• Journal of Magnetics
• /
• 제15권3호
• /
• pp.123-127
• /
• 2010

The use of a cooling fan in an induction cooker raises a reliability issue due to the attraction of dust causing a malfunction of the cooling fan and also increases the noise level and power consumption of the device. The purpose of this study is to attempt to solve these problems by molding the Cu coil of an induction cooker with polymer composites that have a low electrical conductivity but a high thermal conductivity. Among the several polymer composites tested in this study, an aluminum nitride-based composite showed the best performance. The results show that the new induction cooker with the molded composite can operate for an extended period of time without the use of a cooling fan. A further advantage of this new type of induction cooker is that the temperature of the substance in the cooking pot increases more rapidly, indicating an increased efficiency of the induction cooker.

• 한국공간구조학회논문집
• /
• 제3권3호
• /
• pp.85-93
• /
• 2003

Steel, concrete and their combination materials are the most 6commonly used materials for civil engineering structural systems such as buildings, bridge structures and other structures. Recently, however, fiber reinforced polymer (FRP) composites, a relatively new composite material made of fibers and polymer resins, have been gradually used in structural systems as an alternative structural material. This paper describes a comparison of design strength equations for steel column and FRP composite column based on design philosophies. The safety factors used in allowable stress design (ASD) are relatively higher in FRP structural design than steel structural design. Column critical stress equations of FRP composites column from an experimental study can be represented by Euler elastic buckling equation at the long-range of slenderness, and an exponential form at the short-range of slenderness as defined in Load and Resistance Factor Design (LRFD) of steel column. The column strength of steel and FRP composite columns in large slenderness is independent of material strength, this result verified the elastic buckling equation as derived by Eq. (15) and Eq. (5).

• Elastomers and Composites
• /
• 제57권3호
• /
• pp.81-91
• /
• 2022

Composites based on engineering thermoplastics exhibit excellent mechanical and thermal properties and simple processing and reprocessing attributes, and are widely used in the aerospace, three-dimensional (3D) printing, and automobile industries. Polyphenylene sulfide (PPS) is one of the most desirable engineering thermoplastics, owing to its superior thermal performance, inherent flame retardancy resulting from the presence of sulfur in its backbone structure, chemical resistance, and satisfactory electrical properties. However, pure PPS resin has limited applicability owing to its brittleness. To compensate for these shortcomings, various filler materials are frequently used in the manufacture of PPS composites. In this review, we would like to present the correlation between the structure and physical properties of PPS composite materials using various fillers.

• 한국건축시공학회지
• /
• 제22권1호
• /
• pp.23-34
• /
• 2022

본 연구의 목적은 RC 구조물의 균열 보수용 폴리머 시멘트 복합체의 접착성능을 평가하기 위함이다. 폴리머 시멘트 복합체는 시멘트, 폴리머와 실리카흄으로 제조하였으며, 점도가 700mPa·s 이하가 되도록 물시멘트비와 AE 감수제의 혼입량을 조정하였다. 연구결과, Type-A 인장접착강도는 폴리머계 마감 재료의 접착기준인 1.0MPa을 상회하였으며, 폴리머 종류에 따라 SAE, EVA, SBR 순으로 높은 인장접착강도를 나타냈다. 또한 Type-B의 인장접착강도는 Type-A에 비해 최대 1/4.5의 낮은 강도를 나타냈으나 실리카흄의 혼입에 따른 상당한 강도개선 효과를 보였다. RC 구조물의 균열 보수에 필요한 점도와 접착성능을 위해 EVA와 SAE의 폴리머 시멘트비 80%~100% 범위에서 일정량의 실리카 흄을 혼입하는 조건을 최적배합설계로 제안할 수 있었다.

• 한국세라믹학회지
• /
• 제29권4호
• /
• pp.298-304
• /
• 1992

Flexural strength, microstructure, hydration reaction and moisture sensitivity in macro defect-free (MDF) cement, which basically prepared of high alumina cement (HAC) and hydroxypropyl methylcellulose (HPMC) and polyvinylalcohol (PVA) as water soluble polymer were investigated. Cement composites based on HAC-PVA system were improved in flexural strength than that of HAC-HPMC system especially, the strength of specimens added to 10 wt% of polyvinylalcohol was 160 MPa. These improvements of flexural strength were attributed to not only the effect of water soluble polymer in elimination of macropores (above 100 $\mu\textrm{m}$) and cement grain bridging, but the effect of unhydrate cement as an aggregate. Moisture sensitivity and flexural strength in wet condition of MDF cement composites immersed in water at 80$^{\circ}C$ for 3 days were decreased.

