• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.302-306
• /
• 2019

We investigated a solution-derived $Y_2O_3$ film treated by ion beam (IB) irradiation as a liquid crystal (LC) alignment layer. With IB irradiation, homogeneous LC alignment was achieved irrespective of the annealing temperature. To verify the effect of IB irradiation, we conducted surface analyses such as X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). As $Y_2O_3$ is a high-k material, the electro-optical properties of the twisted nematic (TN) cells were superior to those of conventional TN cells based on a rubbed polymer, with an LC rising time of 4.1ms and falling time of 2.9ms. The IB-irradiated $Y_2O_3$ is a good alternative as an alignment layer for fast-switching TN LC displays.

• Journal of the Optical Society of Korea
• /
• 제5권1호
• /
• pp.16-19
• /
• 2001

A photopolymer, copoly (M4Ch-ChMA), copoly ((4-methacryloyloxy) chalcone-cholesteryl methacrylate), was synthesized in this study. The electro-optical (EO) characteristics for the photo-aligned vertical-alignment (VA)-liquid crystal display (LCD) were investigated. Excellent voltage-transmittance curves for the VA-LCD photo-aligned by polarized UV exposure on the copoly (M4Ch-ChMA) surface were observed. The response time for the photo-aligned VA-LCD decrease with increasing UV exposure time. consequently, the photo-dimerized chalcone moiety increased with increasing UV exposure time, which then contributed to a low response time for the VA-LCD photo-aligned.

• Journal of Information Display
• /
• 제10권4호
• /
• pp.175-179
• /
• 2009

As the physical properties of nematic liquid crystals vary with respect to temperature, the performances of liquid crystal displays (LCDs) are highly dependent on temperature. Additionally, it is well known that the electro-optic characteristics of LCDs, such as transmittance and threshold voltage, also rely on the LCD switching modes. The temperature dependence of the electro-optic characteristics of the wide-viewing-angle LCD modes, such as in-plane switching (IPS), multidomain vertical alignment by patterned electrode (PVA), and fringe-field switching (FFS), have been studied, and the results showed that the FFS mode has lower temperature dependence compared to the IPS and PVA modes. Since the liquid crystal (LC) reorients in different ways in each mode, this result is associated with the temperature dependence of LC's bend and twist elastic constants, and also with the position of the main reorientation, either in the middle or on the surface of the LC layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.42-42
• /
• 2008

Considerable attention has been focused on the applications of flexible liquid crystal (LC)-based displays because of their many potential advantages, such as portability, durability, light weight, thin packaging, flexibility, and low power consumption. To develop flexible LCDs that are capable of delivering high-quality moving images, like conventional glass-substrate LCDs, the LC device structure must have a stable alignment layer of LC molecules, concurrently support uniform cell gaps, and tightly bind two flexible substrates under external tension. However, stable LC molecular alignment has not been achieved because of the layerless LC alignment, and consequently high-quality images cannot be guaranteed. To solve these critical problems, we have proposed a PDMS pixel-wall based bonding method via the IB irradiation was developed for fasten the two substrates together strongly and maintain uniform cell gaps. The effect of the IB irradiation on PDMS with PI surface was also evaluated by side structure configuration and a result of x-ray photoelectron spectroscopic analysis of PDMS interlayer as a function of binder with substrates. large number of PDMS pixel-walls are tightly fastened to the surface of each flexible substrate and could maintain a constant cell gap between the LC molecules without using any other epoxy or polymer. To enhance the electro-optical performance of the LC device, we applied an alignment method that creates pretilt angle on the PI surface via ion beam irradiation. Using this approach, our flexible LCDs have a contrast ratio of 132:1 and a response time of about 15 ms, resulting in highly reliable electro-optical performance in the bent state, comparable to that of glass-substrate LCDs.

• 폴리머
• /
• 제34권1호
• /
• pp.32-37
• /
• 2010

액정표시소자의 광배향막으로 적용하기 위하여 올리고머 신나메이트와 폴리(비닐 신나메이트) (PVCi)의 블렌드를 이용하여 그루브 패턴을 형성하고 광배향 특성을 관찰하였다. UV-vis 스펙트럼 분광계를 이용하여 자외선 조사 시간에 따른 광반응 속도를 평가한 결과 올리고머 신나메이트는 폴리(비닐 신나메이트)에 비해 빠른 반응속도를 나타내었다. 폴리(비닐 신나메이트)를 주성분으로 하여 올리고머 신나메이트를 블렌드한 경우 반응속도가 약간 향상되는 특성을 확인하였다. 올리고머 신나메이트는 높은 결정성으로 인해 표면 그루브 패턴을 단독으로 형성할 수 없었지만 폴리(비닐 신나메이트)와의 블렌드를 통하여 그루브 패턴을 형성할 수 있었으며 그루브 패턴에서도 polar plot에 의해 분자 배향성을 나타냄을 확인하였다. 올리고머 신나메이트와 고분자계 신나메이트의 블렌드를 통하여 반응속도의 향상과 박막 구조의 패턴을 형성하기에 적합함의 확인을 통해 새로운 광배향막 재료로 적용 가능함을 알 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제1권3호
• /
• pp.10-13
• /
• 2000

