• 한국전산유체공학회지
• /
• 제14권2호
• /
• pp.68-76
• /
• 2009

The sloshing tank causes the instability of the fluid flows and the fluctuation of the impact pressure by the liquid on the tank. These flow characteristics inside the sloshing tank can generate the uncomfortable sloshing noise. In the present study, a numerical analysis for the reduction of a fuel tank sloshing noise was performed. To simulate the flow characteristics in a sloshing tank with partially filled liquid, a VOF method was used for interfacial flows by applying a momentum source term for the sloshing motion in a non-inertial reference frame. This numerical method was verified by comparing its results with the available experimental data. For the reduction of the sloshing noise, the horizontal and vertical baffles and porous media inside a sloshing tank were considered and numerically analyzed in the present study. For various installations of these baffles and porous media, the characteristics of the liquid behavior in the sloshing tank were obtained along with the impact pressure on the wall and the height of the free surface along the wall. These basic results can be used for the design of the actual vehicular fuel tank with the reduced sloshing noise.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.183-189
• /
• 2004

The flow and the heat transfer about the cross-flow fin-tube heat exchanger in an out-door unit of a heat pump system has been numerically Investigated. Using the general purpose analysis code, FLUENT, the Navier-Stokes equations and the energy equation are solved for the three dimensional computation domain that encompasses multiple rows of the fin-tube. The temperature on the fin and tube surface is assumed constant but compensated later through the fin efficiency when predicting the heat-transfer rate. The contact resistance is also taken into consideration. The flow and temperature fields for a wide range of inlet velocity and fin-tube arrangements are examined and the results are presented in the paper. The details of the flow are very well captured and the heat transfer rate for a range of inlet velocity is in excellent agreement with the measured data. The flow solution provides the effective permeability and the inertial resistance factor of the heat exchanger if the exchanger were to be approximated by the porous medium. This information is essential in carrying out the global flow field calculation which, in turn, provides the inlet velocity lot the microscopic temperature-field calculation of the heat exchanger unit.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제5권2호
• /
• pp.97-104
• /
• 2017

본 논문에서는 휠로더 냉각성능 평가를 위한 열유동해석의 효율성 향상과 비용 저감을 위해서 흡배기구 다공판형상을 Porous media 기법을 이용하여 단순화하고 해석 정도를 확인하였다. 여기서 Porous media에 적용된 다공판형상의 유동손실계수는 시험데이터를 바탕으로 정의하였다. 또한 다공판형상의 유동손실계수를 해석적으로 정의하기 위해 단위형상에 대한 압력손실을 계산하고 시험결과와 비교하였다. 마지막으로 휠로더 흡배기구를 단순화한 해석모델의 냉각해석 결과와 실차 방열시험 결과를 비교하였다. 이 연구를 통해 휠로더 흡배기구 단순화 해석기법의 적용 가능성을 확인하였으며 냉각성능 평가 및 개선 연구를 효과적으로 수행할 수 있는 기반을 마련하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2261-2266
• /
• 2007

In this study, the numerical analysis to estimate condensation heat and mass transfer of the condenser was carried out using the PMA (porous medium approach). In the PMA, the details of tube bundle in the condenser are replaced by the porous medium, and the flow resistance term is added in the momentum equation. In this regard, the PMA is quite helpful for the study of tube bundle in the large condenser. The pressure loss through tube bundle can be compensated by viscous and inertial momentum sink terms, which was validated numerically. Value of the pressure drop was compared to that of Butterworth correlation. Three dimensional analysis of condensation for McAllister condenser with the PMA was conducted using Fluent 6.2 and UDFs (use-defined functions). The result of condensation rate was analogous to previous results (experimental and numerical data).

• 대한기계학회논문집B
• /
• 제40권10호
• /
• pp.667-672
• /
• 2016

본 연구는 다공성 재질의 목을 가진 벤츄리관 공기방울 발생장치의 설계를 위해 수행되었다. 주어진 공급 유량 조건 하에서 다공성 재질을 통해 공급되는 공기방울의 공급 성능 최대화를 위한 벤츄리관의 길이와 직경을 결정하기 위해 2상 전산유동해석에 기초한 최적화 설계를 수행하였다. 이러한 일련의 연구 수행 결과를 통해 다공성 재질을 통해 공급되는 공기방울의 공급 성능 최대화를 위한 공급유량과 이들 설계변수들 관계를 규명하였다.

