• Nuclear Engineering and Technology
• /
• v.33 no.2
• /
• pp.209-224
• /
• 2001

The SSC-K system analysis code is under development at the Korea Atomic Energy Research Institute (KAERI) as a part of the KALIMER project. The SSC-K code is being used as the principal tool for analyzing a variety of off-normal conditions or accidents of the preliminary KALIMER design. The SSC-K code features a multiple-channel core representation coupled with a point kinetics model with reactivity feedback. It provides a detailed, one-dimensional thermal-hydraulic simulation of the primary and secondary sodium coolant circuits, as well as the balance-of-plant steam/water circuit. Recently a two-dimensional hot pool model was incorporated into SSC-K for analysis of thermal stratification phenomena in the hot pool. In addition, SSC-K contains detailed models for the passive decay heat removal system and a generalized plant control system. The SSC-K code has also been applied to the computational engine for an interactive simulation of the KALIMER plant. This paper presents an overview of the recent activities concerned with SSC-K code model development This paper focuses on both descriptions of the newly adopted thermal hydraulic and neutronic models, and applications to KALIMER analyses for typical anticipated transients without scram.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.391-394
• /
• 2006

Growth characteristics of methane-propane clathrate hydrate, growing under different undercooling conditions, was investigated. After the water within pressurized vessel was fully saturated with guest gas molecules by agitation, medium was rapidly undercooled and maintained at the constant temperature. The growth of hydrate was always Initiated with film formations at the upper bounding surface of liquid pool. The visual observation using microscope revealed detailed features of subsequent crystal nucleation, migration, growth and interference occurring within liquid pool. A number of small crystals ascended and settled at the hydrate film. When undercooling was small $({\Delta}T=3.2K)$, some of the settled crystals slowly grew into faceted columns. As the undercooling increased, the downward growth of crystals underneath the hydrate film became dendritic and occurred with greater rate and with finer arm spacing. The shapes of the floating crystals were diverse and included octahedron and triangular or hexagonal platelet When the undercooling was small, the octahedral crystals were found dominant. As the undercooling increased, the shape of the floating crystals also became dendritic. The detailed characteristics of floating crystals were reported in this study.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.1
• /
• pp.15-21
• /
• 2019

Objective: The purpose of this study was to investigate the effects of aqua-noodles on the practice of underwater walking in patients with hemiplegia. Method: After an oral explanation and signing an IRB approved consent form 10 participants ($66.8{\pm}10.75yr$, $165.3{\pm}8.79cm$, $73.6{\pm}46kg$) agreed to participate in this study. Each of the participants was required to walk with the aqua noodles and without the aqua-noodles in a swimming pool. Each participant was asked to walk a distance of 5 m a total of 10 times, 5 with and 5 without the aqua-noodles. The depth of the swimming pool was at 1.3 m, approximately chest height. The following variables were calculated for analysis; height of the knee (m), knee joint ROM ($^{\circ}$), ankle joint ROM ($^{\circ}$), knee joint maximum angular velocity ($^{\circ}/sec$), and ankle joint maximum angular velocity ($^{\circ}/sec$). Results: First, there was a significant increase in time (s) for the maximum knee height to reach as well as the maximum knee height (m) increased when the participant used the aqua-noodles. Second, there was a statistically significant decrease in stride length when the aqua-noodles were used. Conclusion: This study helps to verify that the effect of underwater walking exercise can provide a suitable walking exercise environment. The results of this study provide systematic scientific information about how walking in water can be used for the rehabilitation of patients and the elderly.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3824-3832
• /
• 2022

Prompt capture gammas are an important part of the fission reactor gamma field. Because some of the structural materials after neutron capture can emit photons with high energies forming the dominant component of the gamma spectrum in the high energy region, the following study of the high energy capture gamma was carried out. High energy gamma radiation may play a major role in areas of the radiation sciences as reactor dosimetry. The HPGe measurements and calculations of the high-energy aluminum capture gamma were performed at two moderator levels in the VR-1 pool-type reactor. The result comparison for nominal levels was within two sigma uncertainties for the major 7.724 MeV peak. A larger discrepancy of 60% was found for the 7.693 MeV peak. The spectra were also measured using a stilbene detector, and a good agreement between HPGe and stilbene was observed. This confirms the validity of stilbene measurements of gamma flux. Additionally, agreement of the wide peak measurement in 7-9.2 MeV by stilbene detector shows the possibility of using the organic scintillators as an independent power monitor. This fact is valid in these reactor types because power is proportional to the thermal neutron flux, which is also proportional to the production of capture gammas forming the wide peak.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.240-245
• /
• 2001