In this study the new photo-alignment material copoly(PM4Ch-ChMa)(copoly (poly (4-methancryloyloxy)chalcone-cholesteryl methacry late)) was synthesized, Also, the liquid crystal (LC) aligning capabilities and the electro-optical(EO) characteristics for the photo-aligned vertical-aligned(VA)-LC display(LCD) were studied. The monodomain alignment of the NLC for the photo-aligned VA-LCD by linearly polarized UB exposure on the Photo-dimerized copoly(PM4Ch-ChMA) surface was observed,. Excellent Voltage-transmittance characteristics for the VA-LCD photo-aligned by polarized UV exposure on the copoly (PM4Ch-ChMA) surfaces for 1 min was achieved. The response time of the VA-LCD photo-aligned by polarized UV exposure on the copoly (PM4Ch-ChMA) surfaces for 1 min was 39.3 ms, We suggest that the photo-dimerized chacone group increased with increasing UV exposure time, which then contributes to a low response time of the photo-aligned VA-LCD on the copoly (PM4Ch-ChMA) surfaces.

• 전기학회논문지P
• /
• 제62권4호
• /
• pp.223-226
• /
• 2013

In this study, we investigated the electro-optical(EO) characteristic of fringe-field switching(FFS) mode cell by the two kinds of ultraviolet(UV) alignment method on the organic thin film(polyimide: PI). The suitable organic layersfor FFS cell and the aligning capabilities of nematic liquid crystal(NLC) using the in-situ photoalignment method were studied Disclination is observed after conventional photoalignment method for 1h, and in-situ photoalignment method for 1h. Monodomain alignment of the NLC can be observed via in-situ photoalignment method for 2h and 3h. It is considered that NLC alignment is due to photo-depolymerization of the polymer with oblique non-polarized UV irradiation on PI surface. An unstable V-T curve of UV-aligned FFS-LCD with conventional photoalignment method can be achieved. However, a stable V-T curve of UV-aligned FFS-LCD with in-situ photoalignment method(1h), and V-T curve of UV-aligned FFS-LCD with in-situphotoalignment method was much stable comparing with that of other UV-aligned FFS-LCD's. As a result, more stable EO performanceof UV-aligned FFS-LCD with in-situphotoalignment method for 3h is obtained than that of the other UV-aligned FFS-LCD's.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.403-404
• /
• 2007

Compound eyes in nature present intriguing topics in physiological optics due to their unique optical scheme for imaging. For example, a bee's eye has thousands of integrated photonic units called ommatidia spherically arranged along a curvilinear surface so that each unit points in a different direction. The omni-directionally arranged ommatidium collects incident light with a narrow range of angular acceptance and independently contributes to the capability of wide field-of-view (FOV) detection. Artificial implementation of compound eyes has attracted a great deal of research interest because the wide FOV exhibits a huge potential for medical, industrial, and military applications. So far, imaging with a FOV over $90^{\circ}$ has been achieved only with fisheye lenses which rely on bulky and expensive multiple lenses and require stringent alignment. In this talk, we will discuss about the spherical 3D arrangement of the photonic structures of biologically inspired artificial compound eyes in a small form-factor to have and the functional and anatomical similiarity with natural compound eyes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.899-902
• /
• 2004

The molecular reorientations and surface morphologies of rubbed films formed from atactic polystyrene (PS) samples with various molecular weights were investigated in detail. Previously unknown surface topography features were newly discovered in rubbed films, depending on molecular weights: submicroscale groove-like meandering structures composed of fine-grooves like pebbles in tens nanometers are present, oriented perpendicular to the rubbing direction. The vinyl main chains, however, were preferentially reoriented along the rubbing direction and the planes of the phenyl side groups were preferentially reoriented perpendicular to the rubbing direction with para-directions that were positioned nearly normal to the film plane. Nematic liquid crystal (LC) molecules were found to always align on the rubbed PS surfaces along the orientation direction of the submicroscale grooves generated by rubbing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.502-505
• /
• 2003

We synthesized high thermal photoalignment material with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below $1^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms.