• Corrosion Science and Technology
• /
• 제6권3호
• /
• pp.133-139
• /
• 2007

Nickel powder was coated with aluminum nitrate solution to increase the thermal stability of a porous nickel support and control the nickel content in the Pd-Cu-Ni ternary alloyed membrane. Raw nickel powder and alumina coated nickel powder were uniaxialy pressed by home made press with metal cylindrical mold. Though the used nickel powder prepared by pulsed wire evaporation (PWE) method has a good thermal stability, the porous nickel support was too much sintered and the pores of porous nickel support was plugged at high temperature (over $800^{\circ}C$) making it not suitable for the porous support of a palladium based composite membrane. In order to overcome this problem, the nickel powder was coated by alumina and alumina modified porous nickel support resists up to $1000^{\circ}C$ without pore destruction. Furthermore, the compositions of Pd-Cu-Ni ternary alloy membrane prepared by magnetron sputtering and Cu-reflow could be controlled by not only Cu-reflow temperature but also alumina coating amount. SEM analysis and mercury porosimeter analysis evidenced that the alumina coated on the surface of nickel powder interrupted nickel sintering.

• 청정기술
• /
• 제29권3호
• /
• pp.178-184
• /
• 2023

전이금속 칼코젠화물은 소듐 이차전지의 음극재로서 높은 이론 용량을 가지나 충·방전 과정에서 큰 부피 팽창으로 인해 짧은 수명 특성을 보이며, 낮은 전기전도도로 인해 출력 특성을 저하시킨다는 문제가 있다. 이를 해결하기 위해, 본 연구에서는 분무열분해와 후 열처리 공정을 통해 다공성의 CNT ball과 (Ni,Co)Se₂ 나노결정이 복합된 구조체를 합성하였으며, 이를 소듐 이차전지의 음극에 적용시켜 전기화학적 특성을 평가하였다. 합성된 소재는 분무열분해 동안 Polystyrene(PS) 나노비드의 분해로 인해 다공성 구조를 형성하여 충방전 과정에서 발생하는 부피팽창을 효과적으로 수용하였으며, CNT 소재와의 복합화를 통해 전기화학적 성능을 향상시킬 수 있었다. 이로 인해 다공성 구조의 (Ni,Co)Se₂-CNT 복합소재는 0.2 A g^-1의 전류밀도에서 698 mA h g^-1의 높은 초기 방전용량을 보였으며, 100 사이클 후 400 mA h g^-1의 방전용량을 유지함을 보였다.

• Journal of Ceramic Processing Research
• /
• 제21권3호
• /
• pp.296-301
• /
• 2020

Ni as a catalyst for steam methane reforming (SMR) was deposited on a porous Al₂O₃ support using a hydrothermal-infiltration method. The SMR performance of Ni/Al₂O₃ composites was strongly affected by the microstructural change of the support according to the firing temperature. While there was no significant change up to 800 ℃, significant grain growth and large interfacial necking occurred after firing at 1,200 ℃, resulting in a significant increase in both porosity and pore size. The Al₂O₃ support with a large pore size and broad pore size distribution could load a relatively larger amount of Ni catalyst during the hydrothermal-infiltration process and facilitate the diffusion of reaction gases. Therefore, the Ni/Al₂O₃ composite with the support fired at 1,200 ℃ exhibited the best SMR performance. Meanwhile, Ni catalysts were distributed evenly throughout the porous support in the Ni/Al₂O₃ composite prepared by the hydrothermal-infiltration method compared to that prepared by the conventional infiltration method. Therefore, the Ni/Al₂O₃ composite prepared by the hydrothermal-infiltration method exhibited much better SMR performance. Moreover, no significant performance degradation was observed at 600 ℃ for 100 h.

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.291-298
• /
• 1993

In order to substitute for porous nickel anode in Molten Carbonate Fuel Cell(MCFC), porous cermet elec-trode was fabricated with Ni and Ni-P coated ceramic powder. Ni and Ni-P were coated by electroless plat-ing method in the nickel solution containing of hydrazine and sodium hypophosphate as a reducing agent. The plating solution was stirred by air and mechanical agitator. Ultrasonic irradiation was applied to the plating bath to improved the effect of agitation and coating speed. Electorde was formed by pressing method and doc-tor blade method followed by sinterd at$ 800^{\circ}C$ for 6 hours in H2 environment. Anode performance test carried out by potentiodynamic polarization technique in the MCFC operating condition and 154-161mA/$\textrm{cm}^2$ as ob-tained as a anode current density at the+100mV overpotential.

• 한국결정성장학회지
• /
• 제20권6호
• /
• pp.289-294
• /
• 2010

SOFC용 Ni-YSZ(Yttria Stabilized Zirconia) composite powders를 glycine nitrate process를 이용하여 만들었다. $ZrO(NO_3)_2{\cdot}2H_2O$, $Y(NO_3)_3{\cdot}6H_2O$, $Ni(NO_3)_2{\cdot}6H_2O$와 glycine을 출발원료로 하였으며 Ni의 부피비를 변화시켜 각기 그들의 소결 및 환원 특성을 알아보았다. Ni과 YSZ 상들이 상호 연결된 균질하게 분포된 다공성 미세구조를 관찰 할 수 있었으며 Ni의 첨가량에 따라 가공률이 민감하게 변화함을 알 수 있었다. 35 vol% 이상의 Ni를 함유한 Ni-YSZ cermet가 SOFC용 전극재료로 사용되는데 필요한 30% 이상의 공극을 갖는 조성임을 알 수 있었다.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 연료전지심포지움 2002논문집
• /
• pp.93-98
• /
• 2002

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.44-45
• /
• 2001

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 추계 학술발표강연 및 논문개요집
• /
• pp.36-36
• /
• 2001

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 춘계학술강연 및 발표대회
• /
• pp.38-38
• /
• 2002

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.137-146
• /
• 1994

This experiments were focused on a modification of mechamical properties and structure in porous aluminum titanate ceramics by new additives which have been not researched yet. These were consisted of four kinds of additives i.e. Bi2O3, FeO, ZnO and NiO by addition amount of 1 wt% and 5 wt% respectively. The addition of Bi2O3 retarded a degree of syntehsis of aluminum titanate and accelerated in FeO, ZnO, NiO additives. Also, the most effective accelerator in synthesis of alunium titanate was FeO. A additives for the most effective of modification of microstructure, sharp distribtion of pore size and mechanical proterties was on ZnO addition and showed the lowest average pore size and narrowed pore size distribution. In order to improve of microstructure and pore size distribution in porous aluminum titanate ceramics was desired the addition amount of 1 wt% compare to 5 wt%.