• Advances in nano research
• /
• 제10권2호
• /
• pp.115-128
• /
• 2021

In this article, free vibration behavior of electro-magneto-thermo sandwich Timoshenko beam made of porous core and Graphene Platelet Reinforced Composite (GPLRC) in a thermal environment is investigated. The governing equations of motion are derived by using the modified strain gradient theory for micro structures and Hamilton's principle. The magneto electro are under linear function along the thickness that contains magnetic and electric constant potentials and a cosine function. The effects of material length scale parameters, temperature change, various distributions of porous, different distributions of graphene platelets and thickness ratio on the natural frequency of Timoshenko beam are analyzed. The results show that an increase in aspect ratio, the temperature change, and the thickness of GPL leads to reduce the natural frequency; while vice versa for porous coefficient, volume fractions and length of GPL. Moreover, the effect of different size-dependent theories such as CT, MCST and MSGT on the natural frequency is investigated. It reveals that MSGT and CT have most and lowest values of natural frequency, respectively, because MSGT leads to increase the stiffness of micro Timoshenko sandwich beam by considering three material length scale parameters. It is seen that by increasing porosity coefficient, the natural frequency increases because both stiffness and mass matrices decreases, but the effect of reduction of mass matrix is more than stiffness matrix. Considering the piezo magneto-electric layers lead to enhance the stiffness of a micro beam, thus the natural frequency increases. It can be seen that with increasing of the value of WGPL, the stiffness of microbeam increases. As a result, the value of natural frequency enhances. It is shown that in hc/h = 0.7, the natural frequency for WGPL = 0.05 is 8% and 14% less than its for WGPL = 0.06 and WGPL = 0.07, respectively. The results show that with an increment in the length and width of GPLs, the natural frequency increases because the stiffness of micro structures enhances and vice versa for thickness of GPLs. It can be seen that the natural frequency for aGPL = 25 ㎛ and hc/h = 0.6 is 0.3% and 1% more than the one for aGPL = 5 ㎛ and aGPL = 1 ㎛, respectively.

• Computers and Concrete
• /
• 제25권5호
• /
• pp.427-432
• /
• 2020

In this research, the buckling analysis of sandwich beam with composite reinforced by graphene platelets (GPLs) in two face sheets is investigated. Three type various porosity patterns including uniform, symmetric and asymmetric are considered through the thickness direction of the core. Also, the top and bottom face sheets layers are considered composite reinforced by GPLs/CNTs based on Halpin-Tsai micromechanics model and extended mixture rule, respectively. Based on various shear deformation theories such as Euler-Bernoulli, Timoshenko and Reddy beam theories, the governing equations of equilibrium using minimum total potential energy are obtained. It is seen that the critical buckling load decreases with an increase in the porous coefficient, because the stiffness of sandwich beam reduces. Also, it is shown that the critical buckling load for asymmetric distribution is lower than the other cases. It can see that the effect of graphene platelets on the critical buckling load is higher than carbon nanotubes. Moreover, it is seen that the difference between carbon nanotubes and graphene platelets for Reddy and Euler-Bernoulli beam theories is most and least, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1078-1080
• /
• 2002

The pressure variation of interstitial fluid is one of the most important factors in bone physiology. In order to understand the role of interstitial fluid and the biomechanical interactions between fluid and solid constituents within bone, poroelastic theory was applied. The purpose of this study is to describe the behavior of calf vertebral trabecular bone composed of the porous solid trabeculae and the viscous bone marrow by using a commercial finite element analysis program based on the poroelasticity. In this study, the model was numerically tested for 5 different strain rates, i. e., 0.001, 0.01, 0.1, 1.0, and 10 per second. The material properties of the calf vertebral trabecular bone were utilized from the previous experimental study. Two asymptotic poroelastic response, the drained and undrained deformation, were predicted. From the predicted results for the simulated five strain rate, it was found that the pore pressure generation has a linearly increasing behavior when the strain rate is the highest at 10 per second, other wise it showed a nonlinear the strain rate Increased. Based on the results of the present study, it was suggested that the calf vertebral trabecular bone could be modeled as a porous material and its strain rate dependent material behavior could be predicted.

