• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1499-1502
• /
• 2005

Dense $BaMgAl_{10}O_{17}:Eu^{2+}$ phosphor particles with a spherical shape have been synthesized through spray pyrolysis method using basic aluminum nitrate precursor as a spray solution. This $BaMgAl_{10}O_{17}:Eu^{2+}$ particles prepared by the spray pyrolysis have shown the stronger emission intensity compared to the commercially-available $BaMgAl_{10}O_{17}:Eu^{2+}$. However, thermal stability of the BAM:Eu b lue phosphor is very poor due to changing from $Eu^{2+}$ to $Eu^{3+}$ at the thermal process, so brightness of the phosphor decreases. To improve the thermal stability of the dense BAM:Eu phosphor, the spherical BAM:Eu particles were coated with pure $BaMgAl_{10}O_{17}$ layer using the hydrolysis reaction in a solution system. The synthesized powders were characterized by XRD, SEM and PL. On the other hand, the emission properties of the BAM:Eu phosphors coated with $BaMgAl_{10}O_{17}$ layer before and after thermal treatment at $500^{\circ}C$ for 30 min were estimated under VUV excitation. The brightness of the coated phosphor was higher than that of the uncoated phosphor. Also, the coating thickness of BAM layer in the BAM:Eu particles was optimized.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.12
• /
• pp.755-760
• /
• 1999

Various fluoride films were investigated for a gate insulator of thin film transistor application. Conventional oxide containing materials like $SiO_2\;Ta_2O_5\; and \; Al_2O_3$ exhibited high interface states which lead to an increased threshold voltage and poor stability of TFT. In this paper, we investigated gate insulators using a binary matrix system of fluoride such as $CaF_2,\; SrF_2\; MgF_2,\; and\; BaF_2$. These materials exhibited an improvement in lattice mismatch, interface state and electrical stability. MIM and MIS devices were employed for an electrical characterization and structural property examination. Among the various fluoride materials, $CaF_2$ film showed an excellent lattice mismatch of 5%, breakdown electric field higher than 1.2MV/cm and leakage current density of $10^{-7}A/cm^2$. MIS diode having $Ca_2$ film as an insulation layer exhibited the interface states as low as $1.58\times10^{11}cm^{-2}eV^{-1}$. This paper probes a possibility of new gate insulator materials for TFT applications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1722-1728
• /
• 2002

Most researches regarding emulsified fuel were in the areas of emulsifier, emulsified fuel manufacturing and emulsified fuel droplet combustion, but there were little papers published regarding emulsified fuel combustion and boiler efficiency in an industrial boiler. The main purpose of this study is to clarify whether improvements in the boiler efficiency and the reduction of pollutants such as CO, NOx, SOx and smoke exist or not when emulsified fuels are combusted in the commercial boiler. Main experimental parameters were water content in heavy oil , excess $O_2$, and boiler load. The fuels used in this experiment were 0.5 B-C, and 5 kinds of 0.5 B-C/water emulsified fuels. The combustion characteristics of heavy oil and its emulsions with water were investigated in an industrial boiler. The combustion stability was monitored and exhaust gases such as CO, NOx, SOx and smoke were measured with excess $O_2$ and combustion load. In case of emulsified fuel combustion, flame stability was poor and boiler efficiency was lowered by 1.6~5.7%, but emission levels of CO and smoke were improved.

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.1
• /
• pp.55-60
• /
• 2017

The dyeing sludge can be weakened by inflow of rainfall or absorption of moisture after it is buried in a waste landfill. This study tested the dyeing sludge and earth/sand mixture to check the problem when the dehydrated dyeing sludge is buried in a waste landfill. When the dyeing sludge was left idle with high water content inside a landfill with poor draining for a long period, the water permeability decreased to around 3/100 level and the compressibility increased by 1.4 times compared to the dyeing sludge at a dyeing factory. The study result indicated that it was important to reduce the water content inside the landfill for stability. Also, the facilities to secure the drainage path and eliminate leachate were needed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.383-383
• /
• 2011

Generally, field emitters can be categorized into two types according to the emitter shape, one is a planar field emitter and the other is a point emitter. The planar field emitter is used for displays, flat lamps and signage boards. On the other hands, the point field emitter is expected to play a significant role in x-ray sources and electron beam sources. Such applications of the point field emitters, especially, need large emission current and high emission stability with a small electron beam size. A few reports announced point emitters made by carbon nanotubes (CNTs). However, they still have suffered from poor reproducibility and low emission current. Here, we demonstrated high performance CNT point emitters by attaching CNTs onto graphite rod. Graphite rod exhibited good electrical conductivity and chemical stability. In this method, the shape of the point emitter could be easily controlled by changing the length and diameter of the graphite rod. The CNT point emitter showed emission current over 1 mA at an applied electric field of 1.4 V/${\mu}m$. We consider that the stable emission performance is attributed to the stable contact between CNTs and graphite rod.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.67-73
• /
• 2012

