• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.73-74
• /
• 2015

Synthesis gas such as hydrogen and carbon monoxide was produced from $CH_4/oxygen$ mixture using insulated pressurized porous media combustor. Experimentally, two cylindrical SiC foams with the different pore density were piled up in a quartz tube and fully premixed mixture was supplied in the axial direction. After stabilizing fuel-rich flame at the interface of the two foams at several pressure conditions, mole fractions of synthesis gases were measured by gas chromatography. Heat recirculation through the inner foam structure could extend the flow velocity of stable region over the laminar burning velocity. As the pressure increased, the rich flammability limit, $H_2/CO$ ratio, and module M increased.

• Environmental Engineering Research
• /
• 제16권4호
• /
• pp.231-236
• /
• 2011

Biological nitrogen removal, using a continuous flow packed-bed reactor (CPBR) in a consecutive nitrification and denitrification process, was evaluated. An apparent decline in the nitrification efficiency coincided with the steady increase in $NH_4{^+}$-N load. Sustained nitrification efficiency was found to be higher at longer empty bed contact times (EBCTs). The relationship between the rate of alkalinity consumption and $NH_4{^+}$-N utilization ratio followed zero-order reaction kinetics. The heterotrophic denitrification rate at a carbon-tonitrogen (C/N) ratio of >4 was found to be >74%. This rate was higher by a factor of 8.5 or 8.9 for $NO_3{^-}$-N/volatile solids (VS)/day or $NO_3{^-}-N/m^3$ ceramic media/day, respectively, relative to the rates measured at a C/N ratio of 1.1. Autotrophic denitrification efficiencies were 80-90%. It corresponds to an average denitrification rate of 0.96 kg $NO_3{^-}-N/m^3$ ceramic media/day and a relevant average denitrification rate of 0.28 g $NO_3{^-}$-N/g VS/day, were also obtained. Results presented here also constitute the usability of an innovative porous sulfur ceramic media. This enhanced the dissolution rate of elemental sulfur via a higher contact surface area.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.95-98
• /
• 2006

Filtration by fibrous filter is one of the Principle methods used for removing pollutant particles in the liquid. Because of the increasing need to protect both human health and valuable devices from exposure to fine particles, filtration has become more important. Filters have been developed with modified surface charge characteristics to capture and adsorb particles by electrokinetic interaction between the filter surface and particles contained in water. The main purposes of this study are to develop and evaluate the performance evaluation of the apparatus for making a positively charged porous filter media and to analyze the surface characteristics of the filter media for capturing negavitely charged contaminants mainly bacteria and virus from water. The experimental apparatus consists of a mixing tank, a vacuum pumping system, a injection nozzle, a roller press and a controller. The filter media is composed of glass fiber(50-750 nm), cellulose($10-20{\mu}m$) and colloidal charge modifier. The characteristics of filter media is analyzed by SEM(Scanning Electron Microscopy), AFM(Atomic Force Microscopy) and quantified by measuring the zeta potential values.

• 한국CDE학회논문집
• /
• 제17권1호
• /
• pp.54-61
• /
• 2012

In this paper, we performed numerical analysis to improve the heat exchange efficiency of wasted heat recovery ventilator which has a delivery and a exhaustion fan. One of the most important design factors that affect the efficiency of heat exchange is uniform counter-flow between inbound and outbound air flows. We had simulated several types of porous plates which were installed at air intake area. With plate having 45 degrees of installation angle and 15 mm diameter holes which are uniformly arranged, we can generate a uniform air flows at the area of porous media where inbound and outbound air flows are cross over. In addition, we installed a duct to reduce vortex flows at the outlet and to discharge exhaust airs rapidly. By using the proposed numerical assessment, we expect the improvement of the heat exchange efficiency of ventilator.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.253-255
• /
• 2012

This study has numerically investigated the combustion processes in the bilayer porous media. To account for the velocity transition and diffusion influenced by solid matrix, porosity effects are included in the governing equations. Heat transfer coefficient is calculated by Nusselt number to reflect the effect of gas velocity, pore diameter, and material properties. Numerical results indicate that the present approach is capable of the essential features of the premixed combustion in the porous burner, in terms of the precised flame structure, pollutant formation, and flame stabilization. It is also found that heat transferred from the downstream flame zone is conducted to the upstream flame region through the solid matrix and the preheated mixture. By increasing the inlet velocity, the solid temperature of upstream is cooling down.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.685-693
• /
• 1990

본 연구에서는 복사열전달 효과를 알아보기 위해 에너지 방정식을 수치적으로 풀었으며, 그 결과를 열전달계수 및 온도의 항으로 나타내었다. 수치 해석적 모델의 검증을 위해 여러사람들이 물질전달과정 해석을 위해 사용한 나프타린 승화법(naphth- alene sublimation technique)을 이용하여 실험을 수행하였다. 또한 실험에 사용된 다공질체(ceramic blocks)의 침투율도 측정하였다.

