• Journal of the Korean GEO-environmental Society
• /
• v.20 no.2
• /
• pp.41-48
• /
• 2019

Soil compaction is one of the most important activities in the area of civil works, including road construction, airport construction, port construction and backfilling construction of structures. Soil compaction, particularly in road construction, can be categorized into subgrade compaction and roadbed compaction, and is significant work that when done poorly can serve as a factor causing poor construction due to a lack of compaction. Currently, there are many different types of compaction tests, and the plate bearing test and the unit weight of soil test based on the sand cone method are commonly used to measure the degree of compaction, but many other methods are under development as it is difficult to secure economic efficiency. For the purpose of this research, a portable penetration meter called the Free-Fall Penetration Test (FFPT) was developed and manufactured. In this study, a homogeneous sample was obtained from the construction site and soil was classified through a sieve analysis test in order to perform grain size analysis and a specific gravity test for an indoor test. The principle of FFPT is that the penetration needle installed at the tip of an object put into free fall using gravity is used to measure the depth of penetration into the road surface after subgrade or roadbed compaction has been completed; the degree of compaction is obtained through the unit weight of soil test according to the sand cone method and the relationship between the degree of compaction and the depth of the penetration needle is verified. The maximum allowable grain size of soil is 2.36 mm. For $A_1$ compaction, a trend line was developed using the result of the test performed from a drop height of 10 cm, and coefficient of determination of the trend line was $R^2=0.8677$, while for $D_2$ compaction, coefficient of determination of the trend line was $R^2=0.9815$ when testing at a drop height of 20 cm. Free fall test was carried out with the drop height adjusted from 10 cm to 50 cm at increments of 10 cm. This study intends to compare and analyze the correlation between the degree of compaction obtained from the unit weight of soil test based on the sand cone method and the depth of penetration of the penetration needle obtained from the FFPT meter. As such, it is expected that a portable penetration tester will make it easy to test the degree of compaction at many construction sites, and will lead to a reduction in time, equipment, and manpower which are the disadvantages of the current degree of compaction test, ultimately contributing to accurate and simple measurements of the degree of compaction as well as greater economic feasibility.

• The Journal of Fisheries Business Administration
• /
• v.15 no.1
• /
• pp.131-153
• /
• 1984

Fishery resources are still abundant compared with other resources and the possibility of exploitation is probably great. The Korean fishery industry has grown remarkably since 1957, and Korea is ranked as one of the major fishery countries. Its of fishery products reached the 9th in the world and the value of exports was 5th in 1982. But recently a growth rate has slowed down, due to the enlargement of territorial seas by the declaration of the 200 mile, Exclusive Economic Zone, the tendency to develop fishery resources strate-gically in international bargaining, the change in function of the international organizations, the expansion of regulated waters, the illegal arrest of our fishing boats, the rapid rise in oil prices, and the fall in fish prices, the development of fishery resources as a symbol of nationalism, the fishing boats decreptitude, the rise of crew wages, regulations on fishing methods, fish species, fishing season, size of fish, and mesh size, fishing quotas and the demand of excessive fishing royalties. Besides the the obligation of coastal countries, employing crews of their host countries is also an example of the change in the international environment which causes the aggravation of foreign profit of fishing firms. To ameliorate the situation, our Korean fishery firms must prepare efficient plans and study systematically to internationalize themselves because such existing methods as conventional fishing entry and licence fishing entry are likely to be unable to cope with international environmental change. Thus, after the systematic analysis of the problem, some new combined alternatives might be proposed. These are some of the new schemes to support this plan showing the orientation of our national policy: 1. Most of the coastal states, to cope with rapid international environmental change and to survive in the new era of ocean order, have rationalized their higher governmental structure concerning the fishery industries. And the coastal countries which are the objectives of our expecting entry, demand excessive economic and technical aid, limit the number of fishing boats’entry and the use of our foreign fishing bases, and regulate the membership of the international fishery commissions. Especially, most of the coastal or island countries are recently independent states, which are poorer in national budget, depend largely on fishing royalties and licence entry fees as their main resources of national finance. 2. Alternatives to our entry to deep sea fishing, as internationalization strategies, are by direct foreign investment method. About 30 firms have already invested approximately US $ 8 million in 9 coastal countries. Areas of investment comprise the southern part of the Atlantic Ocean, the Moroccan sea and five other sea areas. Trawling, tuna purse seining and five other fields are covered by the investment. Joint-venture is the most prominent method of this direct investment. If we consider the number of entry firms, the host countries, the number of seas available and the size of investment, this method of cooperation is perhaps insufficient so far. Our fishery firms suffer from a weakness in international competitive ability, an insufficiency of information, of short funds, incompetency in the market, the unfriendliness of host coastal countries, the incapability of partners in joint-ventures and the political instability of the host countries. To enlarge our foreign fishing grounds, we are to actively adopt the direct investment entry method and to diversity our collaboraboration with partner countries. Consequently, besides proper fishing, we might utilize forward integration strategies, including the processing fied. a. The enterprise emigration method is likely to be successful in Argentina. It includes the development of Argentinian fishing grounds which are still not exploited in spite of abundant resources. Besides, Arentina could also be developed as a base for the exploitation of the krill resources and for further entries into collaboration with other Latin American countries. b. The co-business contract fishing method works in American territorial seas where American fishermen sell their fishery products to our factory ships at sea. This method contributes greatly to obtaining more fishing quotas and in innovation bottom fishing operation. Therefore we may apply this method to other countres to diffuse our foreign fishing entry. c. The new fishing ground development method was begun in 1957 by tuna long-line experimental fishing in the Indian Ocean. It has five fields, trawling, skipjack pole fishing and shrimp trawling, and so on. Recently, Korean fisheries were successful in the development of the Antarctic Ocean krill and tuna purse seining. 3. The acceleration of the internationalization of deep sea fishing; a. Intense information exchange activities and commission participation are likely to be continues as our contributions to the international fishery organizations. We should try to enter international fishery commissions in which we are not so far participating. And we have to reform adequately to meet the changes of the function of the international commissions. With our partner countries, we ought to conclude bilateral fishery agreements, thus enlarging our collaboration. b. Our government should offer economic and technical aids to host countries to facilitate our firms’fishery entry and activities. c. To accelerate technical innovation, our fishery firms must invest greater amount in technical innovation, at the same time be more discriminatory in importing exogeneous fishery technologies. As for fishing methods; expanded use of multi-purpose fishing boats and introduction of automation should be encuraged to prevent seasonal fluctuations in fishery outputs. d. The government should increases financial and tax aid to Korean firms in order to elevate already weak financial structure of Korean fishery firms. e. Finally, the government ought to revise foreign exchange regulations being applied to deep sea fishery firms. Furthermore, dutes levied on foreign purchaed equipments and supplies used by our deep sea fishing boats thould be reduced or exempted. when the fish caught by Korean partner of joint-venture firms is sold at the home port, pusan, import duty should be exempted.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.8-8
• /
• 1987