Phenomena of direct contact condensation (DCC) heat transfer between steam and water are characterized by the transport of heat and mass through a moving steam/water interface. Application of the phenomena of DCC heat transfer to the engineering industries provides some advantageous features in the viewpoint of enhanced heat transfer. This study proposes a simple condensation model on the steam jets discharging into subcooled water from a single horizontal pipe for the prediction of the steam jet shapes. The analysis model was derived from the mass, momentum and energy equations as well as a thermal balance equation with condensing characteristics at the steam/water interface for the axi-symmetric coordinates. The extremely large heat transfer rate at the steam/water interface was reflected in the effective thermal conductivity estimated from the previous experimental results. The analysis results were compared with the experimental ones. The analysis model predicted that the steam jet shape (i. e. radius and length) was increasing as the steam mass flux and the pool temperature were increasing, which was similar in trend to that observed in the experiment.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.42-47
• /
• 2016

This paper presents the development of a floating outboard type of compact water jet propulsion system. The planning case of the water jet system is developed by performing precision processing after manufacturing FRP (Fiber Reinforced Plastics) from plug mold casting. This system is composed of an intake, impeller, diffuser, reverse bucket, and main shaft. In addition, a rebuilt engine was applied through marine engineering. The water jet propulsion system performance was verified to discharge a maximum $0.29m^3/s$ of flow rate and 37 m/s of flow velocity in a test pool on land. A field test was performed by installing the water jet propulsion device on board a ship that was tested off the coast of Korea. The weight of the hull, engine, and other equipment was approximately 1.2 tons, and the sailing speed was a maximum 22 knots at 3,600 rpm.

• Journal of the Korean Society of Safety
• /
• v.23 no.4
• /
• pp.1-6
• /
• 2008

This experiments are perfol1ned to investigate the effect of ventilation velocity on a high pressure water mist tire suppression in train. The experiment is conducted in half scale modeled train of a steel-welled enclosure (5.0m${\times}$2.4m${\times}$2.2m). The ventilation velocity is controlled by the ventilation duct through an inverter in the range of 0 to 3m/s. The coverage-radius and an injection angle of an high pressure water mist system are measured. The mist nozzle with 5-injection holes is operated with pressure 60bar. The heptane pool fires are used. The fire extinguishment times and the temperature are measured for the ventilation velocities. In conclusion, because the momentum of injected water mist is more dominant than that of ventilation air, the characteristics of water mist, the fire extinguishment times and the temperature are affected very little by ventilation velocity.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.57-65
• /
• 2009

Fire suppression tests are carried out for a train car using water mist systems. Three kinds of fire scenario applied to the real-scale train car are a surface fire representing car combustibles, a oil pool fire pretending an oil spill and a blocked fire for evaluation of space-cooling capacity. Five fixedpressure water mist systems and one self-contained water mist system with nitrogen gas are used for fire suppression experiments. Almost water mist systems can extinguish effectively train car fires, and fire-control capability of the system is seen due to the space cooling.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.4
• /
• pp.271-279
• /
• 2013

Water-soluble collagen (30 wt%) was entrapped within oil phase of lipstick using reversed micelle method to improve the moisture capacity of the lipstick. Reversed micelles containing collagen were prepared using caprylic/capric triglyceride as external phase and polyoxyethylene (10) octylphenyl ether (Triton X-100) and 1-dodecanol as surfactant and co-surfactant, respectively. The formation of reversed micelle encapsulating collagen was confirmed by measuring electric conductivity and UV-vis spectrum using methylene blue (MB). The stability and moisture capacity of the lipstick containing 20 wt% collagen encapsulated reversed micelles were observed by measuring rheology property, moisture content and amino acid content. The molecular ratio (W, water-pool) of water to surfactant (Triton X-100) in the most stable reversed micelle was ${\leq}$ 10. The hardness of the lipstick had no difference with that of the lipstick without reversed micelle, and the moisture content was increased to 59% and the amino acid content was 92.7%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.3
• /
• pp.275-280
• /
• 1995

The effect of supplemented high protein diet intake on renal urea regulation in swamp buffalo was carried out in the present experiment Five swamp buffalo heifers weighing between 208-284 kg were used for this study. The animals were fed with a supplementary high protein diet and renal function and kinetic parameters for urea excretion were measured. This was compared to a control period where the same animals had been fed only with paragrass and water hyacinth. For 2 months the same animals were fed a mixed of paragrass, water hyacinth plus 2 kgs of a high protein supplement (protein 18.2% DM basis) per head per day. In comparison to the control period, there were no differences in the rate of urine flow, glomerular filtration rate (GFR), effective renal plasma flow (ERPF), plasma urea concentration and filtered urea. In animals supplemented with high protein intake mean values of urea clearance, excretion rate and the urea urine/plasma concentration ratio markedly increased (p < 0.05) while renal urea reabsorption significantly decreased from 40% to 26% of the quantity filtered. In this same study group urea space distribution and urea pool size increased which coincided with an increase in plasma volume (p < 0.05). Plasma protein decreased while plasma osmolarity increased (p < 0.05). Both urea turnover rate and biological half-life of $^{14}C$-urea were not affected by a supplementary high protein intake. The results suggest that animals supplemented with high protein diets are in a state of dynamic equilibrium of urea which is well balanced between urea excreted into the urine and the amount synthesized. The limitation for renal tubular urea reabsorption would be a change in extra-renal factors with an elevation of the total pool size of nitrogenous substance.