• 한국식품과학회지
• /
• 제6권1호
• /
• pp.42-54
• /
• 1974

국내에서 널리 이용되고 있는 26종(種)의 식품을 물리적(物理的) 성상(性狀)에 따른 Oldfield 등의 방법으로 분류하고 General Foods사(社)의 Texturometer에 의하여 그들의 특성(特性)을 측정하였다. 그 결과 gel 상(狀) 식품(食品), 불균일(不均一) gel 상(狀) 식품(食品), 지방(脂肪) emulsion 상(狀) 식품(食品), 세포조직상식품(細胞組織狀食品), 섬유상식품(纖維狀食品), 공극고체상(空隙固體狀) 식품(食品)에 따라 측정최적조건, texturometer curve 및 특성치가 다름을 확인하였다. 각 식품(食品)의 texture 특성은 동일한 제품사이에서도 다양성을 보여주고 있었으며 특히 공극고체상(空隙固體狀) 식품(食品)에서 가장 심한 차이를 나타내었다.

• Advances in nano research
• /
• 제10권3호
• /
• pp.235-251
• /
• 2021

In the current study, the free vibrational behavior of a Porous Micro (PM) beam which is integrated with Functionally Graded Piezoelectric (FGP) layers with initial curvature is considered based on the two trigonometric shear deformation theories namely SSDBT and Tan-SDBT. The structure's mechanical properties are varied through its thicknesses following the given functions. The curved microbeam is exposed to electro-mechanical preload and also is rested on a Pasternak type of elastic foundation. Hamilton's principle is used to extract the motion equations and the MCST is used to capture the size effect. Navier's solution method is selected as an analytical method to solve the motion equations for a simply supported ends case and by validating the results for a simpler state with previously published works, effects of different important parameters on the behavior of the structure are considered. It is found that although increasing the porosity reduces the natural frequency, but enhancing the volume fraction of CNTs increasing it. Also, by increasing the central angle of the curved beam the vibrations of the structure increases. Designing and manufacturing more efficient smart structures such as sensors and actuators are of the aims of this study.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.229-234
• /
• 2004

수계슬러리의 동결건조 공정을 이용하여 배향성 기공을 갖는 NiO-YSZ 지지체를 제조하였다. 슬러리의 동결과정에서 형성된 얼음 결정은 진공건조 과정을 거치면서 승화되어 그 자리에 기공을 형성하였으며. 열전달 방향과 속도를 조절함으로써 얼음결정의 성장을 제어할 수 있음을 알 수 있었다. 제조된 NiO-YSZ 지지체는 배향성을 가진 거대(macro) 기공과 함께 표면에는 미세기공이 존재하는 독특한 기공구조를 형성하였다. 이것은 동결과정에 있어서 성형체의 위치에 따라 얼음의 성장속도가 다르기 때문에 발생하는 현상으로 생각된다. 얻어진 다공체 표면에 YSZ 슬러리를 dip 코팅하여 막을 형성한 후 140$0^{\circ}C$에서 동시소성(co-firing)하여 다공성 NiO-YSZ 지지체의 표면에 치밀한 YSZ 막이 코팅된 bilayer 제조에 성공하였다.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.849-862
• /
• 2017

With growing interests in using bacterial biopolymers in geotechnical practices, identifying mechanical properties of soft gel-like biopolymers is important in predicting their efficacy in soil modification and treatment. As one of the promising candidates, dextran was found to be produced by Leuconostoc mesenteroides. The model bacteria utilize sucrose as working material and synthesize both soluble and insoluble dextran which forms a complex and inhomogeneous polymer network. However, the traditional rheometer has a limitation to capture in situ properties of inherently porous and inhomogeneous biopolymers. Therefore, we used the particle tracking microrheology to characterize the material properties of the dextran polymer. TEM images revealed a range of pore size mostly less than $20{\mu}m$, showing large pores > $2{\mu}m$ and small pores within the solid matrix whose sizes are less than $1{\mu}m$. Microrheology data showed two distinct regimes in the bacterial dextran, purely viscous pore region of soluble dextran and viscoelastic region of the solid part of insoluble dextran matrix. Diffusive beads represented the soluble dextran dissolved in an aqueous phase, of which viscosity was three times higher than the growth medium viscosity. The local properties of the insoluble dextran were extracted from the results of the minimally moving beads embedded in the dextran matrix or trapped in small pores. At high frequency (${\omega}>0.2Hz$), the insoluble dextran showed the elastic behavior with the storage modulus of ~0.1 Pa. As frequency decreased, the insoluble dextran matrix exhibited the viscoelastic behavior with the decreasing storage modulus in the range of ${\sim}0.1-10^{-3}Pa$ and the increasing loss modulus in the range of ${\sim}10^{-4}-1\;Pa$. The obtained results provide a compilation of frequency-dependent rheological or viscoelastic properties of soft gel-like porous biopolymers at the particular conditions where soil bacteria produce bacterial biopolymers in subsurface.

