• 상하수도학회지
• /
• 제30권2호
• /
• pp.167-177
• /
• 2016

This work investigated the decomposition of aqueous anatoxin-a originated from cyanobacteria using an underwater dielectric barrier discharge plasma system based on a porous ceramic tube and an alternating current (AC) high voltage. Plasmatic gas generated inside the porous ceramic tube was uniformly dispersed in the form of numerous bubbles into the aqueous solution through the micro-pores of the ceramic tube, which allowed an effective contact between the plasmatic gas and the aqueous anatoxin-a solution. Effect of applied voltage, treatment time and the coexistence of nutrients such as $NO_3{^-}$, $H_2PO_4{^-}$ and glucose on the decomposition of anatoxin-a was examined. Chemical analyses of the plasma-treated anatoxin-a solution using liquid chromatography-mass spectrometry (LC-MS) and ion chromatography (IC) were performed to elucidate the mineralization mechanisms. Increasing the voltage improved the anatoxin-a decomposition efficiency due to the increased discharge power, but the energy required to remove a given amount of anatoxin-a was similar, regardless of the voltage. At an applied voltage of 17.2 kV (oxygen flow rate: $1.0L\;min^{-1}$), anatoxin-a at an initial concentration of $1mg\;L^{-1}$ (volume: 0.5 L) was successfully treated within 3 min. The chemical analyses using LC-MS and IC suggested that the intermediates with molecular weights of 123~161 produced by the attack of plasma-induced reactive species on anatoxin-a molecule were further oxidized to stable compounds such as acetic acid, formic acid and oxalic acid.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.149.2-149
• /
• 2003

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.244-248
• /
• 2010

Porous calcium phosphates were successfully fabricated by using a cuttlefish bone. The cuttlefish bone, which is composed of $CaCO_3$, showed a special porous microstructure containing uniform-sized voids. In this study, the pre-forms infiltrated distilled phosphoric acid were sintered at $1200^{\circ}C$ in an air atmosphere. The porous microstructure of the pre-forms was kept their original pattern after sintering with a synthesis of calcium phosphate. The obtained porous calcium phosphate, sintered at $1200^{\circ}C$ for 3 h at 17% concentration of phosphoric acid, showed uniform open pores of 150 ${\mu}m$ in size and $\beta$-TCP phase in the XRD patterns. Above 16% concentration, CaO phase, derived from the decomposition of $CaCO_3$, decreased gradually in the sintered samples, and the measured Ca/P ratios of the samples prepared from 16% and 18% concentration were 1.67 and 1.43, which are close to stoichiometric HA (1.66) and $\beta$-TCP (1.50).

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.349-367
• /
• 2022

In this research, an approach combining a semi-analytical method and an analytical method is presented to investigate the static and dynamic post-buckling behavior of the sandwich functionally graded (FG) porous cylindrical shells exposed to external pressure. The sandwich cylindrical shell considered is composed of a viscoelastic core and two FG porous (FGP) face layers. The viscoelastic core is made of Kelvin-Voigt-type material. The material properties of the FG porous face layer are considered continuous through each face thickness according to a porosity coefficient and a volume fraction index. Two types of sandwich FG porous viscoelastic cylindrical shells named Type A and Type B are considered in the research. Type A shell has the porosity evenly distributed across the thickness direction, and Type B has the porosity unevenly distributes across the thickness direction. The FG face layers are considered in two cases: outside metal surface, inside ceramic surface (OMS-ICS), and inside metal surface, outside ceramic surface (IMS-OCS). According to Donnell shell theory, von-Karman equation, and Galerkin's method, a discretized nonlinear governing equation is derived for analyzing the behavior of the shells. The explicit expressions for static and dynamic critical buckling loading are thus developed. To study the dynamic buckling of the shells, the governing equation is examined via a numerical approach implementing the fourth-order Runge-Kutta method. With a procedure presented by Budiansky-Roth, the critical load for dynamic post-buckling is obtained. The effects of various parameters, such as material and geometrical parameters, on the post-buckling behaviors are investigated.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.157.1-157
• /
• 2003

