• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.497-500
• /
• 2004

Recently, the use of structure compound waterproof agent (hereinafter referred to as 'SCWA') that is used when manufacturing concrete for concrete structures, increases in quantity. However, while it is expected that the SCWA that is mixed in the concrete inside can significantly affect the change of physical properties that lift the internal force of a structure. This study has been conducted through an experiment for the effects of cement hardener on the formation of microscopic texture, and newly generated hydrates from that result were not confirmed in the present experiment. It was found that at the hydrate reaction it has the property that can be hardened within the limit of pore diameterar a specific size rather than there is the internal gap filling capacity due to generating other hydrates.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.777-780
• /
• 2004

Recently, the use of structure compound waterproof agent (hereinafter referred to as 'SCWA') that is used when manufacturing concrete for concrete structures, increases in quantity. However, while it is expected that the SCWA that is mixed in the concrete inside can significantly affect the change of physical properties that lift the internal force of a structure. This study has been conducted through an experiment for the effects of cement hardener on the formation of microscopic texture, and newly generated hydrates from that result were not confirmed in the. present experiment. It was found that at the hydrate reaction it has the property that can be hardened within the limit of pore diameterar a specific size rather than there is the internal gap filling capacity due to generating other hydrates.

• Structural Engineering and Mechanics
• /
• v.29 no.1
• /
• pp.1-16
• /
• 2008

Tunnels are generally constructed below the ground water table, which produces a long-term interaction between the tunnel lining and the surrounding geo-materials. Thus, in conjunction with tunnel design, the presence of water may require a number of considerations such as: leakage and water load. It has been reported that deterioration of a drainage system of tunnels is one of the main factors governing the long-term hydraulic and structural lining-ground interaction. Therefore, the design procedure of an underwater tunnel should address any detrimental effects associated with this interaction. In this paper an attempt to identify the coupled structural and hydraulic interaction between the lining and the ground was made using a numerical method. A main concern was given to local hindrance of flow into tunnels. Six cases of local deterioration of a drainage system were considered to investigate the effects of deterioration on tunnels. It is revealed that hindrance of flow increased pore-water pressure on the deteriorated areas, and caused detrimental effects on the lining structures. The analysis results were compared with those from fully permeable and impermeable linings.

• 연구논문집
• /
• s.24
• /
• pp.81-96
• /
• 1994

To investigate failure mechanisms observed in carbon-phenolic thermal insulators, differential equations which govern the decomposition process in a deformable anisotropic porous solid are derived for three-dimensional axisymmetric constructions. The governing equations not only couple the material deformation with pore pressure, but also couple pressure and temperature, which means that heat convected by the pyrolysis gases is properly accounted for. Then the Bubnov-Galerkin finite element method is applied to these equations to transform them into a semidescrete finite element system. A thermal insulation liner in the cowl region under typical operating conditions is analyzed to find a mechanism for plylift. The results from the structural analysis show across-ply failure in the cowl zone. The mechanism for plylift is hypothesized as a sequential procedure : 1) the across-ply failure which is the precursor to plylift and 2) the local fiber buckling caused by generation of excessive in-plane compressive stress. To prevent plylift, the across-ply stress can be reduced by using appropriate material ply angles in cowl zone design.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.33-33
• /
• 2010

Recently, a self-organizing process that occurs during the anodization of aluminum in acidic electrolytes has attracted a vast amount of research attentions, coupled with the ever-increasing demand for the development of effective, inexpensive and technologically simple methods for the synthesis of low-dimensional nanostructures over a macroscopic area overcoming many of the drawbacks of conventional lithographic techniques. In this presentation, recent progress in the fabrication of ordered nanoporous anodic aluminum oxide (AAO), including conventional anodization techniques, newly developed pulse anodization, hard anodization processes, and generic approaches to three-dimensional pore structures with periodically modulated diameters. Discussion will also cover the applications of AAO for the development of structurally well-defined extended arrays of low-dimensional nanostructures, such as nanodots, nanotubes, and nanowires, which could be model systems in investigating a diverse range of research problems in chemistry and physics and also be starting materials in realizing advanced electronic devices.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.140-141
• /
• 2020