In this paper, in order to overcome the disadvantage of wireless-based sensor network, a hybrid sensor network using wired and wireless linkage is proposed. Proposed a wired and wireless linkage hybrid sensor network can compensate the defect of poor transmission at the indoor wireless environment, and can be free from interference between a wireless LAN and Bluetooth of the same frequency bandwidth due to an attribute of low-loss transmission at the CATV network. Also, proposed a wired and wireless linkage hybrid sensor network make use of CATV network which is well-built infrastructure, is more efficient to design network, assure a stability and high reliability of the sensor network as providing a stability for an inaccuracy and a predictable transmission link for the existing wireless network.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.157-159
• /
• 2005

MOS capacitors were fabricated to study electrical and chemical properties of Ta-Mo metal alloy with $ZrO_2$. The work function of Ta-Mo alloy were varied from 4.1eV to 5.1eV by controlling the composition. When the atomic composition of Mo is 10%, good thermal stability up to $800^{\circ}C$ was observed and work function of MOS capacitor was 4.1eV, compatible for NMOS application. But pure Ta exhibited very poor thermal stability. After $600^{\circ}C$ annealing, equivalent oxide thickness of tantalum gate MOS capacitor was continuously decreased. Barrier heights of Ta-Mo alloy and pure metal that supported the work function values were calculated from Fowler-Nordheim analysis. As a result of these electrical?experiments, Ta-Mo metal alloy with $ZrO_2$ is excellent gate electrode for NMOS.

• Journal of Powder Materials
• /
• v.25 no.6
• /
• pp.459-465
• /
• 2018

Most commercially available detonation nanodiamonds (DNDs) require further processing to qualify for use in biomedical applications, as they often contain many impurities and exhibit poor dispersibility in aqueous media. In this work, DNDs are modified to improve purity and impart a high colloidal stability to the particles. The dispersive and adsorption properties of modified DNDs are evaluated in terms of the suitability of DNDs as carriers for non-steroidal anti-inflammatory drugs (NSAIDs) in transdermal delivery. The study of adsorption on strongly positively and strongly negatively charged DNDs showed their high loading capacity for NSAIDs, and a pronounced relationship between the drugs and the particles' charges. Experiments on long-term desorption carried out with DND/NSAID complexes indicate that the nanoparticles exert a sustained effect on the drug release process.

• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.7-13
• /
• 2019

Recycling of waste polyvinyl chloride plastics has attracted much attention due to environmental problems, but the poor mechanical properties, low thermal stability, frequent breakage of strands, and melt cracking of the waste plastics have limited their widespread use. To overcome these disadvantages of waste PVC (W-PVC), recycled PVC powder blend was prepared by adding high-density polyethylene (HDPE) and ethylene vinyl acetate (EVA) as a heat stabilizer and compatibilizer, respectively. An intermeshing co-rotating twin screw extruder was used to prepare the blend, and the characteristics of the blend were analyzed by SEM and TGA, and by using a UTM and Izod impact tester. The impact strength was improved as the EVA content increased for the W-PVC/HDPE (80/20 wt%) blend. As the HDPE and EVA contents increased in the W-PVC/HDPE/EVA blend, the impact strength increased. SEM observations also revealed the improved interfacial adhesion for the EVA-containing blend.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.42-42
• /
• 2018

Anthocyanins has a strong antioxidant capacity but exhibit poor stability in water. Therefore, stability of anthocyanin from purple potato (Solanum tuberosum L.) was encapsulated by the application of food polymers. Solid formulation of purple potato was prepared using whey protein, tapioca and lecithin by capillary rheometer at $80^{\circ}C$. The ratio of the polymer and potato powder was 2:8. Total phenolic compound, total flavonoid, total anthocyanin and antioxidant activity was investigated by the spectrophotometer. Result revealed that total phenolic compound (TP) ($5321{\mu}g/100g$), total flavonoid (TF) ($1352{\mu}g/100g$) total anthocyanin (TA) ($764{\mu}g/100g$) and free radical antioxidant activity (DPPH) (86%) was higher in 0.01 M acetic acid mediated lecithin based formulation compared to control (Potato powder) (TP: $1357{\mu}g/100g$; TF) ($634{\mu}g/100g$, TA) ($264{\mu}g/100g\;DPPH$) (64%). Lecithin is a strong emulsifier having capacity to extract bioactive compound and encapsulate extracted compound by nonpolar tail and negatively charged head. Therefore, it would be concluded that lecithin might be used as an encapsulating agent for the bioactive compound from purple potato.