• Geophysics and Geophysical Exploration
• /
• v.18 no.4
• /
• pp.223-231
• /
• 2015

Self-potential (SP) is sensitive to groundwater flow and there are many causes to generate SP. Among many mechanisms of SP, pore-fluid flow in porous media can generate potential without any external current source, which is referred to as electrokinetic potential or streaming potential. When calculating SP responses on the surface due to geothermal fluid within an engineered geothermal system (EGS) reservoir, SP anomaly is usually considered to be generated by fluid injection or production within the reservoir. However, SP anomaly can also result from geothermal water fluid within EGS reservoirs experiencing temperature changes between injection and production wells. For more precise simulation of SP responses, we developed an algorithm being able to take account of SP anomalies produced by not only water injection and production but also the fluid of geothermal water, based on three-dimensional finite-element-method employing tetrahedron elements; the developed algorithm can simulate electrical potential responses by both point source and volume source. After verifying the developed algorithm, we assumed a simple geothermal reservoir model and analyzed SP responses caused by geothermal water injection and production. We are going to further analyze SP responses for geothermal water in the presence of water production and injection, considering temperature distribution and geothermal water flow in the following research.

• Clean Technology
• /
• v.23 no.4
• /
• pp.345-356
• /
• 2017

The composting is a biological process that converts organic matter into useful resources such as fertilizers. It is a continuous transition of microbial communities to adapt changes in organic matter and environmental conditions (carbonation rate, temperature, humidity, oxygen supply, pH, etc.). Most of the composting plants are located in the proximity of the residential areas. It is a general scenario where government authorities receive complaints from the local residents due to release of odor from the composting, and has become a social problem in Korea. Identification of dominant microorganisms, understanding change in microbial communities and augmentation of specific microorganism for composting is vital to enhance the efficiency of composting, quality of the compost produced, and reduction of odor. In this paper, we suggest the optimum operation conditions and methods for compost depot to reduce odor generation. The selection of the appropriate microorganisms and their rapid increase in population are effective to promote composting. The optimal growth conditions of bacteria such as aeration (oxygen), temperature, and humidity were standardized to maximize composting through microbial degradation. The use of porous minerals and moisture control has significantly improved odor removal. Recent technologies to reduce odor from the composting environment and improved composting processes are also presented.

• Korean Journal of Materials Research
• /
• v.24 no.12
• /
• pp.671-676
• /
• 2014

It is known that bones get damaged by accidents and aging. Since the discovery of Bioglass, various kinds of ceramics have been also found to bond to living bone; some of these ceramics are already being clinically used as bone-repairing materials. In the present study, antibacterial calcium silicate gel ($Ag-30CaO{\cdot}70SiO_2$ gel) was prepared by sol-gel method in order to control the microstructure, which is related to the dissolution rate and induction period of apatite formation in body environment. In addition, biological $Ag-30CaO{\cdot}70SiO_2$ is tested. This was done to impart antimicrobial activity to the $30CaO{\cdot}70SiO_2$. Ag ion was added during sol-gel synthesis to replace the $H_2O$ added during the making of the $30CaO{\cdot}70SiO_2$ gel, which has silver solutions of various concentration. After the sol-gel process, 1N-$HNO_3$ solution was used to wash the gel when synthesizing the gel, in order to maintain the porous structure and remove PEG, water soluble polymers. Then, the apatite forming ability of the sol-gel derived CaO-$SiO_2$ gels was investigated using simulated body fluid (SBF), which had almost the same ion concentration as that of human blood plasma. The gels were analyzed by FT-IR spectroscopy, SEM observation, XRD, and fluorescent microscopy. The apatite was successfully created even after washing the gel; apatite is present in an amorphous state, and was found to affect the concentration of the Ag ion in cells in MC3T3 live & dead assay results. From these results, it is suggested that a good material that can be used to repair defects of nature bone is $Ag-30CaO{\cdot}70SiO_2$ gel.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.36-43
• /
• 2016

The leaching behaviors of copper from chalcopyrite were investigated by sulfuric acid. The leaching of copper was examined according to concentration of sulfuric acid, leaching temperature and addition of hydrogen peroxide and ethylene glycol. The concentrations sulfuric acid and hydrogen peroxide in the leaching solution were increased, the leaching efficiencies of Cu were increased. At $30 -60^{\circ}C$, the leaching efficiency of Cu was increased but it was decreased at $70 - 80^{\circ}C$. The results were due to the increasing of hydrogen peroxide decomposition in the solution above $70^{\circ}C$. In the case of ethylene glycol added at $80^{\circ}C$, the decomposition of hydrogen peroxide was decreased and the leaching efficiency was increased. As a result of SEM analysis of leaching residue after leaching, the residue was found to porous form in the case of the ethylene glycol added and then the leaching efficiency of Cu was increased by the increase of surface area under $60^{\circ}C$ with ethylene glycol.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.543-551
• /
• 2018

The uranium concentrations were determined in groundwater collected from 3,820 community groundwater system (CGS) located in remote rural areas where access to the nationwide water work is not easy. The frequency distribution of uranium concentrations shows a lognormal distribution which is common in most radionuclide surveys. The measured maximum uranium concentration was $1,757.0{\mu}g/L$ with an average of $6.46{\mu}g/L$ and a median of $0.76{\mu}g/L$. When grouping the uranium concentration results of CGS into 10 geological units, the median uranium concentration was high ($0.99-2.05{\mu}g/L$) in three granite areas, and low in sedimentary rocks areas and porous volcanic rocks areas ($0.04-0.50{\mu}g/L$). Of the 3,820 samples, 3.8% are above the guideline value of $30{\mu}g/L$ (WHO, 2011). On the other hand, the exceeding rates of JGRA and PGRA CGS are 8.5% and 7.5%, respectively. Therefore, attention should be paid for the development of new CGS along with the management of the existing CGS in JGRA and PGRA areas.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.171-182
• /
• 1995