• 대한기계학회논문집B
• /
• 제33권11호
• /
• pp.886-893
• /
• 2009

To develop glass panel vacuum lift system for the post process in module line of FPD(Flat panel display) such as LCD and PDP, new vacuum adsorption parts of this system are proposed. These parts are composed of variable geometry configurations utilizing ceramic porous medium for variable size of glass panels. In order to design this device, detail understanding of flow phenomena in the flow path of vacuum adsorption system is essential. Thus, CFD analysis and designs are performed for several configurations in terms of pressure drop and balancing force at the adsorption side. From the result, new configuration is recommended for optimum design and manufacturing purpose.

• 설비공학논문집
• /
• 제9권4호
• /
• pp.446-453
• /
• 1997

The superconducting winding in rotor of a superconducting generator should be kept at extremely low temperature of 4-5 K to maintain the superconducting state. For this purpose the liquefied helium is used for the coolant and it is very important to analyze and design a cooling system making effective use of the coolant. In this paper, the typical heat exchanger of a superconducting generator with the flow passage is analyzed with regard to the thermal equilibrium. An experimental constant relevant to the flow condition in the flow passage is determined with heat exchange experiments in cryostat. Also a new heat exchanger with porous material is proposed and designed. Results of the numerical analysis for the temperature distributions for the torque tube and the coolant are reported and the efficiency of the heat exchanger is discussed from the viewpoint of amounts of coolant needed.

• 한국기계가공학회지
• /
• 제21권2호
• /
• pp.1-10
• /
• 2022

Exhaust gases emitted from internal combustion engines contain nitrogen oxides (NOx) and sulfur oxides (SOx), which are major air pollutants causing acid rain, respiratory diseases, and photochemical smog. As a countermeasure, scrubber systems are being studied extensively. In this study, the pressure drop characteristics were analyzed by changing the exhaust gas inflow velocity using a scrubber for a 700 kW engine as a model. In addition, the fluid flow inside the scrubber and the behavioral characteristics of the droplets were studied using CFD, and the design compatibility of the cleaning device was verified. Flow analysis was performed using inertial and viscous resistances by applying porous media to the complex shape of the scrubber. The speed of the exhaust passing through the outlet nozzle from the inlet was determined through the droplet behavior analysis by spraying, and the flow characteristics for the pressure drop were studied. In addition, it was confirmed through computational analysis whether there was a stagnation section in the exhaust gas flow in the scrubber or the sprayed droplets were in good contact with the exhaust gas.

• 설비공학논문집
• /
• 제18권1호
• /
• pp.7-16
• /
• 2006

Both the computational and experimental analysis have been conducted in this study to develop the high efficiency agriculture products dryer by the uniform thermal flow distribution in the drying room. It has been developed based on the results of the computation and experiment in the conventional dryer to improve the thermal flow distribution in drying room. The developed dryer can be prevented the local concentration of the heated wind and achieved the uniform flow distribution using the installation of vertical branch ducts, ribs, guide vanes and porous plates. As a result, the developed dryer reduced the fuel consumption up to $15\%$ and the electricity consumption up to $31.5\%$ compared with the conventional dryer.

• 플랜트 저널
• /
• 제9권3호
• /
• pp.48-52
• /
• 2013

본 연구에서는 전산유체해석(CFD)을 통하여 SCR 탈질설비 내부의 유동장 흐름을 전산모사하였다. 또한 유동장의 균일도를 분석하기 위해 기존 설비에 대한 해석을 수행하였으며 이를 통해 문제점을 도출하고 개선하였다. 개선방안으로는 곡관에 guide vane을 설치하여 곡관상에 기류를 균일하게 안내해 주었으며, baffle을 설치하여 SCR설비로 초기 유입된 기류의 균일한 공간 분포를 도출하였다. 마지막으로 porous plate를 baffle 하단에 설치하여 균일류 형성의 최적화 모델을 도출하였다.