• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4756-4762
• /
• 2014

Damaged wind turbine blades are repaired conventionally using a hand lay-up method with epoxy, where the bonding strength is not high. Epoxy has poor curing characteristics at low temperatures. The infusion method with polyester was proposed. Infusion method is believed to distribute resin uniformly. Polyester is used because it hardens better than epoxy at low temperatures. At room temperature, the proposed method increased the bonding strength by 77.7% compared to the conventional method. Using the proposed method at 15 and $5^{\circ}C$, the bonding strength increased compared to the conventional method. This paper proposes a new method for repairing wind turbine blades, even at temperatures where the conventional method cannot be used because epoxy resin does not harden. The bonding strength of the proposed method at low temperatures is higher than that of the conventional method at room temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4950-4960
• /
• 2014

This study examined the factors affecting submarine crews' turnover intention. This study reviewed previous research-related turnover in military organizations. The measurement was designed based on the Kano model, which was originally used to survey the customers' satisfaction with a service or a product. The authors conducted a questionnaire survey of 408 submarine crew, from 1, Nov to 30, Nov, 2013. The results showed that the factors that impact the submarine crews' turnover were the sense of insecurity due to the a poor working environment of the submarine, physical risks due to the water pressure, anxiety due to the closed space, and insecure rank-limited promotion system. The paper discusses the implications of the results from the perspective of military social welfare and provides recommendations for setting up the policy for submarine crews' welfare based on the study result.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.11 no.2
• /
• pp.76-80
• /
• 2015

Mental retardation is one of the major disorders covered in special care dentistry. Patients show poor oral health and are a challenge for the dentist due to lack of cooperation. Triazolam is a short-acting benzodiazepine and has been used in the dental office for many years because of its favorable properties. In this study, five patients with mental retardation were sedated with triazolam on a dental out-patient setting. Patients were administrated with 0.25 mg or 0.5 mg of triazolam on the first dose according to the patient's cooperation. Twenty minutes after the initial dose, patients received 0.25 mg of triazolam. Triazolam was administrated sublingually to one patient and orally to four patients. Hydroxyzine was also administrated to three patients in order to prevent nausea and vomiting. All patients were inhaled with 50% nitrous oxide during the sedation. Treatment time ranged from 20 minutes to 55 minutes. Two patients showed paradoxical reactions and were administrated with intramuscular injections of flumazenil. In result, depending on the range of dental treatment and level of intellectual disability, we can assume that triazolam may be beneficial for sedation in disabled patients.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7917-7924
• /
• 2015

In this study, based on CMA which is increasingly used for eco-friendly deicing materials, dehumidification MB made of sodium carbonate, $MgCl_2$/MgO (M/M), and SAP is to be produced. And its moisture absorption rate and dehumidification performance of the film are to be analyzed. And the data on the materials used for the dehumidification film are to be acquired. In case of the dehumidification MB, in which CMA and SAP are mixed, had poor film machinability due to foaming and moisture issues, but adding bentonite and calcium carbonate solved the problem. When a foaming agent was added to extend surface area between substances, CMA and M/M showed no remarkable difference, but SC showed large increase to 3.15 g/g. As the result of anti-corrosive test, CMA dehumidification film showed no corrosion while SC showed pitting corrosion and M/M showed corrosion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5838-5842
• /
• 2011

The study mainly aims to explore how deterioration of motor control center, namely MCC, and vibration put impact on temperature of bus bar as well as temperature change of bolt-nut joint. The motor control center consists of three internal parts (i.e. R, S, T) which are for motor operation of high capacity. Two dimensional mechanism for measuring temperature was designed and manufactured with infrared temperature sensor. Installing it in inner motor control center enabled researcher to monitor temperature of bus bar as well as amount of change of current regularly. Temperature change of bus bar according to load was primarily examined based on a bolted joint in the experiment. It was clearly verified that temperature change of bus bar was proportional to current consumption. Therefore, installing non-contact two dimensional mechanism for measuring temperature in motor control center would be expected to prevent temperature rise owing to overload current and power outage as well as fire accident which can be triggered by poor electrical contact.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1175-1181
• /
• 2015

This study applied comparative analysis on the need of medical checkup and subjective oral health of adults above 19 years old based on based on the 5th primitive data of Korea National Health and Nutrition Examination. From the analysis of the need of medical checkup for left and right molar teeth on upper and lower jaw, it is reported that 90% of the cases that cognize themselves having poor oral health on the first and second moral tooth turned out no need of treatment and the same result has shown in the lower jaw. Also, the number of people who cognize their oral health as good on the first and the second moral tooth was only 10% of all and those who cognize their oral health neither good nor bad shows 96% of results in no need of treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1461-1468
• /
• 2015

Mostly mine support(Rock bolt and Support) which is currently general for reinforcements of a large scale tunnel is applied, Some executing a reinforcement to Poor ground by cast-in-place shotcrete. However On domestic mine conditions that couldn't having every time after mine tunnel excavation, it couldn't ensure the field batch plant which is a fixed in an issue of economies and site security, constructing it by supply gets from shotcrete materials combined in neighborhood ready mixed concrete manufacturing plants. carried shotcrete in ready mixed concrete manufacturing plants as migration length and time are falling off in quality. But, it is difficult for construction quality control By quality control arbitrariness absence at on-scene. In the present study, carry out Laboratory Test by kinds and percentages of accelerating agent for evalution of Mechanical Property and Durability of Shotcrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3284-3292
• /
• 2015

The purpose of this study was to investigate influencing factors and characteristics in Korean adults with diabetes by glycemic control groups. A secondary data analysis was conducted using the data of "The Fifth Korea National Health and Nutrition Examination Survey, 2012" in this study. Finally, 608 participants who adults with diabetes were used for analysis. Selected data were processed using the SPSS 21.0 program. Diabetes duration(OR: 1.70, 95% CI 1.03-2.92) and age(OR: 2.06, 95% CI 1.16-3.65), hypertriglyceridemia(OR: 2.45, 95% CI 1.21-4.98) were positively associated glycemic poor control group. Therefore considering these factors and individualized diabetes intervention by glycemic control group are helpful for adult patients with diabetes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3845-3857
• /
• 2015

This study is an analysis of the factors affecting the re-employment will and re-employment of the elderly workers, using the aging pannel(KLoSA). As a results of the analysis, re-employment will of high school graduates is higher than that of college graduates, but re-employment possibility is lower. This is somewhat contradictory results with other studies. This seems to be influenced by a large number of highly educated baby boomers' retire. 50s' re-employment will was lower than 60s'. As job factors, employed period and scale has a positive effect. In contrast, type of industry, job haven't. In order to induce the re-employment of the elderly, inhibiting expansion of self-employment, job creation, irregular and minimum wage system improvements, Customized services are needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3769-3777
• /
• 2015

Overseas Expansion is essential to expand domestic geospatial industries in a state of saturation. But current overseas expansion method has be limited to expand global market. Inter-industries convergence strategies may be most resonable alternative to expand global market through raising expansion possibility to developing countries with ODA funds and to developed countries with converging global competitive industries. This research analyzed the industry to develop a suitable way fusion between these industries. As a result, easiness of convergence, confidentiality of information, complementarity of poor infrastructure, responsiveness of various demands and sustainability of system are needed to successful convergence on multiple industries. This convergence framework is consists of geospatial convergence common framework based on cloud computing, inter-industries convergence model and institutional supporting system for overseas expansion.