• Journal of Pharmaceutical Investigation
• /
• 제12권3호
• /
• pp.55-63
• /
• 1982

The dissolution kinetics for polymorphs of sulpiride, the effect of polyethylene glycol 4000 on the dissolution kinetics of sulpiride polymorphs and the dissolution rate difference between the tablets of polymorph form I and form II were investigated. The results could be summerized as followings: 1. The dissolution rates of two polymorphs of sulpiride were significantly different and the thermodynamic parameters calculated from dissolution kinetics were as follows; transition temperature $98^{\circ}C$, enthalpy change, -2.108 kcal/mole, free energy change, -783 cal/mole $(31.0^{\circ}C)$. 2. The dissolution rates of the two polymorphs of sulpiride containing polyethylene glycol 4000 were significantly diefferent in 0.01N HCl but the effect of polyethylene glycol on the dissolution rates of two polymorphs was not significant at low concentration of polyethylene glycol 4000. The study on the effect by stirring speed showed that at lower stirring speed the promotion rate of dissolution of polymorph form I is greater than that of form II. 3. In the case of tablets the dissolution rates of polymorph form I of sulpiride was two fold as compared with the results obtained from form II.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.402-411
• /
• 2017

Combined LIBS-Raman spectroscopy has been widely studied, due to its complementary capabilities as an elemental analyzer that can acquire signals of atoms, ions, and molecules. In this study, the classification of polymorphs was performed by laser-induced breakdown spectroscopy (LIBS) to overcome the limitation in molecular analysis; the results were verified by Raman spectroscopy. LIBS signals of the $CaCO_3$ polymorphs calcite and aragonite, and $CaSO_4{\cdot}2H_2O$ (gypsum) and $CaSO_4$ (anhydrite), were acquired using a Nd:YAG laser (532 nm, 6 ns). While the molecular study was performed using Raman spectroscopy, LIBS could also provide sufficient key data for classifying samples containing different molecular densities and structures, using the peculiar signal ratio of $5s{\rightarrow}4p$ for the orbital transition of two polymorphs that contain Ca. The basic principle was analyzed by electronic motion in plasma and electronic transition in atoms or ions. The key factors for the classification of polymorphs were the different electron quantities in the unit-cell volume of each sample, and the selection rule in electric-dipole transitions. The present work has extended the capabilities of LIBS in molecular analysis, as well as in atomic and ionic analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.185-188
• /
• 2008

We have analyzed the structures of $Alq_3$ in different polymorphs by solid-state NMR. On the basis of the results, OLEDs were fabricated from different polymorphs of $Alq_3$. The current efficiency of the device fabricated from the mixture of $\alpha$-, $\gamma$-, and $\delta-Alq_3$ powders was higher than that from $\alpha-Alq_3$.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.400.2-400.2
• /
• 2002

Near-infrared(NIR) reflectance spectroscopy was employed to qualify various ploymorphs. We collected 8 potential polymorphs forms of Medicine T for this study. Near-infared spectra of the powder samples contained in glass vials were obtained over the wavelength region of 1100-1750nm. There were the peak around 1560nm in the 6 spectra among 8 spectra. Principal component analysis(PCA) has been performed to examine the qualitative difference of 8 polymorphs PC space. (omitted)

• Journal of Pharmaceutical Investigation
• /
• 제15권4호
• /
• pp.186-197
• /
• 1985

Polymorphs of piperacillin monohydrate were prepared by various sedimentation methods from piperacillin base for the purpose of developing piperacillin preparations for oral use. Solubility and dissolution rate of each form of the polymorphs were compared with each other. It was found that Form IV showed the highest solubility and the fastest dissolution rate among four forms of polymorphs. In general, the solubility and dissolution rate of two amorphous forms, Form IV and II were higher than those of two crystal forms, Form I and III. The apparent dissolution rates in the artificial gastric juice within 60 minutes were $0.65{\times}10^{-6}mole{\cdot}min^{-1}\;cm^{-2}$ for From IV, $0.36{\times}10^{-6}mole{\cdot}min^{-1}{\cdot}cm^{-2}$ for From II, $0.30{\times}10^{-6}mole{\cdot}min^{-1}{\cdot}cm^{-2}$ for From III and $0.18{\times}10^{-6}mole{\cdot}min^{-1}{\cdot}cm^{-2}$ for From I, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제14권2호
• /
• pp.200-206
• /
• 1993