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.203.2-203
• /
• 2000

• 한국대기환경학회지
• /
• 제14권6호
• /
• pp.599-606
• /
• 1998

Removal of toluene vapor from airstreams was studied in a biological reactor known as a biofilter. The biofilter was packed porous ceramic inoculated with thickened activated sludge (MLVSS 17,683 mg/L). The lab-scale biofilter was operated for 42 days under various experimental conditions including inlet toluene concentrations and flow rates of the contaminated air streams. Removal efficiency reached up 96.6% after 4 days from start up. Nutrient limitation was proposed as a reason for the decrease in biofilter performence. Biofilter performance decreased substantially, coincident with the buildup of back pressure due to accumulation of excess VSS within the medium bed. Practically, the bed needs to be backwashed when the overall pressure drop is greater than 460.6 Pa at SV (Space Velocity) 100 h-1. Periodic backwashing of the biofilter was necessary for removing excess biomass and attaining stable long -term high removal efficiency The removal efficiency of toluene in the biofilter decreased as the gas velocity and toluene concentration in the inlet gas increased. The maximum elimination capacity of ceramic biofilter could reach up to 444.85 g/m3. hr. When the loading of toluene exceed this critical value, substrate inhibition occurred.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.229-234
• /
• 2004

수계슬러리의 동결건조 공정을 이용하여 배향성 기공을 갖는 NiO-YSZ 지지체를 제조하였다. 슬러리의 동결과정에서 형성된 얼음 결정은 진공건조 과정을 거치면서 승화되어 그 자리에 기공을 형성하였으며. 열전달 방향과 속도를 조절함으로써 얼음결정의 성장을 제어할 수 있음을 알 수 있었다. 제조된 NiO-YSZ 지지체는 배향성을 가진 거대(macro) 기공과 함께 표면에는 미세기공이 존재하는 독특한 기공구조를 형성하였다. 이것은 동결과정에 있어서 성형체의 위치에 따라 얼음의 성장속도가 다르기 때문에 발생하는 현상으로 생각된다. 얻어진 다공체 표면에 YSZ 슬러리를 dip 코팅하여 막을 형성한 후 140$0^{\circ}C$에서 동시소성(co-firing)하여 다공성 NiO-YSZ 지지체의 표면에 치밀한 YSZ 막이 코팅된 bilayer 제조에 성공하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.4-4
• /
• 2011

Extensive research efforts are directed toward the development of highly sensitive gas sensors using novel nanostructured materials. Among the different strategies for producing sensor devices based on nanosized building blocks, polymeric fiber templating approach which is combined by chemical and physical synthesis routes was attracted much attention. This unique morphology increases the surface area and reduces the interfacial area between film and substrate. Consequently, the surface activity is markedly enhanced while deleterious interfacial effects between film and substrate are significantly reduced. Both effects are highly advantageous for gas sensing applications. In this presentation, facile synthesis of hollow and porous metal oxide nanostructures and their applications in chemical sensors will be discussed.

• 한국결정성장학회지
• /
• 제31권4호
• /
• pp.182-189
• /
• 2021

무기질 단열재 개발을 위해 포말법을 이용하여 다공성 세라믹스를 제조하였다. 실리카 흄과 SiO₂를 주 원료로 사용하였으며, 다공성 세라믹의 균일한 기공 형성을 위한 첨가제로 벤토나이트를 사용하였다. 다공성 세라믹은 1200℃에서 소결하였으며, 기공율, 밀도, 압축강도, 미세구조 그리고 열전도도 분석을 수행하였다. 다공성 세라믹은 SiO₂에 대한 실리카흄의 함량이 70~90 % 증가할수록 비중이 0.63에서 0.69로 증가하였으며, 압축강도는 9.41 Mpa에서 12.86 Mpa로 증가하였다. 그러나, 기공율은 비중과 반대로 72.07 %에서 70.82 %로 감소하는 경향을 나타내었다. 열전도도 측정 결과, 실리카 흄의 함량이 70 %인 F7S3 다공성 세라믹의 경우 25~800℃ 온도조건에서 0.75~0.72 W/m·K의 열전도도를 나타내었으며, 실리카 흄의 함량이 90 %인 F9S1 다공성 세라믹의 경우 0.66~0.86 W/m·K를 나타내어 실리카 흄 함량이 적을수록 낮은 열전도도를 나타내었다. 이는 기공율 결과와 일치한 것을 확인하였다. SEM(Scanning Electron Microscope)을 이용한 미세구조 분석 결과, 다공성 세라믹 내/외부에 전체적으로 수십~수백 ㎛ 범위 기공이 관찰되었으며 기공 분포가 비교적 균일한 것을 확인할 수 있었다.