This paper describes on the distribution of the vibration and the noise produced on a skipjack pole and line training ship M/S Pusan 403 (243GT, 1,000ps) under the cruising or drifting condition. The vibration and the noise level were measured by use of protable vibration analyzer (B and K 3513) and sound level meter (B and K 2205), and so the vibration level was converted into dB unit. The check points were set through every decks and around important places of the ship. The results obtained can be summarized as follows: 1. The vibration and the noise level 1) On the main deck, both the vibration and the noise level were highest at the vertically above the main engine, whereas the vibration level was the lowest in the bow store and the noise level beneath the bridge. 2) Under cruising condition, the vibration level around the cylinder head of main engine, port side of the engine room, on the shaft tunnel was 80, 67, 65 dB and the noise level 104, 87, 86 dB, respectively. 3) The vibration level on the vertical line passing through the bridge was the highest at the orlop deck with 60 dB and the lowest on the bridge deck with 55 dB, whereas the noise level the highest at the compass deck with 75 dB and the lowest at the orlop deck with 53 dB. 4) The vibration and the noise level on the open decks were the highest with 65 dB and 84 dB on the boat deck, whereas the vibration level was the lowest at the lecture room with 51 dB and the noise level the lowest at the fore castle deck with 57 dB. 5) On the orlop decks, both the vibration and the noise level were the highest at the engine room with 65 dB and 85 dB, and the lowest at bow store with 54 dB and 52 dB, respectively. Comparing with the vibration level and the noise level, the vibration level was higher than the noise level in the bow part and it was contrary in the stern part of the ship. 2. Vibration analysis 1) The vibration displacement and the vibration velocity were the greatest at the cylinder head of main engine with 100μm and 11mm/sec, and were the smallest at the compass deck with 3μm and 0.07mm/sec. They were also attenuated rapidly around the frequency of 100Hz and over. 2) The vibration acceleration was the greatest at the cylinder head with the main frequency of 1KHz and the acceleration of 1.1mm/sec super(2), and the smallest at the compass deck with 30KHz and 0.05mm/sec super(2).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.54-60
• /
• 1987