Structures of two polymorphs of ${\alpha},{\alpha}$-trehalose octaacetate monohydrate, $C_{28}H_{38}O_{19}\;{\cdot}\;H_2O$, have been studied by X-ray diffraction method. ${\alpha},{\alpha}$-trehalose (${\alpha}$-D-glucopyranosyl ${\alpha}$-D-glucopyranoside) is a nonreducing disaccharide. The polymorph I belongs to the monoclinic $P2_1$, and has unit cell parameters of a=10.725(l), b=15.110(4), c=11.199(5) ${\AA}$, ${\beta}=108.16(2)^{\circ}$ and Z=2. The polymorph II is orthorhombic $P2_12_12_1$, with a=13.684(4), b=15.802(4), c=17.990(9) ${\AA}$ and Z=4. The final R and R$_w$ values for monoclinic polymorph I are 0.043 and 0.048 and for orthorhombic polymorph II are 0.116 and 0.118, respectively. Those R values of polymorph II are high because the large thermal motions of acetyl groups and the poor quality of the crystal. The molecular conformations in the two polymorphs are similar. Both D-glucopyranosyl rings have chair $^4C_1$ conformations and atoms of glycosidic chain ${\alpha}(1{\rightarrow}1)$ linkage are coplanar. The primary acetate groups of the pyranose residues assume both gauche-trans conformations. The molecules of two polymorphs have pseudo-C$_2$ symmetry at glycosidic O(1) atom. The bond lengths and angles are normal compared with those in other acetylated sugar compounds. The molecules in the monoclinic crystal are held by the hydrogen bonds with the water molecules and by van der Waals forces.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.751-753
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.299-302
• /
• 2007

• Archives of Pharmacal Research
• /
• 제7권1호
• /
• pp.47-52
• /
• 1984

Four polymorphic forms (I, II, III and IV) of hydrochlorothiazide have been characterized on the basis of x-ray diffractometry and differential thermal analysis. Form I was obtained by crystallization from N, N-dimethylformamide and Form II was crystallized from hot methanol. Form III was precipitated from sodium hydroxide aqueous solution by treatment with hydrochloric acid and Form IV was crystallized from 50% methanol. The metastable form I was a most stable form among four polymorphs, which was stable more than ten months at room temperature. The thermodynamic parameters such as heat of solution, enthalpy, entropy, free energy difference and transition temperature were determined by the measurement of intrinsic dissolution rate. The transition temperature and the heat of transition between the metastable Form I an Form II were determined to be $299.15^{\circ}$K and 5.03 Kcal/mole, respectively and free energy difference ($\delta$ F) was 302. 13 cal/mole. Diuretic action of these four polymorphic forms was also evaluated by monitoring the difference in urinary excretion of sodium, potassium and magnesium in rats.

• Journal of Microbiology and Biotechnology
• /
• 제23권5호
• /
• pp.707-714
• /
• 2013

Microbially induced calcium carbonate precipitation (MICCP) is a naturally occurring biological process that has various applications in remediation and restoration of a range of building materials. In the present investigation, five ureolytic bacterial isolates capable of inducing calcium carbonate precipitation were isolated from calcareous soils on the basis of production of urease, carbonic anhydrase, extrapolymeric substances, and biofilm. Bacterial isolates were identified as Bacillus megaterium, B. cereus, B. thuringiensis, B. subtilis, and Lysinibacillus fusiformis based on 16S rRNA analysis. The calcium carbonate polymorphs produced by various bacterial isolates were analyzed by scanning electron microscopy, confocal laser scanning microscopy, X ray diffraction, and Fourier transmission infra red spectroscopy. A strain-specific precipitation of calcium carbonate forms was observed from different bacterial isolates. Based on the type of polymorph precipitated, the technology of MICCP can be applied for remediation of various building materials.