• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 추계 총회 및 학술발표회
• /
• pp.63-65
• /
• 1998

1. Introduction : Atmospheric discharge of VOC-contaminated streams in chemical plants and air streams from chemical processes poses a serious environmental problem and entails large financial losses. Such emissions may be reduced by i) adsorption process, ii) absorption process and iii) incineration process. These processes only forbids the air pollutions. Throughout the recent decade, another technique-membrane process has emerged. The separation and recovery of organic vapors by membrane process may have great economic potential. Most of the published research works on the separation of organic vapors from air were performed using silicon rubber membranes. However, it is very difficult to fabricate very thin membranes with less than 1 $u m thickness. Plasma polymerization could be a good technique to generate a thin polymer film. The objective of this work is to find out the optimum condition of plasma polymerization for producing VOC separation membrane. For the objective, composite membranes are prepared through plasma polymerization of hexamethyldisiloxane onto porous substrates under different conditions. The membrane is then subjected to the permeation of permanent gases and VOCs to find the correlations between the physical properties of the penetrant and permeability and selectivity.

• 한국세라믹학회지
• /
• 제50권4호
• /
• pp.301-307
• /
• 2013

SiC hollow fiber was fabricated by curing, dissolution and sintering of Al-PCS fiber, which was melt spun the polyaluminocarbosilane. Al-PCS fiber was thermally oxidized and dissolved in toluene to remove the unoxidized area, the core of the cured fiber. The wall thickness ($t_{wall}$) of Al-PCS fiber was monotonically increased with an increasing oxidation curing time. The Al-PCS hollow fiber was heat-treated at the temperature between 1200 and $2000^{\circ}C$ to make a SiC hollow fibers having porous structure on the fiber wall. The pore size of the fiber wall was increased with the sintering temperature due to the decomposition of the amorphous $SiC_xO_y$ matrix and the growth of ${\beta}$-SiC in the matrix. At $1400^{\circ}C$, a nano porous wall with a high specific surface area was obtained. However, nano pores grew with the grain growth after the thermal decomposition of the amorphous matrix. This type of SiC hollow fibers are expected to be used as a substrate for a gas separation membrane.

• 공업화학
• /
• 제8권3호
• /
• pp.374-381
• /
• 1997

유리를 원료로 주형법에 의해 세라믹막을 제조하고, sodiumate, $S_3$-Al, $S_3$등의 실리콘 화합물을 침적시켜 세라믹-실리콘 복합막을 제조하여 이에 따른 기체 투과특성에 대해 연구하였다. 제조된 세라믹막과 세라믹-sodiumate 복합막은 다공성 구조임을 알수 있었고, 세라믹-$S_3$-Al과 세라믹-$S_3$ 복합막은 실리콘 화합물의 공극도입에 의한 치밀한 공극구조가 확인되었다. 세라믹막과 세라믹-sodiumate막의 경우 온도가 증가함에 따라 투과속도가 감소하고 압력에 따라 선형적으로 투과속도가 증가하였으며, 세라믹-$S_3$-Al과 세라믹-$S_3$ 복합막은 온도가 증가함에 따라 투과속도가 증가하는 경향을 보였으며, 상대적으로 투과속도에 미치는 압력의 영향이 적었다. 투과속도는 세라믹막이 가장 빠르게 나타났고, 세라믹-sodiumate, 세라믹-$S_3$-Al, 세라믹-$S_3$ 복합막 순서였으며, 선택도는 이와 반대 경향을 보였다. 또한 침적을 통한 투과속도를 구하여 실제 복합막의 투과속도와 비교한 결과, $S_3$가 가장 큰 영향이 있음을 확인하였다. 투과 메카니즘의 변화에서 세라믹막과 세라믹-sodiumate 복합막은 온도에 따라 투과기체의 투과도가 감소하는 Knudsen영역의 투과특성을 보였으나, 세라믹닉-$S_3$-Al과 세라믹-$S_3$ 복합막은 이와 반대로 온도에 따라 투과도가 증가하는 activated 확산 메카니즘을 따르는 특성을 보였다.