• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.669-675
• /
• 2011

다공성 구조로 되어있는 차세대 저유전 박막(k<2.0)의 나노 기공의 초기 형성 과정을 이해하기 위하여 실세스퀴옥산(silsesquioxane; SSQ) 매트릭스에서 분산된 4-tert-butyl calix[4]arene-O,O',O",O"'-tetraacetic acid tetraethyl ester(CA[4]) 포로젠이 열분해에 의해서 나노 기공으로 전환되는 과정을 Fourier Transform Infrared Spectroscopy(FT-IR)와 in-situ Position Annihilation Lifetime Spectroscopy(PALS) 연구를 통해 분석하였다. SSQ/CA[4] 하이브리드 시스템은 열 경화에 따라 효과적인 기공 구조의 균일한 박막을 제공하였다. SSQ/CA[4] 10, 20% 두 종류의 하이브리드 박막을 in-situ PALS 분석을 시행한 결과, CA[4] 포로젠의 분해 거동이 달랐다. SSQ/CA[4] 10% 하이브리드 박막은 $300^{\circ}C$ 이상부터 단분자 포로젠으로부터 기인한 메조포어(~1.5 nm)가 생성되기 시작하였으나, SSQ/CA[4] 20% 하이브리드 박막은 상대적으로 낮은 온도인 $250^{\circ}C$부터 상태로 CA[4] 분자들이 자가 조립된 마이셀로부터 기인한 메조포어(2.5~3.0 nm)가 생성되었다. 이는 SSQ/CA[4] 20% 하이브리드 박막에서 생성된 기공의 구조가 매우 연결된 상태이기 때문에 초기에 포로젠이 분해되었을 때, 분해된 분자조각들이 쉽게 박막 외부로 빠져나올 수 있기 때문이라고 생각된다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 춘계 총회 및 학술발표회
• /
• pp.73-77
• /
• 2004

막분리 기술인 정밀여과와 한외여과는 물질의 크기 차에 따른 체분리 (sieving)를 기본 원리로 하기 때문에 분자수준에서의 선택적 물질분리가 어렵다는 문제점이 있다. 이러한 문제점을 해결하기 위한 대안으로서 분리막에 분자수준에서의 물질 선택성을 부여한 친화성 막(affinity membrane) 제조에 대한 연구가 활발히 이루어지고 있다.(중략)

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 춘계 총회 및 학술발표회
• /
• pp.1-14
• /
• 2005

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.298-298
• /
• 2006

There has been much interest in incorporating nanoscale voids into dielectric materials in order to reduce their k value, and thus in producing low-k porous interdielectric materials. One approach to the development of low-k dielectric materials is the templated polycondensation of organosilicate precursors in the presence of a thermally labile, organic polymeric porogen. The other is SiOCH films have low dielectric constant as well as good mechanical strength and high thermal stability through PECVD. In this article we explore the nanopore generation mechanism of organosilicate film using star-shape porogen and SiOCH film using bis-trimethylsilylmethane (BTMSM) precursor.

• 멤브레인
• /
• 제19권2호
• /
• pp.113-121
• /
• 2009

실리카 입자를 기공 형성제로 사용하여 물리적 강도와 단백질 결합용량이 높은 다공성 키토산 및 키틴 친화 막을 제조하였다. 키토산 친화 막의 BSA 단백질 결합용량은 최대 21.8mg/mL이었으며, 키틴 친화 막의 lysozyme 효소 결합용량은 최대 26.1mg/mL이었다. 제조된 다공성 키토산 및 키틴 친화 막을 사용하여 단백질 용액의 loading 유량, loading 양 및 농도 변화에 따른 BSA와 lysozyme의 친화 막 여과 크로마토그래피 분리 실험을 수행하였다. 친화 막 여과 크로마토그래피 분리 실험을 통해 얻어진 loading/washing/elution의 단계로 구성된 일련의 크로마토그램으로부터 단백질 용출량과 결합수율을 구하였다. 키토산 및 키틴 친화 막에의 BSA 및 lysozyme 단백질의 결합량과 결합수율은 loading용액의 유량이 작을수록, 주입량 및 농도가 클수록 증가하였다. 이 결과로부터 실리카 입자를 기공 형성제로 사용하여 제조된 다공성 키토산 및 키틴 막은 단백질의 대규모 여과 크로마토그래피 분리를 위한 친화 막으로서 효과적인 활용이 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1839-1844
• /
• 2013