This paper describes on the distribution of the vibration and the noise produced on a skipjack pole and line training ship M/S Pusan 403 (243GT, 1,000ps) under the cruising or drifting condition. The vibration and the noise level were measured by use of protable vibration analyzer (B and K 3513) and sound level meter (B and K 2205), and so the vibration level was converted into dB unit. The check points were set through every decks and around important places of the ship. The results obtained can be summarized as follows: 1. The vibration and the noise level 1) On the main deck, both the vibration and the noise level were highest at the vertically above the main engine, whereas the vibration level was the lowest in the bow store and the noise level beneath the bridge. 2) Under cruising condition, the vibration level around the cylinder head of main engine, port side of the engine room, on the shaft tunnel was 80, 67, 65 dB and the noise level 104, 87, 86 dB, respectively. 3) The vibration level on the vertical line passing through the bridge was the highest at the orlop deck with 60 dB and the lowest on the bridge deck with 55 dB, whereas the noise level the highest at the compass deck with 75 dB and the lowest at the orlop deck with 53 dB. 4) The vibration and the noise level on the open decks were the highest with 65 dB and 84 dB on the boat deck, whereas the vibration level was the lowest at the lecture room with 51 dB and the noise level the lowest at the fore castle deck with 57 dB. 5) On the orlop decks, both the vibration and the noise level were the highest at the engine room with 65 dB and 85 dB, and the lowest at bow store with 54 dB and 52 dB, respectively. Comparing with the vibration level and the noise level, the vibration level was higher than the noise level in the bow part and it was contrary in the stern part of the ship. 2. Vibration analysis 1) The vibration displacement and the vibration velocity were the greatest at the cylinder head of main engine with 100$\mu$m and 11mm/sec, and were the smallest at the compass deck with 3$\mu$m and 0.07mm/sec. They were also attenuated rapidly around the frequency of 100Hz and over. 2) The vibration acceleration was the greatest at the cylinder head with the main frequency of 1KHz and the acceleration of 1.1mm/sec super(2), and the smallest at the compass deck with 30KHz and 0.05mm/sec super(2).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.1958-1965
• /
• 2013

This study is conducted to investigate the contents of ${\beta}$-carotene and retinol in bap (e.g. gimbap, bokkeumbap, sushi, deopbap, bibimbap), guk (e.g. sundaeguk, seonjiguk), tang (e.g. galbitang, chueotang), and jjigae (e.g. dongtaejjigae, kimchi jjigae with port) by using saponification extraction and HPLC analysis. The samples were collected from six regions in Korea (Gangwon-do, Gyeonggi-do, Gyeongsang-do, Seoul, Jeonla-do, Chuncheong-do). In bap, the ${\beta}$-carotene contents of kimchi gimbap (234.459~719.180 ${\mu}g/100g$), bibimbap (200.091~489.867 ${\mu}g/100g$) and pork deopbap (228.876~778.591 ${\mu}g/100g$) were higher than that of sushi (0.000~41.234 ${\mu}g/100g$), and jajangbap (4.833~28.141 ${\mu}g/100g$). The retinol contents of bap was 0.000~60.418 ${\mu}g/100g$, among which, omelet rice (13.974~60.418 ${\mu}g/100g$) showed the highest amount of retinol. Among the analyzed guk (tang) and jjigae, higher contents of ${\beta}$-carotene were observed in chueoutang (346.261~843.947 ${\mu}g/100g$), kimchi jjigae with pork (178.558~352.604 ${\mu}g/100g$) and altang (169.443~175.287 ${\mu}g/100g$). The retinol of guk (tang) and jjigae were not detected to doganitang, gomtang, naejangtang, chueotang and soy sprout haejangguk.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.5_6
• /
• pp.257-266
• /
• 2007

In On-Chip bus, the arbitration scheme is one of the critical factors that decide the overall system performance. The arbitration scheme used in traditional shared bus is the master-side arbitration based on the request and grant signals between multiple masters and single arbiter. In the case of the master-side arbitration, only one master and one slave can transfer the data at a time. Therefore the throughput of total bus system and the utilization of resources are decreased in the master-side arbitration. However in the slave-side arbitration, there is an arbiter at each slave port and the master just starts a transaction and waits for the slave response to proceed to the next transfer. Thus, the unit of arbitration can be a transaction or a transfer. Besides the throughput of total bus system and the utilization of resources are increased since the multiple masters can simultaneously perform transfers with independent slaves. In this paper, we implement and analyze the arbitration schemes for the Multi-Layer AHB BusMatrix based on the slave-side arbitration. We implement the slave-side arbitration schemes based on fixed priority, round robin and dynamic priority and accomplish the performance simulation to compare and analyze the performance of each arbitration scheme according to the characteristics of the master and slave. With the performance simulation, we observed that when there are few masters on critical path in a bus system, the arbitration scheme based on dynamic priority shows the maximum performance and in other cases, the arbitration scheme based on round robin shows the highest performance. In addition, the arbitration scheme with transaction based multiplexing shows higher performance than the same arbitration scheme with single transfer based switching in an application with frequent accesses to the long latency devices or memories such as SDRAM. The improvements of the arbitration scheme with transaction based multiplexing are 26%, 42% and 51%, respectively when the latency times of SDRAM are 1, 2 and 3 clock cycles.

