• 한국고분자학회지:고분자과학과기술
• /
• 제2권5호
• /
• pp.341-354
• /
• 1991

• 펄프종이기술
• /
• 제42권1호
• /
• pp.54-63
• /
• 2010

Recently, as the function of largest supplier of biomass for "low carbon green growth", the necessity for systematic management of afforestation areas is emphasizing. The forestation of seedling, besides the afforestation cost itself, is required some additional follow-up management costs, like mowing and fertilizing of forestation area, and removal of bindweed. The mulching mat for afforestation seedlings is available for rooting of little seedlings as well as initial forestation expenses. Mulching technique is also used to control soil temperature and moisture by covering the surface of ground. In this study, the paper based-mulching film coated with biodegradable polymer and functional additive was specially produced using laboratory bar coater, and analyzed for its degradable behavior. Coating colors were prepared by dissolving PE (polyester) 80 % and PLA(polylactic acid) 20 % in chloroform and finally applied to handsheet prepared by preceding study conditions. Base paper and polymer-coated paper were artificially aged by 2 kinds of degradation methods, which are soil degradation by microorganism and light degradation by 257 nm UV wavelengths. Strength property, oxidation index and morphological property were evaluated by reduction rates of tensile strength, FTIR spectra ratio of carboxyl and carbonyl group and SEM micrograph. As these results, polymer coated-paper was superior to base paper in degradation behaviors, having results with lower reduction rate of strength properties.

• Korean Chemical Engineering Research
• /
• 제61권3호
• /
• pp.356-361
• /
• 2023

고분자 전해질 연료전지(PEMFC) 내구성 향상을 위해서 고분자 막의 내구성을 짧은 시간에 정확히 평가하는 것은 중요하다. 고분자 막의 화학적 가속 내구 평가 시험 조건은 고전압, 고온, 저가습, 고가스압이다. 이들 조건들을 변화시키며 프로토콜을 개발한다고 할 수 있다. 그러나 각 시험 조건이 고분자 막을 열화시키는데 상대적으로 얼마나 많은 영향을 주는지 연구되지 않았다. 고분자 막 화학적 가속 열화 실험에서 4가지 인자(조건)들의 영향력을 요인실험법을 통해 검토하였다. 가속 열화 후 고분자 막 열화 정도는 수소투과도와 불소 이온 유출 농도 측정으로 알 수 있었고, 불소 이온 농도 차이에 의해 8 조건의 고분자 막 열화 순위를 결정할 수 있었다. 고분자 막 열화 인자의 영향력은 전압> 온도 > 산소압 > 습도 순임을 보였다. 고분자 막 화학적 열화에 전극 촉매 열화가 영향을 줌을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권2호
• /
• pp.126-135
• /
• 1997

Drag reduction in polymer solutions is the phenomenon where by extremely dilute solutions of high molecular weight polymers exhibit frictional resistance to flow much lower than the pure solvent. This effect, largely unexplained as yet, has attracted the attention of polymer scientists and fluid flow specialists. Although applications are beginning to appear, the principle interest to data has been in attempting to relate the effect to the fluid mechanics of turbulent flow. Drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, and pool and boiling flow. But the research on drag reduction in two phase flow is not intensively investigated. Therefore, experimental investigations have been carried out to analyze the drag reduction produced by polymer addition in the single phase and two phase flow system. The objectives of the proposed investigation are primarily in identifying and developing high performance polymer additives for fluid transportations with the benefits of turbulent drag. Also we want to is to evaluate the drag reduction in horizontal flow by measuring pressure drop and mean velocity. Experimental results show higher drag reduction using co - polymer(A611P) then using polyacrylamide (PAAM) and faster degradation using PAAM than using A611P under the same superficial velocity.

• 태양에너지
• /
• 제20권2호
• /
• pp.85-96
• /
• 2000

When the liquid with the additive of ppm unit of a polymer flows, the pressure drop can be manifestly decreased compared to that of pure liquid: that's the drag reduction. This method is that a small amount of a polymer which doesn't make the transformation of the properties of the working fluid is dissolved into the working fluid, the links of chains of the polymer do a buffer action to the molecules of the working fluid which come out between near the wall of the pipe and the interface, so that the pressure drop is dramatically decreased. When we transport the fluid, therefore, we can save a lot of pumping power, or we can increase the transportation capacity with using the same transportation equipment. But when a polymer solution is also flowing in the fluid transportation system, the degradation which have a very close relation with the phenomena of the drag reduction occurs necessarily. When adding polymer to reduce the drag in two phase flow system, It is impossible to find some studies. This study is focussing on a searching examination for the experimental study considering the mechanical degradation in the closed tow phase system to find out the conditions which could improve the pump capacity.