Molecularly imprinted microsphere for chloramphenicol (CAP) with high adsorption capacity and excellent selectivity is prepared by aqueous suspension polymerization, in which chloramphenicol is used as template molecule and ethyl acetate as porogen. The CAP-imprinted microspheres are used as high performance liquid chromatography (HPLC) stationary phase and packed into stainless steel column ($150mm{\times}4.6mm$ i.d.) for selective separation of chloramphenicol. HPLC analysis suggests that chloramphenicol can be distinguished from not only its structural analogs but also other broad-spectrum antibiotic such as erythromycin and tetracycline. In addition, the binding experiments of CAP-imprinted microspheres are carried out in ethanol/water (1:4, V:V), the results indicate that the maximum apparent static binding capacity of molecularly imprinted microspheres is up to 66.64 mg $g^{-1}$ according to scatchard model.

• 한국정밀공학회지
• /
• 제33권1호
• /
• pp.63-67
• /
• 2016

We present a method of fabricating poly (lactic-co-glycolic acid) (PLGA) porous microfibers using a pore template. PLGA microfibers were synthesized using a glass capillary tube in a poly-(dimethylsiloxane) (PDMS) microfluidic chip. Gelatin solution was used as a porous template to prepare pores in microfibers. Two phases of PLGA solutions in different solvents-DMSO (dimethyl sulfoxide) and DCM (dichloromethane)-were used to control the porosity and strength of the porous microfibers. The porosity of the PLGA microfibers differed depending on the ratio of flow rates in the two phases. The porous structure was formed in a spiral shape on the microfiber. The porous structure of the microfiber is expected to improve transfer of oxygen and nutrients, which is important for cell viability in tissue engineering.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2330-2334
• /
• 2013

A highly selective molecularly imprinted polymer (MIP) for sarcosine, a cancer marker, was prepared and its use as solid-phase extraction (SPE) sorbent material was demonstrated. The MIP was prepared by a very simple procedure using methacrylic acid as functional monomer and a mixture acetonitrile/water (4/1, v/v) as porogen, overcoming in this way the problems usually related to the imprinting of biological polar compounds. The MIP was tested in batch experiments in order to evaluate its binding properties and then used as SPE sorbent for the selective clean-up and pre-concentration of sarcosine. The extraction protocol was successfully applied to the direct extraction of sarcosine from spiked human urine indicating that the MIP allowed sarcosine to be pre-concentrated while simultaneously interfering compounds were removed from the matrix.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권6호
• /
• pp.503-509
• /
• 2006

Molecularly imprinted polymeric microbeads (MIPMs) were prepared by the suspension and modified suspension polymerization methods using D-phenylalanine as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linker, toluene as the porogen, polyvinyl alcohol as the stabilizer, and sodium dodecyl sulfate as the surfactant. The addition of a surfactant to the conventional suspension polymerization mixture decreased the mean particle size of the MIPMs and increased the adsorption selectivity. For the modified suspension polymerization method, the mean particle size of the MIPMs was smaller than the particle size of MIPMs prepared via conventional suspension polymerization. Moreover, the adsorption selectivity improved considerably compared to the adsorption selectivities of MIPs reported previously.

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.70-79
• /
• 2015

To establish the optimal conditions for the manufacture of high absortive cellulose film(CF) originated from Styela clava tunic(SCT), the physicochemical properties included absorption was measured in CFs prepared under the various conditions. The highest absorption was observed for SCT-CF20 prepared from the cellulose solution dissolved at $80^{\circ}C$ for 20min, although the filtration treatment did not induce any significance alteration. Also, the absorption was higher in SCT-CF20-F prepared by the freeze drying than SCT-CF20-N(ambient air drying) and SCT-CF20-H(heat drying). The addition of porogen($NaHCO_3$) induced an increase of absorption in SCT-CF20-PF relative to SCT-CF20-F, while the number of interconnected porous structures was enhanced in SCT-CF20-PF. Furthermore, a high level of SK-MEL-2 cells viability was observed in SCT-CF20-PN and SCT-CF20-PF cultured group. These results show that SCT-CF may have high absorption and biocompatibility when prepared from SCT cellulose solution dissolved at $80^{\circ}C$ for 20min after addition of porogen and then subjected to freeze drying.