductor industry using a variety of approaches. It is our hope that the insights gained from this study will aid in the advancement of SCM research.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.289-295
• /
• 2019

Maritime back-up navigation system in port approach requires a horizontal accuracy of 10 meters in IALA (International Association of Lighthouse Authorities) recommendations. eLoran which is a best back-up navigation system that satisfies accuracy requirement has poor navigation performance depending signal environments. Especially, noise caused by multipath and electronic devices around eLoran antenna affects navigation performance. In this paper, Ship based Navigation Back-up system using UAV on Interference is designed to satisfy horizontal accuracy requirement. To improve the eLoran signal environment, UAVs are equipped with camera, IMU sensor and eLoran antenna and receivers. This proposed system is designed to receive eLoran signal through UAV-based receiver and control UAV's position and attitude within Landmark around area. The ship-based positioning using eLoran signal, vision and attitude information received from UAV satisfy resilient and robust navigation requirements.