• 신재생에너지
• /
• 제4권4호
• /
• pp.50-55
• /
• 2008

Recently, sea algae cultivation as carbon sink and carbon dioxide fixation have been considered. Also, various researches on bioenergy derived from sea algae and the utilization of fibers, saccharide, and lipid of sea algae have been performing. Till now, algae fibers has been used for manufacturing of paper and reinforcing of polymer composites and the extracts of sea algae are used for cosmetics, pharmaceutical materials and food such as agar. Especially, algae fiber has so similar properties to cellulose in terms of crystallinity and functional groups that it can be utilized as reinforcements of biocomposites. Biocomposites as alternatives of glass fiber reinforced polymer composites are environmentally friendly polymer composites reinforced with natural fibers and are actively applying to the automobiles and construction industries. In this paper, characteristics of algae fiber and biocomposites reinforced with algae fiber as environmentally friendly energy materials have been introduced.

• Macromolecular Research
• /
• 제8권4호
• /
• pp.153-164
• /
• 2000

By electrodeposition (ED) using a monomeric- and two polymeric coupling agents, the interfacial shear strength (IFSS) of carbon fiber/epoxy composites was investigated by fragmentation test. ED results were compared with the dipping and the untreated cases under dry and wet conditions. Multi-fiber composites (MFC) were used for the direct comparison for the untreated and the treated cases. Various treating conditions including time, concentration and temperature were evaluated, respectively. Under dry and wet conditions ED treatment exhibited much higher IFSS improvement compared to the dipping and the untreated cases. Monomeric- and polymeric coupling agents exhibited the comparative IFSS improvement. Adsorption mechanism between coupling agents and carbon fiber was analyzed in terms of the electrolyte molecular interactions during ED process based on to the chain mobility. The microfailure modes occurring from the fiber break, matrix and interlayer cracks were correlated to IFSS.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.874-878
• /
• 2009

Photorefractive polymer composites were synthesized based on poly (N-vinylcazbazole) (PVK) doped with liquid nonlinear optical chromophores and a sensitizer $C_{60}$. PVK/liquid NLO chromophores/$C_{60}$ devices showed no signs of phase separation and did not require a plasticizer, such as ethylcarbazole. The composites showed 69% diffraction efficiency (C3) and a rapid response time of 46 ms (C1) in four-wave mixing experiments at a light intensity of $60\;mW/cm^2$ and a wavelength of 633 nm.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.304-307
• /
• 2015

Carbon nanotubes (CNTs) have been widely accepted and used as the enhancer for polymer nano-composites due to their remarkable mechanical properties. Understandably, the CNT fiber-polymer matrix interface plays a major role in determining the properties of the CNT-polymer nano-composites. Here, using the LCAODFT Lab tool available on the EDISON Nano-Physics site, we performed first-principles density-functional theory calculations to determine the atomic configurations and binding energies of the CNTs in contact with polymers. For the polymer matrixes, we chose poly(acrylonitrile) (PAN), which is one of the most well-known polymer matrixes for the carbon nanofiber nanocomposites. Different chiralities and diameters of pristine CNTs were considered, and several PAN-CNT configurations were prepared based on the atomistic positions and directions of cyano group in PAN. The most favorable configuration of PAN was obtained when the PAN bound parallel to the surface of CNT. Our finding indicates the binding configurations are determined by the direction of the cyano group dominantly rather than the atomistic position of PAN, or the symmetry of CNTs. The result of increasing the length of CNT diameter suggests that PAN is inclinable to align evenly on the surface of relatively large size of CNT with the configuration parallel to the surface. These results obtained in this study will provide the starting point for the design of improved PAN-CNT composites for the next-generation ultra-strong and ultra-light carbon nanofibers.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2949-2954
• /
• 2012

Nano ZnO with an average size of 8 nm was prepared by thermal decomposition of zinc oxalate at $450^{\circ}C$. A series of based composite polymer electrolyte PEO-$LiClO_4$ and nano ZnO as a filler have been synthesized using solution cast technique, with varying the filler ratio systematically. XRD, DSC and FTIR studies have been conducted to investigate the structure and interaction of different groups in the composite polymer electrolyte. Effect of nano ZnO ceramic filler concentration on the structure of composites and their electrical properties (DC-conductivity, AC-conductivity, dielectric constant, dielectric loss and impedance) at different frequencies and temperatures was studied. Melting temperature ($T_m$) of PEO decreased with the addition of both $LiClO_4$ salt and nano ZnO filler due to increasing the amorphous state of polymer. All composite samples showed an ionic conductivity. The maximum room temperature ionic conductivity is found for $(ZnO)_{0.5}(PEO)_{12}(LiClO_4)$ composite sample. All the results are correlated and discussed.