• Korean Journal of Environmental Biology
• /
• v.24 no.4
• /
• pp.392-407
• /
• 2006

This study was seasonally undertaken to investigate the benthic polychaetous community along the South-eastern coast of Geoje Is., in February 2004 to November. The macrobenthic fauna showed mean density of 953 md. $m^{-2}$ in February, 1,193 ind. $m^{-2}$ in May, 1,130 ind. $m^{-2}$ in September and 991 ind. $m^{-2}$ in November. Major faunal groups are polychaetes, crustaceans and mollusks, corresponding to 81.6%, 7.9%, 7.0% in total mean density during the sampling seasons, respectively. There was significant difference (two-way ANOVA, p<0.001) among stations in densities of polychaetes. But no significant relationship could be found between the densities of polychaetes and sampling seasons (two-way ANOVA, p>0.05). The density and the species number of polychaetes were high in the coastal area near the Jisepo port, independent of sampling seasons. Several indicator species for the organically enriched environments such as Lumbrineris longifolia, Tharyx sp., Heteromastus filiformis showed high densities during all study periods. Also Magelona japonica included in Ecolgical group I was the most abundant in the whole study period except for February. Cluster analysis on the basis of the species composition showed that the study area could be divided into 3 regions. The density of benthic polychaetes in the coastal area near Jisepo was higher than that in the other assemblages of the study area, due to some predominant opportunistic species, such as Lumbrineris longifolia, Tharyx sp. and Heteromastus filiformis. In addition, the two-way ANOVA showed significant differences among the distribution of AMBI (AZTI's Marine Biotic Index) values, both in sampling stations (p<0.001) and seasons (p<0.01). According to the classification proposed by Borja et at. (2000), the study area was slightly disturbed site.

• Management & Information Systems Review
• /
• v.33 no.5
• /
• pp.185-212
• /
• 2014

This study investigated the base of marine leisure facilities and studied the future vision for development of marine industry by conducting a systematic analysis on the category of marine leisure products for development of design and specialization of southeast area of Korea. If the age of $20,000 of per capita national income is called 'the age of my car', $20,000 of per capita national income is called 'the age of my boat'. According to the report of UK-based Marine South East, the scale of world's small boat and personal waterborne equipment reached 277 trillion won in 2010 and domestic market scale is expected to be 11 trillion won. Marine leisure facilities are the new growth engine industry that the government should promote as a nation's strategic and core industry, and the government is pushing ahead with promotion of marine industry actively by announcing Marine Leisure Equipment Industry Activation Plan(June 2009, Ministry of Knowledge Economy), Marine Leisure Activation Plan(July 2010, Ministry of Land, Infrastructure and Transport), The 1st General Plan for Marina Port(January 2010, Ministry of Land, Infrastructure and Transport) etc. The purpose of marine design lies in seeking the status of the country and qualitative value in human life through functional, artistic, industrial and cultural development of design elements for all marine activities made around the sea. Related to all activities made in the ocean and cost, marine design is a sphere of design that includes special conditions centering around water. Considering the condition that 3 sides of land are facing the sea, this study systematically analyzed present condition of equipment possessed by each area, type of facilities, operational status, current status of sectoral use of marine leisure facilities and future prospect of marine leisure products that become the basis of value to raise the statue as an advanced marine power in 2010s through development of the qualitative level of the people, establishment of the direction of national strategy, convergence of industry and culture and specialization of area focusing on the actual condition survey of marine leisure facilities. Especially, this study will be predicting the basis of strategy for strengthening marketability and competitiveness by suggesting role and process of design in developing a promising marine leisure product through an actual condition survey of marine leisure products of southeast area.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.379-399
• /
• 2020

The detection of illegal ship is one of the key factors in building a marine surveillance system. Effective marine surveillance requires the means for continuous monitoring over a wide area. In this study, the possibility of ship detection monitoring based on satellite SAR, HF radar, UAV and AIS integration was investigated. Considering the characteristics of time and spatial resolution for each platform, the ship monitoring scenario consisted of a regular surveillance system using HFR data and AIS data, and an event monitoring system using satellites and UAVs. The regular surveillance system still has limitations in detecting a small ship and accuracy due to the low spatial resolution of HF radar data. However, the event monitoring system using satellite SAR data effectively detects illegal ships using AIS data, and the ship speed and heading direction estimated from SAR images or ship tracking information using HF radar data can be used as the main information for the transition to UAV monitoring. For the validation of monitoring scenario, a comprehensive field experiment was conducted from June 25 to June 26, 2019, at the west side of Hongwon Port in Seocheon. KOMPSAT-5 SAR images, UAV data, HF radar data and AIS data were successfully collected and analyzed by applying each developed algorithm. The developed system will be the basis for the regular and event ship monitoring scenarios as well as the visualization of data and analysis results collected from multiple platforms.