• 대한화학회지
• /
• 제31권6호
• /
• pp.590-600
• /
• 1987

bis(p-chlorocarbonylphenyl)diphenylsilane (BCCDPS)과 pyromellitic dianhydride(PMDA) 및 몇가지의 디아민으로부터 실리콘을 함유하고 있는 폴리아미드-이미드를 합성하였다. 열중량분석기를 이용하여 합성한 중합체의 열적성질을 조사하였으며 Friedman 방법으로 중합체 열분해 반응의 활성화에너지를 구하였다. 중합체 분자내의 bis(p-carbonylphenyl)diphenylsilane units(BCDPS) 단위의 함량이 증가할수록 열안정성과 열분해 반응의 활성화에너지값은 감소하였으나 용매에 대한 용해성은 증가하였다.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2871-2876
• /
• 2022

The sensitivity of polymer-based capacitive relative humidity (RH) sensors after irradiation with neutrons, electrons and protons was measured. Degradation consists of the decreasing of the upper RH limit that can be measured. At the same time, low RH-level sensitivity is almost stable. After 30 krad of absorption dose, RH cut off is equal to 85% of max value, after 60 krad-40%. Degradation reduces after annealing which indicates high radiation sensitivity of the internal circuit in comparison to RH-sensing polymer film.

• 한국농공학회논문집
• /
• 제53권5호
• /
• pp.17-23
• /
• 2011

Steel clapping plate is used to connecting rubber body in rubber dam. However, once the steel clapping plate corrodes, it may cause faults, such as the same problems experienced by typical reinforcing steel. This study evaluated the applicability of glass fiber reinforced polymer composite(GFRP) clapping plate as a substitute for steel clapping plate. Absorption and load test were conducted to evaluate the decrease in durability of GFRP clapping plate exposed to deterioration environments. In the durability test results, the absorption rate of GFRP clapping plate was appeared as 0.6~1.0% in 50 day of immersion time. Also, the fracture load decreased with accelerated degradation environment exposure. Moreover, the absorption rate in GFRP clapping plate increased as degradation progressed, reducing the fracture load.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.199-202
• /
• 1998

In examining application of polymer as electrical insulators, it is very important to perform accelerated aging test substituted the process which polymer insulator is degraded for long-time by the process of short-time. The purpose of this paper is to examine the properties of water degradation which affect on the efficiency of epoxy insulator. To do this, the surface properties on epoxy insulating material have been investigated after long-time accelerated degradation in boiling water condition. The experimental results showed the contact angle and surface resistivity after treatment to decrease the sample of water treatment. In dielectric properties, dielectric constant was increased by the aging development with water treatments.

• 폴리머
• /
• 제34권2호
• /
• pp.172-177
• /
• 2010

최근 20년간 다양한 세포에서 파크리탁셀(PTX)의 효과에 관한 연구는 많이 있지만, 세포증식을 억제하기 위한 약물방출 동역학에 관한 연구는 거의 보고되지 않고 있다. 본 연구에서는 약물방출스텐트 (DES)에 적용하기 위해서 생분해성 고분자로부터 파크리탁셀의 방출거동을 고찰하였다. 다양한 생분해성 고분자인 poly(lactic acid-co-glycolic acid) (PLGA), poly-L-lactide(PLLA) 및 polycaprolactone(PCL)에 파크리탁셀의 함유량을 달리하여 필름을 제조한 후 약물방출 거동을 평가하였다. 약물방출은 8주 동안 이루어졌으며 FE-SEM을 통해 고분자의 분해정도를 관찰하였다. PCL의 생분해 속도는 가장 느리지만 파크리탁셀의 함량이 같을 경우 PCL로부터의 파크리탁셀 방출속도가 가장 빨랐으며 PLGA 그리고 PLLA 순서를 보였다. 이와 같은 결과를 바탕으로 PCL과 같이 유리전이온도($T_g$)가 낮은 고분자의 경우 체내에서 파크리탁셀과 같은 소수성 약물의 움직임이 용이하기 때문에 약물방출 속도가 빠를 수 있음을 제시하고 있다.