• Steel and Composite Structures
• /
• 제38권5호
• /
• pp.523-531
• /
• 2021

The generalized thermoelastic analysis problem of a two-dimension porous medium with and without energy dissipation are obtained in the context of Green-Naghdi's (GNIII) model. The exact solutions are presented to obtain the studying fields due to the pulse heat flux that decay exponentially in the surface of porous media. By using Laplace and Fourier transform with the eigenvalues scheme, the physical quantities are analytically presented. The surface is shocked by thermal (pulse heat flux problems) and applying the traction free on its outer surfaces (mechanical boundary) through transport (diffusion) process of temperature to observe the analytical complete expression of the main physical fields. The change in volume fraction field, the variations of the displacement components, temperature and the components of stress are graphically presented. Suitable discussion and conclusions are presented.

• 풍력에너지저널
• /
• 제4권1호
• /
• pp.68-74
• /
• 2013

Offshore wind farm is being increased since there are much trouble to develop onshore wind farm. But in the offshore, wind turbine wake does not dissipate less than onshore wind turbine because of low turbulence level. Thus this remained wake interacted to other wind turbine. This interaction reduces energy production in wind farm and have a bad influence on fatigue load of wind turbine. In this research, CFD model was constructed to analyze wake effect in offshore wind farm. A method that wind turbine rotor region was modelled in porous media was devised to reduce computation load and validated by comparison with Horns Rev measurement. Then wake interaction between two wind turbine was analyzed by devised porous model.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.945-951
• /
• 2012

광촉매반응기의 충전제로서 glass bead-광촉매담체를 control로 하고 다공성의 silica-based 광촉매담체를 사용하였을 때의 악취 및 VOC를 함유한 폐가스의 광촉매 처리효율에 대한 광촉매담체 다공성의 영향평가를 수행하였다. 다공성의 silica-based-광촉매담체의 광촉매 코팅량은 $1,716.3{\mu}g/cm^2$로서 nonporous glass bead(control)에 담지된 광촉매코팅량인 $670{\mu}g/cm^2$ 값의 약 250%이었다. Porous silica-based 담체가 충전된 광촉매반응기의 황화수소 및 톨루엔 제거효율은 각각 22% 및 82%로서, glass-bead 담체가 충전된 UV/광촉매반응기의 경우의 황화수소 및 톨루엔 제거효율인 각각 19% 및 53%와 비교하였을 때에 황화수소의 경우는 약 16% 증가하였고 톨루엔의 경우는 약 55% 증가하였다. 따라서 다공성의 silica-based 광촉매담체를 사용함으로써 황화수소와 톨루엔의 동시처리효율을 각각 제고하였고, 처리효율의 제고율은 황화수소보다 톨루엔의 경우가 3.4배 높았다.

• 한국수자원학회논문집
• /
• 제31권4호
• /
• pp.459-467
• /
• 1998

유사매질개념에 의하여 비균질 다공성 매질을 설명할 수 있는 기존의 방법은 미시 밀러 상사(Mis), 거시 밀러 상사(MaS)와 웨릭 상사(WS)로 나눌 수 있고, 그들간의 관계는 MiS ⊂ MaS⊂ WS(⊂: subset)임을 알 수 있었다. 본 연구에서 제안한 방법은 WS에서 축적변수 $\alpha$=w 로 가정하고 함수량을 포화도 대신 유효포화도로 축적한 것이다. 이 방법은 검사해석의 관점에서 일반성이 결여되지 않고, 축적변수 $\alpha$만으로 비균질 매질을 설명할 수 있다. 즉 =1($\alpha$의 평균값)인 매질은 비균질 매질에 상응하는 등가매질을 의미하고, $\alpha$의 표준편차는 다공성 매질의 비균질 정도를 설명한다. $\alpha$>1인 매질의 특수계수는 등가매질의 투수계수보다 크며 또한 유효함수량은 $\alpha$>1인 매질에서 크게 나타난다. 이와같은 $\alpha$의 성질을 이용하여 가상적인 여직 1차원 비균질 다공성 매질을 난수 발생기법으로 생성하였다.