• 대한지하수환경학회지
• /
• 제2권1호
• /
• pp.22-29
• /
• 1995

유동 세균 입자는 지체계수를 감소시키므로써 지하수에서 소수성 오염물의 이동을 촉진시킨다. 그 크기와 표면의 적당한 물리화학적 조건으로 인하여 세균은 효율적인 오염물의 운반자가 될 수 있다. 이러한 운반자가 있을 때, 그 계는 액상, 입상, 그리고 고상의 3 상으로 해석되어야한다. 오염물은 각 상에 모두, 혹은 그 중의 일부에 존재할 수 도 있다. 본 연구에서는 세균이 있는 경우, 생화학적으로 분해 가능한 유기성 오염물의 다공매질에서의 거동을 물질수지에 기초하여 수학적 모델로 묘사한다. 세균의 액상과 고상사이의 물질 전이 및 오염물의 액상과 입상사이의 물질 전이는 동역학적 관계식으로 나타냈다. 모델 결과를 일반화하기 위하여 무차원화를 수행했고, 그 해를 구하여 세균에 의한 오염물의 가속이송 효과를 알 수 있었다. 모델 결과는 문헌상의 실험결과와 비교되었다. 모델 결과로부터 오염물은 그 계의 Damkohler I 수가 10 이상일 경우 국지 평형 가정을 할 수 있었으며, 세균의 성장율과 주입 농도 등이 오염물의 청소에 아주 중요한 요소임을 알 수 있었다.

• 한국재료학회지
• /
• 제23권3호
• /
• pp.206-210
• /
• 2013

In the segmented-in-series solid-oxide fuel cells (SIS-SOFCs), fabrication techniques which use decalcomania paper have many advantages, i.e., an increased active area of the electrode; better interfacial adhesion property between the anode, electrolyte and cathode; and improved layer thickness uniformity. In this work, a cell-stack was fabricated on porous ceramic flattened tube supports using decalcomania paper, which consists of an anode, electrolyte, and a cathode. The anode layer was $40{\mu}m$ thick, and was porous. The electrolyte layers exhibited a uniform thickness of about $20{\mu}m$ with a dense structure. Interfacial adhesion was improved due to the dense structure. The cathode layers was $30{\mu}m$ thick with porous structure, good adhesion to the electrolyte. The ohmic resistance levels at 800, 750 and $700^{\circ}C$ were measured, showing values of 1.49, 1.58 and $1.65{\Omega}{\cdot}cm^2$, respectively. The polarization resistances at 800, 750 and $700^{\circ}C$ were measured to be 1.63, 2.61 and $4.17cm^2$, respectively. These lower resistance values originated from the excellent interfacial adhesion between the anode, electrolyte and cathode. In a two-cell-stack SOFC, open-circuit voltages(OCVs) of 1.915, 1.942 and 1.957 V and maximum power densities(MPD) of 289.9, 276.1 and $220.4mW/cm^2$ were measured at 800, 750 and $700^{\circ}C$, respectively. The proposed fabrication technique using decalcomania paper was shown to be feasible for the easy fabrication of segmented-in-series flattened tube SOFCs.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.576-583
• /
• 2018

탄화규소는 실리콘과 비교시 큰 에너지 밴드 갭을 갖고, 불순물 도핑에 의해 p형 및 n형 전도의 제어가 용이해서 고온용 전자부품 소재로 활용이 가능한 재료이다. 특히 ${\beta}$-SiC 분말로부터 제조한 다공질 n형 SiC 세라믹스의 경우, $800{\sim}1000^{\circ}C$에서 높은 열전 변환 효율을 나타내었다. SiC 열전 변환 반도체를 응용하기 위해서는 변환 성능지수도 중요하지만 $800^{\circ}C$ 이상에서 사용할 수 있는 고온용 금속전극 또한 필수적이다. 일반적으로 세라믹스는 대부분의 보편적인 용접용 금속과는 우수한 젖음을 갖지 못 하지만, 활성 첨가물을 고용시킨 합금의 경우, 계면 화학종들의 변화가 가능해서 젖음과 결합의 정도를 증진시킬 수 있다. 액체가 고체 표면을 적시면 액체-고체간 접합면의 에너지는 고체의 표면에너지 보다 작아지고 그 결과 액체가 고체 표면에서 넓게 퍼지면서 모세 틈새로 침투할 수 있는 구동력을 갖게 된다. 따라서 본 연구에서는 비교적 낮은 융점을 갖는 Ag를 이용해서 다공질 SiC 반도체 / Ag 및 Ag 합금 / SiC 및 알루미나 기판간의 접합에 대해 연구하였고, Ag-20Ti-20Cu 필러 메탈의 경우 SiC 반도체의 고온용 전극으로 적용 가능할 것으로 나타났다.