Five eucryptite and ten spodumene compositional powders were syntehsized from three sillimanite group, two kaolin group, and five pyrophyllite group silicate minerals. Those powders were isotatically pressed and fired at 1200~135$0^{\circ}C$ for 2 hrs, and then the sintered bodies were characterized. Silicate minerals with molar ratio of Al2O3 to SiO2 correspond to those of eucryptite and spodumene are kaolin and pyrophyllite group silicate minerals, respectively. Sintering characteristics of eucryptite from kaolin group and spodumene from pyrophyllite group mineral were superior to those from other silicate minerals. Eucryptite sintered bodies with 95~97% relative densities and densified microstructures can be obtained using Hadong pink kaolin as starting materials by sintering over broad temperature zone(1250~135$0^{\circ}C$). The eucryptite sintered bodies which were fired at 130$0^{\circ}C$ for 2hrs, from Hadong pink kaolin had within 3.0wt% microstructural compositional variations compaired with stoichiometric compound, and had good negative thermal expansiion property with -3.55$\times$10-6/$^{\circ}C$ thermal expansion coefficient. Spodumene sintered bodies which were prepared from pyrophyllite group silicate minerals, had dense microstructures and high densities by densification through liquid phase sintering with enlarged temperature range. The specimens which were fired at 130$0^{\circ}C$ for 2 hrs from Gusipyrophillite, had dense microstructure with crystallines mainly, and low thermal expansion property with 0.62$\times$10-6/$^{\circ}C$ thermal expansion coefficient. The porous texture and residual glass phase in LAS system ceramics which were prepared from silicate minerals, tend to increase the thermal expansion properties of sintered bodies to positive direction.

• Journal of Periodontal and Implant Science
• /
• v.44 no.4
• /
• pp.194-200
• /
• 2014

Purpose: The purpose of this study was to assess and compare the clinical and radiographic outcomes of guided tissue regeneration therapy for human periodontal intrabony defects using two different collagen membranes: a porous nonchemical cross-linking collagen membrane (NC) and a bilayer collagen membrane (BC). Methods: Thirty subjects were randomly assigned and divided into the following 3 groups: a test group (NC+BM), in which a NC was used with xenograft bone mineral (BM), a positive control group (BC+BM), in which a BC was used with xenograft BM, and a negative control group (BM), in which only xenograft BM was used. The following clinical measurements were taken at baseline and 3 months after surgery: plaque index, gingival index, probing pocket depth, gingival recession, and clinical attachment level. Radiographic analysis was performed at baseline, 1 week and 3 months after surgery. Results: Membrane exposure was not observed in any cases. Significant probing depth reduction, attachment-level gain and bone fill were observed for both test and control groups compared to baseline at 3 months after surgery (P<0.05). However, there were no statistically significant differences in clinical improvement and radiographic bone fill between treatment protocols (P>0.05). Conclusions: Within the limitations of this study, the results suggest that both NC and BC were comparable in terms of clinical and radiographic outcomes for the treatment of periodontal intrabony defects in human subjects.

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.35-45
• /
• 2018

Imaging technologies are applied at various geological scales including pore scale, core scale and intermediate scale in order to characterize pore space of rocks as well as to map the fluid distribution in porous media. This technical report presents experimental results using core-flooding apparatus suited with imaging technology. Three different core samples, that are homogeneous, fractured and heterogeneous cores, were used to assess the two-phase fluid migration behavior as $CO_2$ displaces resident brine. We show that imaging technology can be effective in characterizing salt-precipitation, capillary pressure and spatio-temporal variation of trapping mechanisms.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.191-198
• /
• 2000

A serpentine mineral was treated in hydrochloric acid solution to obtain amorphous silica residue with high surface area. The highly porous silica with aluminum hydroxide and sodium hydroxide was hydrothermally reacted in an autoclave. A numerous experiments were performed in terms of reaction time, temperature, alkalinity, and calcinations temperature. As a result, a ZSM-5 zeolite of the highest crystallinity was produced under such conditions as $^170{\circ}C$ of the reaction temperature, 24 hours of the reaction time, and $11.7Na_2O{\cdot}Al_2O_3{\cdot}90SiO_2{\cdot}3510H_2O{\cdot}10.8(TPA)_2O$ the composition along with 3 hours of the calcinations at $600^{\circ}C$.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.112-118
• /
• 2008

In the present study, the dependence of ultrasonic phase velocity on porosity and frequency in cancellous bone was predicted using the Biot model and the modified Biot-Attenborough (MBA) model for propagation in fluid-saturated porous media. It was also compared with previously published measurements in human and bovine cancellous bones in vitro. It was shown that the phase velocity in cancellous bone decreased with increasing porosity and frequency The dependence of phase velocity on propagation angle in cancellous bone as predicted using the Schoenberg model together with the Biot model and tile MBA model which were modified to include the effect of angle. The theoretical models used in the present study advance our understanding of the interaction between ultrasound and cancellous bone and can be expected to be usefully employed for the diagnosis of osteoporosis.