Concrete has a lower thermal conductivity or thermal diffusion coefficient compared to other building materials, so it is widely used as fireproof compartment material or refractory material for structures. However, in the event of thermal damage such as fire, cement curing agents and aggregates act differently, resulting in heat generation or deterioration of tissue due to dehydration, resulting in deterioration of physical properties and fire resistance. Therefore, in this study, the processing structure of cement paste is measured through nitrogen absorption method. The test specimen is a cement paste of 40% W/C and is set at 1000 ℃ under heating temperature conditions. As the temperature rose, the micro-pore mass below was reduced based on about 0.01 감소m, but the air gap above that was increased.Thus, in the range of pores measured in nitrogen adsorption, the air mass tended to decrease under high temperature conditions.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.55-63
• /
• 2020

In this study, a scaled model test of the shaking table and a seismic analysis considering effective stresses were performed to reveal the dynamic behavior characteristics of box structures deep located in multi-layered soils upon seismic loading. The input seismic wave was operated below the ground using five seismic waves, including long period wave (Hachinohe), short period wave (Ofunato), artificial wave and real earthquakes that occurred in Gyeong-ju and Po-hang. As a result of model test and numerical analysis, the vertical displacement of box structures upon seismic loading was greater than that of horizontal direction, and it was confirmed that an increase of excess pore water pressure below the foundation ground caused a displacement. In addition, behavior of the ground and structures during artificial seismic wave appeared to be larger than real earthquake wave.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.471-484
• /
• 2019

Liquefaction occurs by a temporal loss of sediment strength as a consequence of increased pore water pressure during the re-arrangement of unconsolidated, granular sediments. Liquefaction is dependent on the physical properties of the sediments and cause surface cracks, landslide, and the formation of soft-sediment deformation structures(SSDS). SSDS is formed by the combined action of the driving force and deformation mechanism(liquefaction, thixotropy, and fluidization) that is triggered by endogenic or exogenic triggers. So research on the SSDS can unravel syndepositional geological events. If detailed sedimentologic analysis together with surrounding geological context suggest SSDS formed by earthquakes, the SSDS provide a clue to unravel syndepositional tectonic activities and detailed paleoseismological information(> Mw 5) including earthquakes that leave no surface expression.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.53-59
• /
• 2021

Purpose & Method: The purpose of this study is the theoretical study on the durability standard of ground structures monitoring sensors. A survey on the durability criteria for construction monitoring sensors of domestic construction companies and the income tax implementation regulations, the standard years of contents such as buildings and the standards of the Public Procurement Service for construction monitoring and construction machinery were analyzed. Result: The durability criterion such as the inclination meter and the strain gauge, which are purchased from the Public Procurement Service prior to installation on the ground structure, is 8 to 10 years. Conclusion: The actual durability analysis by comparing the reliability of various monitoring sensors installed in dams at home and abroad, As a result of comprehensive study on the loss and damage rate of the maintenance monitoring sensor installed in the tunnel, the proper durability period of the built-in type monitoring sensor such as domestic pore pressure meter and earth pressure meter installed in the structure or the ground is 5 to 8 years it seems reasonable.

• Steel and Composite Structures
• /
• v.51 no.2
• /
• pp.185-202
• /
• 2024

In this research paper, and for the first time, wave propagations in sigmoidal imperfect functionally graded material plates are investigated using a simplified quasi-three-dimensionally higher shear deformation theory (Quasi-3D HSDTs). By employing an indeterminate integral for the transverse displacement in the shear components, the number of unknowns and governing equations in the current theory is reduced, thereby simplifying its application. Consequently, the present theories exhibit five fewer unknown variables compared to other Quasi-3D theories documented in the literature, eliminating the need for any correction coefficients as seen in the first shear deformation theory. The material properties of the functionally graded plates smoothly vary across the cross-section according to a sigmoid power law. The plates are considered imperfect, indicating a pore distribution throughout their thickness. The distribution of porosities is categorized into two types: even or uneven, with linear (L)-Type, exponential (E)-Type, logarithmic (Log)-Type, and Sinus (S)-Type distributions. The current quasi-3D shear deformation theories are applied to formulate governing equations for determining wave frequencies, and phase velocities are derived using Hamilton's principle. Dispersion relations are assumed as an analytical solution, and they are applied to obtain wave frequencies and phase velocities. A comprehensive parametric study is conducted to elucidate the influences of wavenumber, volume fraction, thickness ratio, and types of porosity distributions on wave propagation and phase velocities of the S-FGM plate. The findings of this investigation hold potential utility for studying and designing techniques for ultrasonic inspection and structural health monitoring.